EN 13172:2008
(Main)Thermal insulating products - Evaluation of conformity
Thermal insulating products - Evaluation of conformity
This European Standard specifies the procedures and the criteria for the evaluation of the conformity of a thermal insulating product with the relevant European product specification.
Wärmedämmstoffe - Konformitätsbewertung
Diese Europäische Norm legt die Verfahren und die Anforderungen für die Bewertung der Konformität eines
Wärmedämmstoffes mit der entsprechenden europäischen Produktnorm fest.
Produits isolant thermiques - Evaluation de la conformité
La présente Norme européenne spécifie les procédures et les critères pour l’évaluation de la conformité d’un
produit isolant thermique avec les spécifications européennes du produit correspondant.
Toplotnoizolacijski proizvodi - Ugotavljanje skladnosti
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 13172:2008
01-september-2008
1DGRPHãþD
SIST EN 13172:2002
SIST EN 13172:2002/A1:2005
Toplotnoizolacijski proizvodi - Ugotavljanje skladnosti
Thermal insulating products - Evaluation of conformity
Wärmedämmstoffe - Konformitätsbewertung
Produits isolant thermiques - Evaluation de la conformité
Ta slovenski standard je istoveten z: EN 13172:2008
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
SIST EN 13172:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN 13172:2008
---------------------- Page: 2 ----------------------
SIST EN 13172:2008
EUROPEAN STANDARD
EN 13172
NORME EUROPÉENNE
EUROPÄISCHE NORM
May 2008
ICS 91.100.60 Supersedes EN 13172:2001
English Version
Thermal insulating products - Evaluation of conformity
Produits isolant thermiques - Evaluation de la conformité Wärmedämmstoffe - Konformitätsbewertung
This European Standard was approved by CEN on 12 April 2008.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2008 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13172:2008: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13172:2008
EN 13172:2008 (E)
Contents Page
Foreword.4
1 Scope.5
2 Normative references.5
3 Terms and definitions .5
4 General requirements.5
5 Requirements for factory production control - Tasks for the manufacturer.6
5.1 General.6
5.2 Organisation.7
5.2.1 General.7
5.2.2 Responsibility and authority .7
5.2.3 Management representative for factory production control .7
5.2.4 Management review.7
5.3 Quality manual .7
5.4 Inspection and testing.7
5.4.1 General.7
5.4.2 Test equipment .8
5.4.3 Inspection and testing of raw materials and o
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.