EN ISO 8130-12:2019
(Main)Coating powders - Part 12: Determination of compatibility (ISO 8130-12:2019)
Coating powders - Part 12: Determination of compatibility (ISO 8130-12:2019)
This document specifies a visual method to determine the deterioration of surface quality of the final coating when mixing two different coating powders. The surface quality will depend on the following characteristics of the coating powders:
a) the chemical reactivity;
b) the chemical composition;
c) the melt properties.
The onset of the incompatibility in appearance, its nature and its extent will depend greatly on the ratio in which the powders are mixed. The nature of the incompatibility in surface appearance can manifest itself in various ways, described in Clause 8.
This test is useful in predicting the possibility of incompatibility arising from mixing different powders both during the manufacturing process and during the application of the coating powder.
This document concerns only changes in visual aspects of the coating. The mixture series can also be used for testing properties such as mechanical properties, chemical properties, corrosive properties and resistance against UV radiation. Further properties can be agreed between interested parties.
Pulverlacke - Teil 12: Bestimmung der Mischbarkeit (ISO 8130-12:2019)
Dieses Dokument legt ein Verfahren fest, mit dem bestimmt werden kann, ob das Mischen zweier unter-schiedlicher Pulverlacke zu einer Verschlechterung der Oberflächenqualität der sich ergebenden Beschich-tung führt. Die Oberflächenqualität hängt von folgenden Eigenschaften der Pulverlacke ab:
a) der chemischen Reaktivität;
b) der chemischen Zusammensetzung;
c) der Schmelzeigenschaften.
Der Beginn einer Verschlechterung des Aussehens, deren Art und deren Ausmaß hängen stark vom Mi-schungsverhältnis der Pulver ab. Die Art der Verschlechterung des Aussehens der Oberfläche kann sich in unterschiedlicher Weise zeigen, wie in Abschnitt 8 beschrieben.
Diese Prüfung ist nützlich zur Voraussage möglicher Unverträglichkeit als Folge von Mischen unter-schiedlicher Pulver, sowohl während der Herstellung als auch während der Anwendung von Pulverlacken.
Dieses Dokument betrifft nur Änderungen des Aussehens. Die Mischungsreihen können auch angewendet werden, um Eigenschaften wie z. B. mechanische Eigenschaften, chemische Eigenschaften, korrosive Eigen-schaften, UV Beständigkeit, zu prüfen. Weitere Prüfungen können zwischen den Vertragspartnern verein-bart werden.
Poudres pour revêtement - Partie 12: Détermination de la compatibilité (ISO 8130-12:2019)
Le présent document spécifie une méthode visuelle pour déterminer la détérioration de la qualité de surface du revêtement final lorsque l'on mélange deux poudres pour revêtement différentes. La qualité de surface dépend des caractéristiques suivantes des poudres pour revêtement:
a) la réactivité chimique ;
b) la composition chimique ;
c) les propriétés de fusion.
La survenue, la nature et l'étendue de l'incompatibilité sur l'apparence de surface dépendent largement du rapport selon lequel les poudres sont mélangées. La nature de l'incompatibilité sur l'apparence de surface peut se manifester de diverses manières, décrites à l'Article 8.
Le présent essai s'avère utile pour prédire une éventuelle incompatibilité due au mélange de différentes poudres, que ce soit au cours du processus de fabrication ou lors de l'application de la poudre pour revêtement.
Le présent document ne concerne que les modifications d'aspect visuel des revêtements. La série de mélanges peut également être utilisée pour soumettre à essai des propriétés mécaniques, chimiques, corrosives et de résistance aux rayonnements UV. D'autres propriétés peuvent être convenues entre les parties intéressées.
Praškasti premazi - 12. del: Ugotavljanje združljivosti (ISO 8130-12:2019)
Ta dokument določa vizualno metodo za ugotavljanje poslabšanja kakovosti površine končnega premaza, kadar sta zmešana dva različna praškasta premaza. Kakovost površine je odvisna od naslednjih značilnosti praškastih premazov:
a) kemična reaktivnost,
b) kemična sestava,
c) lastnosti taljenja.
Pojav nezdružljivosti v videzu, naravi in obsegu je močno odvisna od razmerja mešanja praškov. Narava nezdružljivosti v videzu površine se lahko odraža na različne načine, ki so opisani v 8. točki.
Ta preskus je uporaben pri napovedovanju verjetnosti nezdružljivosti zaradi mešanja različnih praškov med proizvodnim procesom in nanašanjem praškastega premaza.
Ta dokument se nanaša le na vizualne spremembe premaza. Serije mešanic je mogoče uporabljati tudi za preskušanje lastnosti, kot so mehanske lastnosti, kemične lastnosti, korozivne lastnosti in odpornost na ultravijolično sevanje. Zainteresirane strani se lahko dogovorijo o dodatnih lastnostih.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2019
Nadomešča:
SIST EN ISO 8130-12:2012
SIST ISO 8130-12:1998
Praškasti premazi - 12. del: Ugotavljanje združljivosti (ISO 8130-12:2019)
Coating powders - Part 12: Determination of compatibility (ISO 8130-12:2019)
Pulverlacke - Teil 12: Bestimmung der Mischbarkeit (ISO 8130-12:2019)
Poudres pour revêtement - Partie 12: Détermination de la compatibilité (ISO 8130-
12:2019)
Ta slovenski standard je istoveten z: EN ISO 8130-12:2019
ICS:
87.040 Barve in laki Paints and varnishes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 8130-12
EUROPEAN STANDARD
NORME EUROPÉENNE
May 2019
EUROPÄISCHE NORM
ICS 87.040 Supersedes EN ISO 8130-12:2010
English Version
Coating powders - Part 12: Determination of compatibility
(ISO 8130-12:2019)
Poudres pour revêtement - Partie 12: Détermination Pulverlacke - Teil 12: Bestimmung der Mischbarkeit
de la compatibilité (ISO 8130-12:2019) (ISO 8130-12:2019)
This European Standard was approved by CEN on 8 March 2019.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8130-12:2019 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 8130-12:2019) has been prepared by Technical Committee ISO/TC 35 "Paints
and varnishes" in collaboration with Technical Committee CEN/TC 139 “Paints and varnishes” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by November 2019, and conflicting national standards
shall be withdrawn at the latest by November 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8130-12:2010.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8130-12:2019 has been approved by CEN as EN ISO 8130-12:2019 without any
modification.
INTERNATIONAL ISO
STANDARD 8130-12
Second edition
2019-04
Coating powders —
Part 12:
Determination of compatibility
Poudres pour revêtement —
Partie 12: Détermination de la compatibilité
Reference number
ISO 8130-12:2019(E)
©
ISO 2019
ISO 8130-12:2019(E)
© ISO 2019
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2019 – All rights reserved
ISO 8130-12:2019(E)
Contents Page
Foreword .iv
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Apparatus . 2
6 Sampling . 2
7 Procedure. 2
8 Expression of results . 3
9 Precision . 3
10 Test report . 3
Annex A (informative) Test data for compatibility . 5
Bibliography . 7
ISO 8130-12:2019(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.