EN ISO 15245-2:2001

SLOVENSKI STANDARD
01-maj-2002
3OLQVNHMHNOHQNH&LOLQGULþQLQDYRML]DSULNOMXþLWHYYHQWLORYQDMHNOHQNHGHO
.RQWURODVNDOLEURP,62
Gas cylinders - Parallel threads for connection of valves to gas cylinders - Part 2: Gauge
inspection (ISO 15245-2:2001)
Ortsbewegliche Gasflaschen - Zylindrische Gewinde für den Anschluss von Ventilen an
Gasflaschen - Teil 2: Prüflehren (ISO 15245-2:2001)
Bouteilles a gaz - Filetages paralleles pour le raccordement des robinets sur les
bouteilles a gaz - Partie 2: Contrôle par calibre (ISO 15245-2:2001)
Ta slovenski standard je istoveten z: EN ISO 15245-2:2001
ICS:
21.040.30 Posebni navoji Special screw threads
23.020.30 7ODþQHSRVRGHSOLQVNH Pressure vessels, gas
MHNOHQNH cylinders
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 15245-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
October 2001
ICS 23.020.30
English version
Gas cylinders - Parallel threads for connection of valves to gas
cylinders - Part 2: Gauge inspection (ISO 15245-2:2001)
Bouteilles à gaz - Filetages parallèles pour le raccordement Ortsbewegliche Gasflaschen - Zylindrische Gewinde für
des robinets sur les bouteilles à gaz - Partie 2: Contrôle par den Anschluss von Ventilen an Gasflaschen - Teil 2:
calibre (ISO 15245-2:2001) Prüflehren (ISO 15245-2:2001)
This European Standard was approved by CEN on 10 October 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15245-2:2001 E
worldwide for CEN national Members.

CORRECTED 2002-01-02
Foreword
The text of the International Standard from Technical Committee ISO/TC 58 "Gas cylinders"
has been taken over as a European Standard by Technical Committee CEN/TC 23
"Transportable gas cylinders", the secretariat of which is held by BSI.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by April 2002, and conflicting national
standards shall be withdrawn at the latest by April 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United
Kingdom.
Endorsement notice
The text of the International Standard ISO 15245-2:2001 has been approved by CEN as a
European Standard without any modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
EN ISO 15245-1:2001 (E)
Annex ZA
(normative)
Normative references to international publications with their corresponding
European publications
This European Standard incorporates, by dated or undated reference, provisions from other
publications. These normativereferences are cited at the appropriate places in the text, and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications, indicated by
(mod.), the relevant EN/HD applies.
Publication Year Title EN/HD Year
ISO 15245-1 2001 Gas cylinders - Parallel threads for connection EN ISO 15245-1 2001
of valves to gas cylinders - Part 1:
Specification
INTERNATIONAL ISO
STANDARD 15245-2
First edition
2001-10-15
Gas cylinders — Parallel threads for
connection of valves to gas cylinders —
Part 2:
Gauge inspection
Bouteilles à gaz — Filetages parallèles pour le raccordement des robinets
sur les bouteilles à gaz —
Partie 2: Contrôle par calibre
Reference number
ISO 15245-2:2001(E)
©
ISO 2001
ISO 15245-2:2001(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe’s licensing policy, this file may be printed or viewed but shall not
be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In downloading this
file, parties accept therein the responsibility of not infringing Adobe’s licensing policy. The ISO Central Secretariat accepts no liability in this
area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation parameters
were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In the unlikely event
that a problem relating to it is found, please inform the Central Secretariat at the address given below.
©  ISO 2001
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or ISO's member body
in the country of the requester.
ISO copyright office
Case postale 56 CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.ch
Web www.iso.ch
Printed in Switzerland
ii © ISO 2001 – All rights reserved

ISO 15245-2:2001(E)
Contents Page
Foreword.iv
1 Scope .1
2 Normative references .1
3 Terms and definitions.1
4 Requirements .2
4.1 Materials.2
4.2 Thread profile .2
4.3 Thread rotation.2
4.4 Pitch .2
5 Gauge dimensions.3
6 Inspection gauges .3
7 Use of inspection gauges .5
7.1 Plain gauges.
...