CEN/TS 13126-2:2004
(Main)Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 2: Casement fastener handles
Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 2: Casement fastener handles
This Part of Technical Specification 13126 specifies the requirements and test methods for durability, strength, security and function of casement fastener handles. It applies to all face fixed casement fastener handles fitted to hinged or pivoted windows made from any material.
NOTE There are limitations to the size and mass of windows fastened by these components, related to the physical ability of the user. The use of single fasteners should be restricted to windows of 0,9 m2 and a maximum height of 1 400 mm. Above that size, additional fasteners are recommended.
The components are not recommended for use on door height windows
Baubeschläge, Beschläge für Fenster und Fenstertüren - Anforderungen und Prüfverfahren - Teil 2: Fenstergriffe
Dieser Teil der Technischen Spezifikation 13126 legt die Anforderungen an und Prüfverfahren für die Dauerfunktionstüchtigkeit, Festigkeit, Schutzwirkung und Funktionsweise von Fenstergriffen fest. Er gilt für sämtliche aufgesetzt an Klapp- oder Schwingflügelfenstern befestigte Fenstergriffe aus beliebigen Werkstoffen.
ANMERKUNG Bezogen auf das körperliche Vermögen des Benutzers bestehen Einschränkungen hinsichtlich Größe und Masse von Fenstern, die mit diesen Teilen verriegelt werden. Der Gebrauch von einzelnen Fenster-riegeln sollte sich auf Fenster von 0,9 m2 mit einer maximalen Höhe von 1 400 mm beschränken. Bei größeren Maßen werden zusätzliche Fensterriegel empfohlen.
Die Teile werden nicht für den Gebrauch bei Fenstertüren empfohlen.
Quincaillerie pour le bâtiment, ferrures de fenêtres et portes-fenêtres - Exigences et méthodes d'essai - Partie 2 : Poignées à ergot de verrouillage
La présente partie du CEN/TS 13126 spécifie les exigences et méthodes d'essai relatives à l'endurance, à la résistance, à la sécurité des biens et au fonctionnement des poignées à ergot de verrouillage. Elle s'applique à toutes les poignées à ergot de verrouillage fixées sur la face des fenêtres articulées ou pivotantes, quel que soit le matériau constituant ces fenêtres.
NOTE Les moyens physiques de l'utilisateur imposent des limites quant aux dimensions et à la masse des fenêtres équipées de ces composants. Il convient de limiter l'utilisation d'une seul poignée à ergot aux fenêtres surface maximale de 0,9 m2 et/ou d'une hauteur maximale de 1400 mm. Au-delà de ces dimensions, il est recommandé de monter plusieurs poignées.
Ces composants ne sont pas recommandés pour les portes-fenêtres.
Stavbno okovje, pritrjevalni sistemi za okna in zastekljena vrata – Zahteve in preskusne metode – 2. del: Okenska zapirala
General Information
- Status
- Withdrawn
- Publication Date
- 06-Apr-2004
- Withdrawal Date
- 11-Oct-2011
- Technical Committee
- CEN/TC 33 - Doors, windows, shutters and building hardware
- Drafting Committee
- CEN/TC 33/WG 4 - Building hardware
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Oct-2011
- Completion Date
- 12-Oct-2011
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 15-Oct-2011
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
CEN/TS 13126-2:2004 is a technical specification published by the European Committee for Standardization (CEN). Its full title is "Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 2: Casement fastener handles". This standard covers: This Part of Technical Specification 13126 specifies the requirements and test methods for durability, strength, security and function of casement fastener handles. It applies to all face fixed casement fastener handles fitted to hinged or pivoted windows made from any material. NOTE There are limitations to the size and mass of windows fastened by these components, related to the physical ability of the user. The use of single fasteners should be restricted to windows of 0,9 m2 and a maximum height of 1 400 mm. Above that size, additional fasteners are recommended. The components are not recommended for use on door height windows
This Part of Technical Specification 13126 specifies the requirements and test methods for durability, strength, security and function of casement fastener handles. It applies to all face fixed casement fastener handles fitted to hinged or pivoted windows made from any material. NOTE There are limitations to the size and mass of windows fastened by these components, related to the physical ability of the user. The use of single fasteners should be restricted to windows of 0,9 m2 and a maximum height of 1 400 mm. Above that size, additional fasteners are recommended. The components are not recommended for use on door height windows
CEN/TS 13126-2:2004 is classified under the following ICS (International Classification for Standards) categories: 91.190 - Building accessories. The ICS classification helps identify the subject area and facilitates finding related standards.
CEN/TS 13126-2:2004 has the following relationships with other standards: It is inter standard links to EN 13126-2:2011. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
CEN/TS 13126-2:2004 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
CEN/TS 13126-2:2004 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2005
Stavbno okovje, pritrjevalni sistemi za okna in zastekljena vrata – Zahteve in
preskusne metode – 2. del: Okenska zapirala
Building hardware, fittings for windows and door height windows - Requirements and
test methods - Part 2: Casement fastener handles
Baubeschläge, Beschläge für Fenster und Fenstertüren - Anforderungen und
Prüfverfahren - Teil 2: Fenstergriffe
Quincaillerie pour le bâtiment, ferrures de fenetres et portes-fenetres - Exigences et
méthodes d'essai - Partie 2 : Poignées a ergot de verrouillage
Ta slovenski standard je istoveten z: CEN/TS 13126-2:2004
ICS:
91.190 Stavbna oprema Building accessories
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
----------
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...