EN ISO 14024:2018

SLOVENSKI STANDARD
01-julij-2018
1DGRPHãþD
SIST EN ISO 14024:2002
2NROMVNHR]QDþEHLQGHNODUDFLMH2NROMVNRR]QDþHYDQMH,YUVWH1DþHODLQ
SRVWRSNL,62
Environmental labels and declarations - Type I environmental labelling - Principles and
procedures
Marquage et déclarations environnementaux - Étiquetage environnemental de type I -
Principes et méthodes
Ta slovenski standard je istoveten z: EN ISO 14024:2018
ICS:
13.020.50 2]QDþHYDQMH]HNRORãNR Ecolabelling
QDOHSNR
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 14024
EUROPEAN STANDARD
NORME EUROPÉENNE
March 2018
EUROPÄISCHE NORM
ICS 13.020.50 Supersedes EN ISO 14024:2000
English Version
Environmental labels and declarations - Type I
environmental labelling - Principles and procedures (ISO
14024:2018)
Labels et déclarations environnementaux - Délivrance
du label environnemental de type I - Principes et
procédures (ISO 14024:2018)
This European Standard was approved by CEN on 21 March 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 14024:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 14024:2018) has been prepared by Technical Committee ISO/TC 207
"Environmental management".
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by September 2018, and conflicting national standards
shall be withdrawn at the latest by September 2018.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 14024:2000.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 14024:2018 has been approved by CEN as EN ISO 14024:2018 without any modification.

INTERNATIONAL ISO
STANDARD 14024
Second edition
2018-02
Environmental labels and
declarations — Type I environmental
labelling — Principles and procedures
Labels et déclarations environnementaux — Délivrance du label
environnemental de type I — Principes et procédures
Reference number
ISO 14024:2018(E)
©
ISO 2018
ISO 14024:2018(E)
© ISO 2018, Published in Switzerland
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form
or by any means, electronic or mechanical, including photocopying, or posting on the internet or an intranet, without prior
written permission. Permission can be requested from either ISO at the address below or ISO’s member body in the country of
the requester.
ISO copyright office
Ch. de Blandonnet 8 • CP 401
CH-1214 Vernier, Geneva, Switzerland
Tel. +41 22 749 01 11
Fax +41 22 749 09 47
copyright@iso.org
www.iso.org
ii © ISO 2018 – All rights reserved

ISO 14024:2018(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Objective of Type I environmental labelling . 3
5 Principles . 3
5.1 Voluntary nature of the programme . . 3
5.2 Relationship with ISO 14020 . 3
5.3 Use of ecolabels . 4
5.4 Life cycle consideration . 4
5.5 Selectivity . 4
5.6 Product environmental criteria . 4
5.6.1 Life cycle considerations . 4
5.6.2 Basis of criteria . 4
5.7 Product function characteristics. 4
5.8 Validity of programme requirements . 4
5.8.1 Period of validity . 4
5.8.2 Review period . 5
5.9 Consultation . 5
5.10 Compliance and verification . 5
5.11 Data quality . 5
5.12 Transparency . 5
5.13 Accessibility . 6
5.14 Scientific basis of product environmental criteria . 6
5.15 Avoidance of conflict of interest . 6
5.16 Competence of verifiers . 6
5.17 Costs and fees . 6
5.18 Confidentiality . 6
5.19 Mutual recognition . 6
6 Procedures . 7
6.1 General . 7
6.2 Consultation with interested parties . 7
6.3 Selection of product categories . 7
6.3.1 Conducting a feasibility study . 7
6.3.2 Proposal for product category . 8
6.4 Selection and development of product environmental criteria . 8
6.4.1 Selection of product environmental criteria . 8
6.4.2 Development of product environmental criteria . 8
6.5 Selection of product function characteristics . 9
6.6 Reporting and publication .10
6.7 Implementation of modifications to the product environmental criteria .10
7 Certification and compliance.10
7.1 General .10
7.2 Basic concepts .10
7.2.1 General.10
7.2.2 General rules .11
7.2.3 Product environmental criteria and product function characteristics for
each product category .11
7.3 Licensing .11
7.4 Procedures for assessing and demonstrating compliance .11
7.4.1 Basic principle .11
ISO 14024:2018(E)
7.4.2 Supervision and control .11
7.4.3 Supporting documentation .12
7.4.4 Declarations of conformity .12
7.4.5 Verification .12
7.5 Compliance monitoring .12
7.6 Protection of the label .13
Bibliography .14
iv © ISO 2018 – All rights reserved

ISO 14024:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to the
World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following
URL: www .iso .org/ iso/ foreword .html.
This document was prepared by Technical Committee ISO/TC 207, Environmental management,
Subcommittee SC 3, Environmental labelling.
This second edition cancels and replaces the first edition (ISO 14024:1999), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— addition of definitions for “verifier” (3.15) and “verification” (3.16);
— addition of subclauses on data quality (5.11) and the competence of verifiers (5.16);
— addition of paragraph on the competence of verifiers in 6.1;
— addition of subclause 7.4.5 on verification;
— updating of reference documents.
ISO 14024:2018(E)
Introduction
There are several approaches to environmental labelling. This document relates to Type I environmental
labelling programmes, which award their environmental label to products that meet a set of
predetermined requirements. The label identifies products that are determined to be environmentally
preferable within a particular product category.
Type I environmental labelling programmes are voluntary, can be operated by public or private agencies
and can be national, regional or international in nature.
vi © ISO 2018 – All rights reserved

INTERNATIONAL STANDARD ISO 14024:2018(E)
Environmental labels and declarations — Type I
environmental labelling — Principles and procedures
1 Scope
This document establishes the principles and procedures for developing Type I environmental labelling
programmes, including the selection of product categories, product environmental criteria and
product function characteristics, and for assessing and demonstrating compliance. This document also
establishes the certification procedures for awarding the label.
2 Normative references
The following documents are referred to in the text in such a way that some or all of their content
constitutes requirements of this document. For dated references, only the edition cited applies. For
undated references, the latest edition of the referenced document (including any amendments) applies.
ISO 14020, Environmental labels and declarations — General principles
3 Terms and definitions
For the purposes of this document, the following terms and definitions apply.
ISO and IEC maintain terminological databases for use in standardization at the following addresses:
— ISO Online browsing platform: available at https:// www .iso .org/ obp
— IEC Electropedia: available at http:// www .electropedia .org/
3.1
Type I environmental labelling programme
voluntary, multiple-criteria-based third party (3.7) programme that awards a licence (3.13) which
authorizes the use of environmental labels on products (3.2) indicating overall environmental
preferability of a product within a particular product category (3.3) based on life cycle considerations
[SOURCE: ISO 14050:2009, 8.3]
3.2
product
any goods or service
[SOURCE: ISO 14050:2009, 6.2, modified — Notes to entry have been deleted.]
3.3
product category
group of products (3.2) which have equivalent function
[SOURCE: ISO 14050:2009, 8.3.3]
3.4
product environmental criteria
environmental requirements that the product (3.2) shall meet in order to be awarded an
environmental label
[SOURCE: ISO 14050:2009, 8.3.3.3]
ISO 14024:2018(E)
3.5
product function characteristic
attribute or characteristic in the performance and use of a product (3.2)
[SOURCE: ISO 14050:2009, 8.3.3.2]
3.6
ecolabelling body
third party (3.7) body, and its agents, which conducts a Type I environmental labelling programme (3.1)
[SOURCE: ISO 14050:2009, 8.3.4]
3.7
third party
person or body that is recognized as being independent of the parties involved, as concerns the issue in
question
Note 1 to entry: “Parties involved” are usually supplier (“first party”) and purchaser (“second party”) interests.
[SOURCE: ISO 14050:2009, 3.7]
3.8
interested party
party affected by a Type I environmental labelling programme (3.1)
3.9
licensee
party authorized by an ecolabelling body (3.6) to use a Type I environmental label
[SOURCE: ISO 14050:2009, 8.3.2]
3.10
environmental aspect
element of an organization’s activities or products (3.2) that interacts or can interact with the
environment
Note 1 to entry: An environmental aspect can cause (an) environmental impact(s) (3.11). A significant
environmental aspect is one that has or can have one or more significant environmental impact(s).
Note 2 to entry: Significant environmental aspects are determined by the organization applying one or more
criteria.
[SOURCE: ISO 14001:2015, 3.2.2, modified — The words “or services” have been deleted.]
3.11
environmental impact
change to the environment, whether adverse or beneficial, wholly or partially resulting from an
organization’s environmental aspects (3.10)
[SOURCE: ISO 14001:2015, 3.2.4]
3.12
certification
procedure by which a third party (3.7) gives written assurance that a product (3.2) or process conforms
to specified requirements
[SOURCE: ISO 14050:2009, 3.10, modified — The words “a product, process or service” have been
replaced by “a product or process”.]
2 © ISO 2018 – All rights reserved

ISO 14024:2018(E)
3.13
licence (for Type I environmental labelling)
licence
document, issued under the rules of a certification (3.12) system, by which an ecolabelling body
(3.6) grants to a person or body the right to use Type I environmental labels for its products (3.2) in
accordance with the rules of the environmental labelling programme
[SOURCE: ISO 14050:2009, 8.3.1, modified — Second term “licence” has been added, and the words “or
services” have been deleted in the definition.]
3.14
fitness for purpose
ability of a product (3.2) or process to serve a defined purpose under specific conditions
[SOURCE: ISO 14050:2009, 8.3.3.1, modified — The words “a product, process or service” have been
replaced by “a product or process”.]
3.15
verifier
person or body that carries out verification (3.16)
[SOURCE: ISO 14050:2009, 5.3]
3.16
verification
confirmation, through the provision of objective evidence, that specified requirements have been
fulfilled
[SOURCE: ISO 14050:2009, 5.1]
4 Objective of Type I environmental labelling
The overall goal of environmental labels and declarations is to encourage, through communication of
verifiable and accurate information that is not misleading on environmental aspects of products, the
demand for and supply of those products that cause less stress on the environment, th
...