Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test on conductors and strands

This document specifies a method of measuring the tensile properties of stranded conductors, single strands, solid conductors and braids.
When required, it can be used also on insulated wires and cables after removing the insulation.
It is intended to be used together with EN 3475-100.

Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren - Teil 505: Zugfestigkeit der Einzeldrähte und Leiterseile

Dieses Dokument legt ein Verfahren zur Bestimmung der Zugeigenschaften von mehrdrähtigen Leitern, eindrähtigen Leitern, Einzeldrähten und Schirmgeflechten fest.
Falls erforderlich, kann es auch für isolierte Drähte und Leitungen verwendet werden, nachdem die Isolierung entfernt wurde.
Es ist vorgesehen, dass es in Verbindung mit EN 3475 100 angewendet wird.

Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais - Partie 505 : Résistance à la traction des conducteurs et des brins

Le présent document spécifie une méthode pour mesurer les propriétés de résistance à la traction des conducteurs câblés, des brins simples, des conducteurs solides et des tresses.
Si exigé, la méthode peut également être utilisée sur des fils et des câbles isolés après avoir retiré l’isolant.
Il est destiné à être utilisé conjointement avec l’EN 3475-100.

Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode - 505. del: Natezni preskus vodnikov in žic

Ta dokument določa metodo za merjenje nateznih pletenih vodnikov, vodnikov, trdnih vodnikov in opletov.
Po potrebi se lahko uporablja tudi za dokončane kable.
Dokument je treba uporabljati v povezavi s standardom EN 3475-100.

General Information

Status
Published
Publication Date
28-Feb-2023
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
01-Mar-2023
Completion Date
01-Mar-2023

Relations

Buy Standard

Standard
EN 3475-505:2023 - BARVE
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-maj-2023
Aeronavtika - Električni kabli za uporabo v zračnih plovilih - Preskusne metode -
505. del: Natezni preskus vodnikov in žic
Aerospace series - Cables, electrical, aircraft use - Test methods - Part 505: Tensile test
on conductors and strands
Luft- und Raumfahrt - Elektrische Leitungen für Luftfahrtverwendung - Prüfverfahren -
Teil 505: Zugfestigkeit der Einzeldrähte und Leiterseile
Série aérospatiale - Câbles électriques à usage aéronautique - Méthodes d'essais -
Partie 505 : Résistance à la traction des conducteurs et des brins
Ta slovenski standard je istoveten z: EN 3475-505:2023
ICS:
29.060.20 Kabli Cables
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN 3475-505
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2023
EUROPÄISCHE NORM
ICS 49.060 Supersedes EN 3475-505:2012
English Version
Aerospace series - Cables, electrical, aircraft use - Test
methods - Part 505: Tensile test on conductors and
strands
Série aérospatiale - Câbles électriques à usage Luft- und Raumfahrt - Elektrischen Leitungen für
aéronautique - Méthodes d'essais - Partie 505 : Luftfahrt-Verwendung - Prüfverfahren - Teil 505:
Résistance à la traction des conducteurs et des brins Zugfestigkeit der Einzeldrähte und Leiterseile
This European Standard was approved by CEN on 2 October 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 3475-505:2023 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Apparatus . 6
5 Method . 6
5.1 Stranded conductor. 6
5.2 Single strand or solid conductor . 6
5.3 Braid . 7
6 Requirements . 8
Bibliography . 9

European foreword
This document (EN 3475-505:2023) has been prepared by the Aerospace and Defence Industries
Association of Europe — Standardization (ASD-STAN).
After enquiries and votes carried out in accordance with the rules of this Association, this
document has received the approval of the National Associations and the Official Services of the
member countries of ASD, prior to its presentation to CEN.
This document shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by September 2023, and conflicting national standards shall
be withdrawn at the latest by September 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such
patent rights.
This document supersedes EN 3475-505:2012.
According to the CEN-CENELEC Internal Regulations, the national standards organisations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Irela
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.