EN 15219:2006
(Main)Water equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing
Water equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing
This European Standard specifies requirements relating to the construction and mode of operation and relevant methods for testing automatic, salt-regenerated, anion exchange nitrate removal devices for drinking water installations inside buildings, which are permanently connected to the mains supply.
NOTE Products intended for use in water supply systems are to comply, when existing, with national regulations and testing arrangements that ensure fitness for contact with drinking water. The Member State’s relevant regulators and the EC Commission agreed on the principle for a future unique European Acceptance Scheme (EAS) which would provide a common testing and approval arrangement at European level.
If and when the EAS is adopted, European Standards on products will be amended by the addition of an Annex Z/EAS under Mandate M/136, which will contain formal references to the testing, certification and product marking requirements of the EAS. Until the EAS comes into force, the current national regulations remain applicable.
Anlagen zur Behandlung von Trinkwasser innerhalb von Gebäuden - Nitratentfernungsgeräte - Anforderungen an Ausführung, Sicherheit und Prüfung
Diese Europäische Norm legt Anforderungen hinsichtlich der Konstruktion und der Betriebsart sowie entsprechende Prüfverfahren an automatische, mit Salz regenerierte und nach dem Prinzip des Anionenaustausches wirkende Nitratentfernungsgeräte für Trinkwasser-Installationen in Gebäuden, die dauerhaft an die Wasserversorgung angeschlossen sind, fest.
ANMERKUNG Produkte für die Verwendung in Wasserversorgungssystemen müssen, soweit vorhanden, die nationalen Bestimmungen und Prüfanordnungen erfüllen, die ihre Eignung für den Kontakt mit Trinkwasser bestätigen. Die für die Mitgliedstaaten zuständigen Behörden und die EU-Kommission haben sich auf die Prinzipien eines zukünftigen einheitlichen Europäischen Zulassungssystems (EAS) geeinigt, welches eine gemeinsame Prüf- und Zulassungsregelung auf europäischer Basis bietet.
Falls und sobald EAS eingeführt ist, werden die Europäischen Produktnormen um einen Anhang Z/EAS unter dem Mandat M/136 ergänzt, in welchem formale Verweise auf die Anforderungen für die Prüfung, die Zertifizierung und die Produktkennzeichnung im Rahmen des EAS gegeben werden. Bis das EAS in Kraft gesetzt ist, bleiben die derzeitigen nationalen Vorschriften anwendbar.
Appareil de traitement d'eau à l'intérieur des bâtiments - Dénitratation - Spécifications de performances, de sécurité et d'essais
La présente Norme européenne spécifie les exigences relatives à la construction et au mode de fonctionnement des dispositifs de dénitratation automatiques, régénérés par le sel, échangeurs d'anions, utilisés dans les installations d'alimentation en eau potable à l'intérieur des bâtiments et raccordés en permanence à l'alimentation principale ; elle décrit également les méthodes d'essai correspondantes.
Jusqu'à l'entrée en vigueur de l'EAS, les réglementations nationales actuelles restent en vigueur.
NOTE Les produits destinés à être utilisés dans les systèmes d'alimentation en eau doivent respecter, le cas échéant, les réglementations nationales et les dispositifs d'essai assurant leur adéquation pour être mis en contact avec de l'eau potable. Les organismes de réglementation des Etats membres correspondants et la Commission CE se sont mis d'accord sur le principe d'un Système européen d'acceptation unique (EAS), prévoyant des méthodes d'essai communes et une approbation à l'échelle européenne.
Si l'EAS est adopté ou quand il le sera, les Normes européennes relatives aux produits seront amendées par l'ajout d'une Annexe Z/EAS dans le cadre d'un Mandat M/136, comprenant des références formelles aux essais, à la certification et aux exigences de marquage des produits de l'EAS.
Oprema za pitno vodo v stavbah - Naprave za odstranjevanje nitratov - Zahteve za delovanje, varnost in preskusne metode
General Information
- Status
- Withdrawn
- Publication Date
- 05-Dec-2006
- Withdrawal Date
- 27-Nov-2007
- Technical Committee
- CEN/TC 164 - Water supply
- Drafting Committee
- CEN/TC 164/WG 13 - Water conditioning equipment inside buildings
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 28-Nov-2007
- Completion Date
- 28-Nov-2007
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 18-Jan-2023
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
EN 15219:2006 is a standard published by the European Committee for Standardization (CEN). Its full title is "Water equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing". This standard covers: This European Standard specifies requirements relating to the construction and mode of operation and relevant methods for testing automatic, salt-regenerated, anion exchange nitrate removal devices for drinking water installations inside buildings, which are permanently connected to the mains supply. NOTE Products intended for use in water supply systems are to comply, when existing, with national regulations and testing arrangements that ensure fitness for contact with drinking water. The Member State’s relevant regulators and the EC Commission agreed on the principle for a future unique European Acceptance Scheme (EAS) which would provide a common testing and approval arrangement at European level. If and when the EAS is adopted, European Standards on products will be amended by the addition of an Annex Z/EAS under Mandate M/136, which will contain formal references to the testing, certification and product marking requirements of the EAS. Until the EAS comes into force, the current national regulations remain applicable.
This European Standard specifies requirements relating to the construction and mode of operation and relevant methods for testing automatic, salt-regenerated, anion exchange nitrate removal devices for drinking water installations inside buildings, which are permanently connected to the mains supply. NOTE Products intended for use in water supply systems are to comply, when existing, with national regulations and testing arrangements that ensure fitness for contact with drinking water. The Member State’s relevant regulators and the EC Commission agreed on the principle for a future unique European Acceptance Scheme (EAS) which would provide a common testing and approval arrangement at European level. If and when the EAS is adopted, European Standards on products will be amended by the addition of an Annex Z/EAS under Mandate M/136, which will contain formal references to the testing, certification and product marking requirements of the EAS. Until the EAS comes into force, the current national regulations remain applicable.
EN 15219:2006 is classified under the following ICS (International Classification for Standards) categories: 91.140.60 - Water supply systems. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 15219:2006 has the following relationships with other standards: It is inter standard links to EN 15219:2006+A1:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 15219:2006 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 15219:2006 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Oprema za pitno vodo v stavbah - Naprave za odstranjevanje nitratov - Zahteve za delovanje, varnost in preskusne metodeAnlagen zur Behandlung von Trinkwasser innerhalb von Gebäuden - Nitratentfernungsgeräte - Anforderungen an Ausführung, Sicherheit und PrüfungAppareil de traitement d'eau a l'intérieur des bâtiments - Dénitratation - Spécifications de performances, de sécurité et d'essaisWater equipment inside buildings - Nitrate removal devices - Requirements for performance, safety and testing91.140.60Sistemi za oskrbo z vodoWater supply systems13.060.20Pitna vodaDrinking waterICS:Ta slovenski standard je istoveten z:EN 15219:2006SIST EN 15219:2007en,fr,de01-oktober-2007SIST EN 15219:2007SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15219December 2006ICS 91.140.60 English VersionWater equipment inside buildings - Nitrate removal devices -Requirements for performance, safety and testingAppareil de traitement d'eau à l'intérieur des bâtiments -Dénitratation - Spécifications de performances, de sécuritéet d'essaisAnlagen zur Behandlung von Trinkwasser innerhalb vonGebäuden - Nitratentfernungsgeräte - Anforderungen anAusführung, Sicherheit und PrüfungThis European Standard was approved by CEN on 4 November 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15219:2006: ESIST EN 15219:2007
Principles of nitrate reduction using anionic exchange resins.18 A.1 Nitrate effects.18 A.2 Nitrate removal with anionic resins.18 A.3 Selective and non-selective resins.18 A.4 Softening and nitrate removal with mixed beds.19 Bibliography.20
cycles per minute between 150 kPa and 1,3 times the maximum design pressure as defined in 7.4.2. 4.3.3 Minimum and maximum operating pressure When tested in accordance with 7.1.3 d), the nitrate removal device shall operate and regenerate to the requirements of this European Standard with a minimum water supply pressure of 200 kPa and a maximum pressure not less than 60 % of the maximum design pressure. SIST EN 15219:2007
1,5 mmol/l over that of the inlet water. 4.3.9 Noise level The nitrate removal unit shall conform to noise levels defined and measured in accordance with EN ISO 3822-1 and EN ISO 3822-3 for both the service and regeneration runs. 4.3.10 Air vent The design shall ensure that any trapped air shall be released in normal operating conditions (see 7.4.5). 4.3.11 End connections The fittings used to assemble the device and to connect it to existing pipework shall conform to the requirements of ISO 7-1 and EN ISO 228-1. 4.3.12 Drain connections The regeneration drain shall be independent from the salt tank overflow. 4.4 Operating specifications 4.4.1 Initiation of regeneration Regeneration shall be initiated automatically (see 7.5.3.2 a)). Each nitrate removal unit shall also be equipped with a provision for manual initiation of regeneration (see 7.5.3.1). SIST EN 15219:2007
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...