EN 1529:1999
(Main)Doors leaves - Height, width, thickness and squareness - Tolerance classes
Doors leaves - Height, width, thickness and squareness - Tolerance classes
This standard gives the tolerances limits for specified dimensions of height, width and thickness, and for squareness of door leaves. It applies to door leaves which are supplied without, and independent of, any frames. It does not apply to the leaves of doorsets. NOTE: Compliance with the tolerance limits given in this standard does not imply that this would necessarily produce a perfect fit between door leaves and frames.
Türblätter - Höhe, Breite, Dicke und Rechtwinkligkeit - Toleranzklassen
Diese Norm legt die Toleranzgrenzen zu den vereinbarten Abmessungen von Höhe, Breite und Dicke sowie zur Rechtwinkligkeit von Türblättern fest. Die Norm gilt für Türblätter, die ohne bzw. unabhängig von den Zargen geliefert werden. Diese Norm gilt nicht für Türblätter von Türelementen. ANMERKUNG: Selbst wenn die Toleranzgrenzen dieser Norm eingehalten werden, bedeutet dies nicht, daß daraus notwendigerweise eine einwandfreie Passung zwischen Türblättern und Zargen resultiert.
Vantaux de portes - Hauteur, largeur, épaisseur et équerrage - Classes de tolérances
La présente norme donne les limites de tolérances des valeurs spécifiées de hauteur, largeur et épaisseur des vantaux de portes ainsi que de leur équerrage. Elle s'applique aux vantaux livrés sans huisseries et indépendamment de ces dernières. Elle ne s'applique pas aux vantaux des blocs portes. NOTE: La conformité aux limites de tolérances données dans la présente norme n'implique pas nécessairement un ajustement parfait entre vantaux et huisseries.
Vratna krila -- Višina, širina, debelina in pravokotnost - Tolerančni razredi
General Information
- Status
- Withdrawn
- Publication Date
- 16-Nov-1999
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 33 - Doors, windows, shutters and building hardware
- Drafting Committee
- CEN/TC 33/WG 2 - Windows
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 08-Dec-2021
- Completion Date
- 28-Jan-2026
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 08-Jun-2022
- Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
EN 1529:1999 is a standard published by the European Committee for Standardization (CEN). Its full title is "Doors leaves - Height, width, thickness and squareness - Tolerance classes". This standard covers: This standard gives the tolerances limits for specified dimensions of height, width and thickness, and for squareness of door leaves. It applies to door leaves which are supplied without, and independent of, any frames. It does not apply to the leaves of doorsets. NOTE: Compliance with the tolerance limits given in this standard does not imply that this would necessarily produce a perfect fit between door leaves and frames.
This standard gives the tolerances limits for specified dimensions of height, width and thickness, and for squareness of door leaves. It applies to door leaves which are supplied without, and independent of, any frames. It does not apply to the leaves of doorsets. NOTE: Compliance with the tolerance limits given in this standard does not imply that this would necessarily produce a perfect fit between door leaves and frames.
EN 1529:1999 is classified under the following ICS (International Classification for Standards) categories: 91.060.50 - Doors and windows. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1529:1999 has the following relationships with other standards: It is inter standard links to EN 1529:2021, EN 951:1998. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1529:1999 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1529:1999 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Türblätter - Höhe, Breite, Dicke und Rechtwinkligkeit - ToleranzklassenVantaux de portes - Hauteur, largeur, épaisseur et équerrage - Classes de tolérancesDoors leaves - Height, wid
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...