iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 10169-1:1996

(Main)

Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)

Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)

This European Standard provides information on the selection and ordering of continuously organic coated (coil coated) steel flat products and specifies appropriate technical requirements for the products, e.g. for test methods and tolerances on coating thickness, appearance and product dimensions and shape.

Kontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl - Teil 1: Allgemeines (Definitionen, Werkstoffe, Grenzabweichungen, Prüfverfahren)

Diese Europäische Norm enthält Angaben über Auswahl und Bestellung kontinuierlich organisch beschichteter (Bandbeschichter) Flacherzeugnisse aus Stahl und legt die angemessenen technischen Anforderungen an die Erzeugnisse fest, z. B. an die Prüfverfahren, an die Grenzabmaße der Schichtdicke, das Aussehen sowie die Maß- und Formtoleranzen für die Erzeugnisse.

Produits plats en acier revêtus en continu de matières organiques (prélaqués) - Partie 1: Généralités (définitions, matériaux, tolérances, méthodes d'essai)

Cette norme européenne fournit des renseignements sur la sélection et la commande de produits plats en acier revêtus en continu de matières organiques ("prélaqués") et spécifie les exigences techniques appropriées relatives aux produits, par exemple les méthodes de contrôle et les tolérances portant sur l'épaisseur du revêtement, l'aspect ainsi que les dimensions et la forme des produits.

Z organskimi materiali kontinuirno prevlečeni (prevlečeni v svitkih) ploščati jekleni izdelki – 1. del: Splošna informacija (definicije, materiali, mejni odstopki mer, metode preskušanja)

General Information

Status
Withdrawn
Publication Date
20-Aug-1996
Withdrawal Date
16-Dec-2003
ICS
25.220.60 - Organic coatings
Technical Committee
ECISS/TC 109 - Coated and uncoated flat products to be used for cold forming
Drafting Committee
ECISS/TC 27/SC 1 - Surface Coated flat products - Continuous coated steels
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
17-Dec-2003
Completion Date
17-Dec-2003
Ref Project
SIST EN 10169-1:1998 - Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)

Relations

Replaced By
EN 10169-1:2003 - Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)
Effective Date
22-Dec-2008

Buy Standard

EN 10169-1:1998EN 10169-1:1998
PreviousNext
Standard
EN 10169-1:1998
English language
33 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Kontinuierlich organisch beschichtete (bandbeschichtete) Flacherzeugnisse aus Stahl - Teil 1: Allgemeines (Definitionen, Werkstoffe, Grenzabweichungen, Prüfverfahren)Produits plats en acier revetus en continu de matieres organiques (prélaqués) - Partie 1: Généralités (définitions, matériaux, tolérances, méthodes d'essai)Continuously organic coated (coil coated) steel flat products - Part 1: General information (definitions, materials, tolerances, test methods)77.140.50SROL]GHONLFlat steel products and semi-products25.220.60Organske prevlekeOrganic coatingsICS:Ta slovenski standard je istoveten z:EN 10169-1:1996SIST EN 10169-1:1998en01-avgust-1998SIST EN 10169-1:1998SLOVENSKI
STANDARD



SIST
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 10169:2022(Main)
Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
SIST EN 10169:2022

This document specifies requirements for continuously organic coated (coil coated) steel flat products. It particularly specifies the performance requirements.
The products covered are wide strip, sheet cut from wide strip, slit wide strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip).
NOTE   National provisions can set up relationships between the performances of the coatings as required in this document and the outdoor atmospheres and ambiances required for a relevant building under study.
This document is not applicable to continuously organic coated flat products made of:
- tin mill products;
- electrical steels.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-14:2023(Main)
Coil coated metals - Test methods - Part 14: Chalking (Helmen method)
SIST EN 13523-14:2023

This document describes the procedure for determining objectively the chalking resulting from natural or artificial weathering of an organic coating on a metallic substrate.
The advantage of this procedure for measuring chalking of an organic coating is that the result can be read off immediately on an instrument. Subjective judgement by visual comparison of test specimens with reference specimens is not necessary.
Reproducible results can only be obtained by careful execution of the test. Special attention is paid to the adhesive tape and its application to the test surface.
The test method is not applicable to embossed coatings. In the case of textured coatings, the degree of texture will influence readings. Also, dirt collection can influence readings on outdoor weathered specimens.
NOTE   Different methods for assessing chalking are in use. The results of these different methods are not comparable.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10169:2022(Main)
Continuously organic coated (coil coated) steel flat products - Technical delivery conditions
SIST EN 10169:2022

This document specifies requirements for continuously organic coated (coil coated) steel flat products. It particularly specifies the performance requirements.
The products covered are wide strip, sheet cut from wide strip, slit wide strip, strip rolled in widths less than 600 mm and cut lengths (from sheet or strip).
NOTE   National provisions can set up relationships between the performances of the coatings as required in this document and the outdoor atmospheres and ambiances required for a relevant building under study.
This document is not applicable to continuously organic coated flat products made of:
- tin mill products;
- electrical steels.

  • Standard
    41 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    40 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-25:2022(Main)
Coil coated metals - Test methods - Part 25: Resistance to humidity
SIST EN 13523-25:2022

This document specifies a procedure for evaluating the resistance to humidity of an organic coating on a metallic substrate, by means of exposure in a humidity cabinet under controlled conditions.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-26:2022(Main)
Coil coated metals - Test methods - Part 26: Resistance to condensation of water
SIST EN 13523-26:2022

This document specifies a procedure for evaluating the resistance to continuous condensation of an organic coating on a metallic substrate, by means of exposure in a humidity cabinet under controlled conditions.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-9:2022(Main)
Coil coated metals - Test methods - Part 9: Resistance to water immersion
SIST EN 13523-9:2022

This document specifies the procedure for determining the resistance to water immersion of an organic coating on a metallic substrate.
The test is applicable to all kinds of organic coatings, including metallics and embossed, textured, pearlescent and printed coatings. The results of the test give an indication of the resistance of the coil coated metal to water.
The method is not intended to reproduce any particular condition of condensation.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-0:2021(Main)
Coil coated metals - Test methods - Part 0: General introduction
SIST EN 13523-0:2021

This document specifies the overall scope of all parts of EN 13523, gives definitions common to all parts and describes how sampling and preparation of test panels for most of the individual test methods are to be carried out.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-2:2021(Main)
Coil coated metals - Test methods - Part 2: Gloss
SIST EN 13523-2:2021

This document specifies the procedure for determining the gloss of an organic coating on a metallic substrate. Gloss is a characteristic of fundamental importance to the appearance of the coil coated product.
The apparatus requires a flat specimen of size greater than the aperture, thus, uneven surfaces cannot be measured.
This method is applicable to all pigmented and unpigmented coatings including metallic/pearlescent coatings. However, for textured coatings it is only indicative.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-7:2021(Main)
Coil coated metals - Test methods - Part 7: Resistance to cracking on bending (T-bend test)
SIST EN 13523-7:2021

This document specifies the procedure for determining the resistance to cracking of an organic coating on a metallic substrate when bent through 135° to 180°. The degree of adhesion can also be evaluated.
Both folding and mandrel methods are considered. The folding method is more often used for practical purposes but where more precise determinations are required, the mandrel method is the preferred method.
The cylindrical bend method can also be used for a pass/fail decision by using an agreed mandrel.
The choice of the appropriate test method is limited by the thickness and/or the hardness of the substrate.
The feasibility of the test depends on the type and thickness of the substrate. During the procedure, the mandrel is not intended to deform.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13523-3:2021(Main)
Coil coated metals - Test methods - Part 3: Colour difference and metamerism - Instrumental comparison
SIST EN 13523-3:2021

This document specifies procedures for determining the instrumental colour difference (CIELAB) of an organic coating on a metallic substrate compared to another one used as a reference (usually called reference) and the metamerism depending on the illuminant.
When two colour specimens have identical spectral reflectance curves, they are matching under any illuminant irrespective of its spectral characteristics. This is termed a “spectral match”. It is also possible for two colour specimens having different spectral reflectance curves to match visually under a given light source but not to match under another light source with different spectral characteristics; such matches are termed “metameric”.
One quantitative description of metamerism is the so-called “metamerism index”.
Information on the metamerism index is of limited value where ΔE (instrumental colour difference for a given illuminant) is > 0,5. The metamerism index is not suited for determining the absolute colour difference or colour consistency of a given specimen at change of illuminant.
The colour difference under the reference illuminant is to be measured in colour coordinates L*, a* and b*.
Excluded from this method are organic coatings producing fluorescence and/or which are multicoloured, pearlescent or metallic.
Establishing a reference as well as the magnitude of an acceptable colour difference are not covered by this method.
Two methods are given in this document:
a)   instrumental colour difference measurement using a tristimulus colourimeter;
b)   instrumental colour difference measurement using a spectrophotometer or equivalent.
It is advised that care is taken when measuring e.g.
—   textured surfaces;
—   fluorescent coatings;
—   metameric coatings;
—   multi-coloured, pearlescent, metallic or special colour effect coatings.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day