EN 13108-4:2016
(Main)Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt
This European Standard specifies requirements for mixtures of the mix group Hot Rolled Asphalt for use on roads, airfields and other trafficked areas. Hot Rolled Asphalt is used for surface courses, binder courses, regulating courses and bases.
The mixtures of the mix group Hot Rolled Asphalt are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard.
This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21.
Asphaltmischgut - Mischgutanforderungen - Teil 4: Hot Rolled Asphalt
Diese Europäische Norm legt Anforderungen an Mischgüter der Asphaltmischgutgruppe Hot-Rolled-Asphalt fest, die für die Verwendung beim Bau von Straßen, Flugplätzen und sonstigen Verkehrsflächen bestimmt sind. Hot-Rolled-Asphalt wird für Deckschichten, Binderschichten, Ausgleichsschichten und Tragschichten verwendet.
Die Mischgüter der Mischgutgruppe Hot-Rolled-Asphalt werden auf Basis von heißem Bitumen hergestellt. Mischgüter, die Bitumenemulsionen und bitumenhaltige Materialien auf der Basis der Wiederverwertung vor Ort enthalten, werden durch diese Norm nicht abgedeckt.
Diese Europäische Norm enthält Anforderungen an die Auswahl der Baustoffe. Sie ist in Verbindung mit FprEN 13108-20 und FprEN 13108-21 anzuwenden.
Mélanges bitumineux - Spécifications des matériaux - Partie 4: Hot Rolled Asphalt
Cette norme européenne spécifie les exigences relatives aux mélanges appartenant aux Hot Rolled Asphalt utilisables pour les routes, les aéroports et les autres zones de circulation.
Cette Norme européenne comporte des exigences pour la sélection des divers constituants. Elle est destinée à être utilisée conjointement avec le prEN 13108-20 et le prEN 13108-21.
Bitumenske zmesi - Specifikacije materialov - 4. del: Vroče valjani asfalt
Ta evropski standard določa zahteve za skupino zmesi vroče valjanih asfaltov za uporabo na cestah, letališčih in drugih prometnih površinah.
General Information
- Status
- Published
- Publication Date
- 14-Jun-2016
- Withdrawal Date
- 30-Mar-2018
- Technical Committee
- CEN/TC 227 - Road materials
- Drafting Committee
- CEN/TC 227/WG 1 - Bituminous mixtures
- Current Stage
- 9093 - Decision to confirm - Review Enquiry
- Start Date
- 02-Aug-2022
- Completion Date
- 14-Apr-2025
- Directive
- 89/106/EEC - Construction products
Relations
- Replaces
EN 13108-4:2006/AC:2008 - Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt - Effective Date
- 22-Jun-2016
- Replaces
EN 13108-4:2006 - Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt - Effective Date
- 25-Jul-2012
- Corrected By
EN 13108-4:2016/AC:2017 - Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt - Effective Date
- 02-Aug-2017
Overview
EN 13108-4:2016 - Bituminous mixtures: Material specifications - Part 4: Hot Rolled Asphalt (CEN) specifies performance and material requirements for Hot Rolled Asphalt (HRA) used on roads, airfields and other trafficked areas. It covers HRA for surface courses, binder courses, regulating courses and bases produced with hot bitumen. The standard excludes mixtures based on bitumen emulsion and in‑situ recycling. EN 13108-4:2016 is intended to be read alongside EN 13108-20 (Type Testing) and EN 13108-21 (Factory Production Control) and aligns with the EU Construction Products Regulation (CPR) via Annex ZA.
Key Topics
- Constituent material requirements
- Selection and properties of binders, coarse/fine aggregates, all‑in aggregates, added filler, reclaimed asphalt and additives.
- Specifications for coated chippings and natural asphalt (normative annexes).
- Mixture composition and grading
- Rules for composition, grading limits and minimum binder content to achieve specified performance.
- Performance properties
- Void content and minimum binder volume
- Water sensitivity and adhesion
- Resistance to permanent deformation (rutting)
- Stiffness and low temperature properties
- Coating and homogeneity, reaction to fire, and airfield‑specific resistance to fuels and de‑icing fluids
- Testing and assessment
- Test specimen preparation, temperature control, methods referenced (EN 12697 series, EN 1426/1427, EN 12591 etc.)
- Assessment and Verification of Constancy of Performance (AVCP) and identification requirements
Applications (Who uses this standard)
- Pavement designers and highway engineers specifying HRA mixes for roads and airfields.
- Asphalt producers and mix designers developing compliant HRA blends using hot bitumen.
- Contracting authorities and spec writers creating procurement/specification documents.
- Construction quality control labs conducting tests for grading, binder content, stiffness, rutting and water sensitivity.
- Airport pavement specialists requiring additional criteria for fuel and de‑icing resistance.
Practical use includes selecting constituent materials, defining mixture categories for specific traffic and climate conditions, and ensuring factory production control and type testing meet regulatory requirements.
Related Standards
- EN 13108-1 to EN 13108-9 (other bituminous mixture types)
- EN 13108-20: Type Testing
- EN 13108-21: Factory Production Control
- Relevant test methods: EN 12697 series, EN 1426, EN 1427, EN 12591
Keywords: EN 13108-4:2016, Hot Rolled Asphalt, bituminous mixtures, material specifications, road construction, airfields, asphalt mix design, CEN.
Frequently Asked Questions
EN 13108-4:2016 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt". This standard covers: This European Standard specifies requirements for mixtures of the mix group Hot Rolled Asphalt for use on roads, airfields and other trafficked areas. Hot Rolled Asphalt is used for surface courses, binder courses, regulating courses and bases. The mixtures of the mix group Hot Rolled Asphalt are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard. This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21.
This European Standard specifies requirements for mixtures of the mix group Hot Rolled Asphalt for use on roads, airfields and other trafficked areas. Hot Rolled Asphalt is used for surface courses, binder courses, regulating courses and bases. The mixtures of the mix group Hot Rolled Asphalt are produced on the basis of hot bitumen. Mixtures utilizing bitumen emulsion and bituminous materials based on in situ recycling are not covered by this standard. This European Standard includes requirements for the selection of the constituent materials. It is designed to be read in conjunction with EN 13108-20 and EN 13108-21.
EN 13108-4:2016 is classified under the following ICS (International Classification for Standards) categories: 93.080.20 - Road construction materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 13108-4:2016 has the following relationships with other standards: It is inter standard links to EN 13108-4:2006/AC:2008, EN 13108-4:2006, EN 13108-4:2016/AC:2017. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 13108-4:2016 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/124. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 13108-4:2016 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Asphaltmischgut - Mischgutanforderungen - Teil 4: Hot Rolled AsphaltMélanges bitumineux - Spécifications des matériaux - Partie 4: Hot Rolled AsphaltBituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt93.080.20Materiali za gradnjo cestRoad construction materialsICS:Ta slovenski standard je istoveten z:EN 13108-4:2016SIST EN 13108-4:2016en,fr,de01-november-2016SIST EN 13108-4:2016SLOVENSKI
STANDARDSIST EN 13108-4:2006/AC:2008SIST EN 13108-4:20061DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13108-4
June
t r s x ICS
{ uä r z rä t r Supersedes EN
s u s r zæ vã t r r xEnglish Version
Bituminous mixtures æ Material specifications æ Part
vã Hot Rolled Asphalt Mélanges bitumineux æ Spécifications des matériaux æ Partie
vã Hot Rolled Asphalt
Asphaltmischgut æ Mischgutanforderungen æ Teil
vã Hot Rolled Asphalt This European Standard was approved by CEN on
t y February
t r s xä
egulations which stipulate the conditions for giving this European Standard the status of a national standard without any alterationä Upætoædate lists and bibliographical references concerning such national standards may be obtained on application to the CENæCENELEC Management Centre or to any CEN memberä
translation under the responsibility of a CEN member into its own language and notified to the CENæCENELEC Management Centre has the same status as the official versionsä
CEN members are the national standards bodies of Austriaá Belgiumá Bulgariaá Croatiaá Cyprusá Czech Republicá Denmarká Estoniaá Finlandá Former Yugoslav Republic of Macedoniaá Franceá Germanyá Greeceá Hungaryá Icelandá Irelandá Italyá Latviaá Lithuaniaá Luxembourgá Maltaá Netherlandsá Norwayá Polandá Portugalá Romaniaá Slovakiaá Sloveniaá Spainá Swedená Switzerlandá Turkey and United Kingdomä
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels
t r s x CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Membersä Refä Noä EN
s u s r zæ vã t r s x ESIST EN 13108-4:2016
Calculations of the penetration or the softening point of the binder of a mixture when reclaimed asphalt is used . 29 A.1 General . 29 A.2 Calculation of the penetration of the binder of a mixture . 29 A.3 Calculation of the softening point of the binder of a mixture . 29 Annex B (normative)
Natural asphalt. 31 B.1 Scope . 31 B.2 Requirements . 31 B.3 Methods of use . 32 B.4 Determination of ash content . 32 Annex C (normative)
Coated chippings for application to Hot Rolled Asphalt surface course . 33 C.1 Scope . 33 C.2 Chippings . 33 C.3 Binder content . 33 C.4 Assessment and verification of constancy of performance . 33 C.5 Identification . 33 Annex ZA (informative)
Relationship of this European Standard with Regulation (EU) No. 305/2011 . 34 ZA.1 Scope and relevant characteristics . 34 ZA.2 Procedure for AVCP of Hot Rolled Asphalt . 35 ZA.3 Assignment of AVCP tasks . 36
35 %. 3.1.12 mix formulation composition of a single mixture expressed as a target composition Note 1 to entry: A target composition is expressed in one of two ways (see 3.1.13 and 3.1.14). SIST EN 13108-4:2016
% by mass 22,4 – – – – – – 100 100 100 100 100 100 100 100 16 – – 100 100 100 100 95 95 95 95 96 96 97 97 11,2 – – 100 95 97 97 67 to 83 67 to 83 62 to 81 62 to 81 52 to 72 52 to 72 42 to 63 42 to 63 8 100 100 82 to 88 67 to 83 42 to 63 42 to 63 – – – – – – – – 2 90 to 100 95 to 100 81 65 41 38 65 65 61 56 51 48 41 38 0,5 85 to 90 40 to 55 59 to 81 48 to 65 29 to 41 19 to 31 48 to 65 29 to 41 44 to 61 24 to 41 34 to 50 22 to 35 29 to 43 19 to 31 0,25 40 to 75 30 to 40 29 to 71 22 to 58 9 to 31 9 to 31 22 to 58 24 to 36 19 to 51 19 to 31 14 to 42 14 to 31 9 to 31 9 to 31 0,063 14,0 14,0 12,0 9,0 to 11,0 6,0 6,0 9,0 9,0 8,0 8,0 7,0 7,0 6,0 6,0 Table 4 — General grading requirements of target composition for surface course mixtures — Basic set plus set 2 D 0/2 F 0/2C 0/10F 15/10F 30/10F 45/10F 55/10F 55/10C 30/14F 30/14C 35/14F 35/14C 45/14F 55/14F 55/14C Sieve mm Passing sieve
% by mass 20 – – – – – – – – 100 100 100 100 100 100 100 14 – – 100 100 100 100 100 100 93 to 100 93 to 100 95 to 100 95 96 to 100 98 to 100 98 to 100 10 – – 90 to 100 100 93 to 100 96 to 100 98 to 100 98 to 100 67 to 83 67 to 83 62 to 81 62 to 81 52 to 72 42 to 63 42 to 63 6,3 100 100 73 to 88 82 to 88 67 to 83 52 to 72 42 to 63 42 to 63 – – – – – – – 2 98 to 100 98 to100 63 to 67 79 65 51 41 40 65 66 61 59 51 41 40 0,5 80 to 90 40 to 55 25 to 50 59 to 83 49 to 68 34 to 50 29 to 43 19 to 31 49 to 68 29 to 41 44 to 63 24 to 41 34 to 50 29 to 43 19 to 31 0,25 40 to 65 25 to 35 10 to 30 24 to 61 19 to 51 13 to 38 9 to 31 9 to 31 19 to 51 19 to 36 16 to 46 16 to 26 13 to 38 9 to 31 9 to 31 0,063 14,0 14,0 8,0 to 13,0 12,0 9,0 7,0 6,0 6,0 9,0 9,0 8,0 8,0 7,0 6,0 6,0 SIST EN 13108-4:2016
in surface course mixtures Designation 15/11 F 15/10 F 30/11 F 30/10 F 30/16F 30/14 F 35/16 F 35/14 F 45/16F 45/14F 45/10F 55/11 F 55/10 F 55/16 F 55/14 F Maximum percentage 18 14 14 13 11 9 9 5.2.3 Minimum binder content The minimum binder content may be defined in documents related to the application of the product and shall be selected to the nearest 0,1 %, between values of 4,6 % and 11,0 % for a mixture in which the aggregate density is assumed to be equal to 2,65 Mg/m3. The selected minimum binder content shall be expressed as Bminx where x is the minimum binder content in %. The minimum binder content of the mixture shall be corrected by multiplying by the factor αρ=2,650 (1) where
is the weighted mean of the particle density of the aggregates at the target grading, in megagrams per cubic metre (Mg/m3), determined according to the appropriate clause or Annex of EN 1097–6. The appropriate particle density according to EN 1097-6 shall be declared in the type test report. NOTE For normal weight aggregates with water absorption less than about 1,5 % the pre-dried particle density method as defined in EN 1097–6:2013, Annex A, is applicable for aggregates passing the 63 mm test sieve and retained on the 0,063 mm test sieve. EN 1097–6:2013, Annex G, is applicable to aggregates passing the 31,5 mm test sieve including the 0/0,063 mm size fraction. Based on experience in the place of use for certain specific aggregates with particular granulometric characteristics the corrected minimum binder content may be adjusted appropriately. The adjustment shall be defined in documents related to the application of the product. 5.3 Properties 5.3.1 Specimens For application of this European Standard specimens shall be in accordance with EN 13108-20:2016, 6.5. 5.3.2 Minimum binder volume The minimum binder volume shall be determined in accordance with EN 12697-8 using the conditions defined in EN 13108-20:2016, D.2. The range of categories of minimum binder volume at the target composition is defined in Table 6. SIST EN 13108-4:201
...
La norme EN 13108-4:2016 est une référence essentielle pour les mélanges bitumineux, plus précisément pour le groupe de mélange des asphaltes enroulés à chaud. Son domaine d'application se concentre sur la spécification des exigences des mélanges destinés à être utilisés sur les routes, les aérodromes et d'autres zones de circulation, ce qui souligne son importance dans l'infrastructure routière. L'un des principaux points forts de cette norme réside dans sa rigueur dans la sélection des matériaux constitutifs. Elle garantit que les exigences en matière de matériaux sont clairement définies, ce qui contribue à assurer une qualité uniforme dans la production d'asphalt. En intégrant des paramètres spécifiques, la norme facilite l'homogénéité et la durabilité des surfaces de roulement. Un autre aspect remarquable de la norme EN 13108-4:2016 est son interconnexion avec d'autres documents normatifs, notamment EN 13108-20 et EN 13108-21. Cette synergie permet une compréhension approfondie des différentes composantes et processus impliqués dans la fabrication et l'application des mélanges d'asphalte, apportant ainsi une valeur ajoutée aux professionnels du secteur. Il est aussi important de noter que la norme exclut clairement les mélanges utilisant de l’émulsion bitumineuse et les matériaux bitumineux basés sur le recyclage in situ. Cette précision permet d'éviter toute confusion et d'assurer que seuls les mélanges d'asphalte enroulé à chaud, basés sur du bitume chaud, soient couverts par les spécifications. Dans l'ensemble, la norme EN 13108-4:2016 représente une avancée significative dans la standardisation des mélanges bitumineux, en assurant des matériaux de haute qualité pour des applications critiques dans le domaine des infrastructures routières. Sa pertinence pour les praticiens de l’industrie, ainsi que pour les organismes de réglementation, est incontestablement forte, et elle s'affirme comme un instrument fondamental pour atteindre des normes élevées de sécurité et de performance.
Die Norm EN 13108-4:2016 stellt entscheidende Anforderungen für Mischungen der Gruppe Heißasphalt auf, die für den Einsatz in Straßen, Flugplätzen und anderen befahrenen Bereichen vorgesehen sind. Diese Norm ist besonders relevant, da sie spezifische Vorgaben für Oberbauschichten, Binderschichten, Ausgleichsschichten und Tragfähigkeits-schichten bietet. Ein wesentlicher Vorteil dieser Norm liegt in der klaren Definition der Materialanforderungen, die sicherstellen, dass die verwendeten Stoffe den hohen Belastungen und Anforderungen im Verkehrsbereich standhalten. Durch die Festlegung der Anforderungen an die Auswahl der Bestandteile wird eine konsistente Qualität der Heißasphaltmischungen gewährleistet. Dies ist insbesondere für die Lebensdauer und Leistung von Straßenoberflächen von großer Bedeutung. Die EN 13108-4:2016 berücksichtigt ausschließlich Mischungen, die auf heißem Bitumen basieren, und schließt somit Produkte aus, die auf Bitumenemulsionen oder in-situ-recycelte bituminöse Materialien zurückgreifen. Diese Einschränkung ermöglicht eine fokussierte Anwendung der Norm, wodurch sie als prägnante Richtlinie für die Herstellung von Heißasphalt dient. Die Verknüpfung mit den weiteren Teilen EN 13108-20 und EN 13108-21 bietet eine umfassende Grundlage für die Standardisierung in diesem Bereich und ermöglicht eine ganzheitliche Betrachtung der verwendeten Materialien und Verfahren. Insgesamt stellt die EN 13108-4:2016 einen bedeutenden Schritt in Richtung einheitlicher und qualitativ hochwertiger Produkte im Straßenbau dar, dessen Relevanz in der Praxis nicht zu unterschätzen ist.
표준 EN 13108-4:2016은 아스팔트 혼합물, 특히 뜨거운 롤 아스팔트에 대한 물질 사양을 규정하고 있습니다. 이 표준의 적용 범위는 도로, 공항 및 기타 통행하는 지역에서 사용되는 뜨거운 롤 아스팔트 혼합물에 대한 요구 사항을 포함합니다. 뜨거운 롤 아스팔트는 표면 코스, 바인더 코스, 조정 코스 및 기초에 사용됩니다. 이 표준의 강점 중 하나는 구성 재료 선택에 대한 명확한 요구 사항을 제공한다는 점입니다. 이는 품질 높은 아스팔트 혼합물 생산을 위해 필수적이며, 아스팔트 혼합물의 성능을 극대화하는 데 기여합니다. 또한 이 표준은 EN 13108-20 및 EN 13108-21과 함께 읽혀야 하므로, 다른 관련 표준과의 통합성을 유지하여 전반적인 기술적인 일관성을 보장합니다. 뜨거운 롤 아스팔트 혼합물에 대한 명확한 기준을 제공하는 EN 13108-4:2016은 도로 건설 및 유지보수 분야에서 매우 중요한 문서입니다. 이 표준은 안전하고 지속 가능한 교통 인프라를 위한 신뢰할 수 있는 기초를 마련하고, 업계의 전문성과 품질 보증을 향상시키는 데 큰 기여를 하고 있습니다. 따라서 EN 13108-4:2016은 아스팔트 혼합물 관련 작업에서 반드시 준수해야 할 표준으로 평가됩니다.
The standard EN 13108-4:2016 provides a comprehensive framework for the specification of Hot Rolled Asphalt mixtures used in various high-traffic environments such as roads and airfields. Its primary scope focuses on defining stringent requirements for materials that belong to the Hot Rolled Asphalt mix group, ensuring a high level of quality and performance in paved surfaces. One of the key strengths of EN 13108-4:2016 is its detailed specification regarding the constituent materials required for Hot Rolled Asphalt mixtures. This ensures that only materials meeting precise quality standards are utilized, thereby enhancing the durability and longevity of the pavement. Furthermore, the standard is designed for synergy with related documents, specifically EN 13108-20 and EN 13108-21, providing a holistic approach to bituminous mixtures and ensuring consistency across various applications. The relevance of this standard cannot be overstated, as it plays a crucial role in the construction and maintenance of infrastructures that bear significant vehicular and pedestrian traffic. By establishing clear material specifications, EN 13108-4:2016 helps to promote best practices in the industry, leading to safer and more efficient transportation networks. Overall, EN 13108-4:2016 stands out as a vital document for stakeholders involved in the production and application of Hot Rolled Asphalt, ensuring that the highest standards are met in both material selection and performance for various trafficked areas.
この標準化文書 SITU EN 13108-4:2016 は、ホットロールアスファルトの混合物に関する要求事項を明確に定義しており、道路、空港、その他の交通エリアでの使用に必要な基準を提供しています。この標準は、ホットビチューメンを基にしたホットロールアスファルト混合物の特性について詳細に説明しています。ホットロールアスファルトは、表層、バインダー層、調整層、基層に使用されるため、その重要性は高いと言えます。 この標準の強みは、混合物の構成材料の選定に関する明確な要求事項が含まれている点です。これにより、適切な材料を選び、安全で耐久性のある舗装を実現するための指針となります。また、この標準はEN 13108-20およびEN 13108-21と連携するように設計されており、より広範囲な理解を促進する内容になっています。 ただし、ビチューメンエマルションや現場リサイクリングに基づくビチューメン材料を使用した混合物は対象外であり、ホットロールアスファルトの特定の利用に焦点を当てているため、その利用の範囲が明確に区別されています。この点は、特に特定の環境条件やプロジェクト要件に基づいて材料を選定する際に重要となります。 全体として、EN 13108-4:2016は、ホットロールアスファルトに特化した実用的かつ詳細なガイドラインを提供しており、関連する業界において信頼性の高い基準として評価されています。
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...