EN 12764:2015/prA1:2017
(Amendment)Sanitary appliances - Specification for whirlpool baths
Sanitary appliances - Specification for whirlpool baths
This European Standard specifies requirements for whirlpool baths, having a rated voltage of not more than 250 V for single phase appliances and 480 V for other appliances, which are intended to be installed in indoor domestic situations and used in accordance with the manufacturer’s instructions for personal hygiene. Such whirlpool baths are tested and supplied as a complete independent unit designed to be drained down after every use. They may be transported in several separate parts, for assembly on site, to facilitate delivery.
Safety aspects of Whirlpool baths (except use by young children and slow moving/weak elderly or disabled individuals) are covered by EN 60335 2 60.
Exclusions: this standard does not cover additional requirements for whirlpool baths intended for uses where specific medical provisions are required, or whirlpool baths for communal uses where they are not drained down after every use. Portable whirlpool devices are not covered by this standard.
For the purposes of this standard the term ‘domestic situations’ includes use in hotels, accommodation for students, hospitals and similar buildings.
Warning: Slow moving elderly or disabled persons should take care when using whirlpool baths. Young children should not be allowed to use whirlpool baths without supervision.
NOTE 1 It is unrealistic to expect manufacturers to provide a definition of what constitutes a ‘slow moving elderly or disabled person’, or ‘young children’. The former is the responsibility of the individual or a carer. The latter is a parental responsibility.
NOTE 2 When EN 60335–2-60 is amended to cover use of whirlpool baths by slow moving elderly or disabled persons and young children the warning given above will be deleted from this standard.
Sanitärausstattungsgegenstände - Anforderungen an Whirlwannen
Appareils sanitaires - Spécification relative aux baignoires avec système de brassage d'eau
Sanitarna oprema - Zahteve za masažne kadi - Dopolnilo A1
General Information
- Status
- Not Published
- Technical Committee
- CEN/TC 163 - Sanitary appliances
- Drafting Committee
- CEN/TC 163/WG 4 - Baths (W/Pools) - Shower trays (Performance testing)
- Current Stage
- 4097 - End of interruption of work - split/merged
- Start Date
- 26-Apr-2018
- Completion Date
- 14-Apr-2025
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 12-Oct-2016
Overview
EN 12764:2015/prA1:2017 is a European Standard developed by CEN that specifies the requirements for whirlpool baths designed for personal hygiene. It applies to whirlpool baths intended for indoor domestic installation, including settings such as private homes, hotels, student accommodations, and hospitals. The standard focuses on whirlpool baths operating at a rated voltage of up to 250 V for single-phase or 480 V for other appliances, which are supplied as complete units drained after each use. It excludes portable whirlpool devices and baths used for communal or special medical applications.
This standard ensures that whirlpool baths meet essential safety, performance, and durability criteria, supporting safe installation and operation according to manufacturers’ instructions. It also aligns with the EU Construction Products Regulation to facilitate CE marking and product conformity demonstration.
Key Topics
Scope and Application
- Applies to domestic-use whirlpool baths intended for personal hygiene.
- Covers products with rated voltage up to 250 V (single phase) or 480 V (other appliances).
- Includes baths delivered in parts for on-site assembly.
- Excludes portable whirlpool devices and communal or medical-use whirlpool baths.
Safety Considerations
- Safety aspects (except use by young children and slow-moving elderly or disabled persons) covered by EN 60335-2-60.
- Important warnings highlighted for vulnerable users, advising supervision for young children and caution for elderly or disabled individuals.
Marking and Product Designation
- Whirlpool baths must indicate intended use for personal hygiene (abbreviated as “PH” for CE marking).
- Designation codes summarize compliance with essential characteristics, providing clarity for manufacturers and regulators.
Testing and Compliance
- Type testing and sample testing procedures ensure adherence to standards.
- Compliance criteria include safety against hair entrapment, cleanability, durability, and other critical characteristics.
- Samples tested according to defined methods to verify conformity.
Harmonization with EU Regulations
- Supports the EU Construction Products Regulation (Regulation EU No. 305/2011).
- Provides the framework for issuing Declaration of Performance (DoP) and CE marking.
- Defines Assessment and Verification of Constancy of Performance (AVCP) system 4 for manufacturer responsibilities.
Applications
EN 12764:2015/prA1:2017 has wide practical applications in the design, manufacture, installation, and regulatory approval of whirlpool baths for:
- Residential homes for personal hygiene purposes.
- Hotels and guest accommodations, ensuring safe and standardized guest amenities.
- Student housing facilities, providing sanitary appliances compliant with European safety and performance norms.
- Hospitals and healthcare buildings, excluding specific medical whirlpool installations but covering general hygiene use.
- Quality assurance testing laboratories validating product conformity.
- Regulatory bodies monitoring compliance with EU directives and regulations.
Manufacturers can use this standard to ensure their whirlpool baths meet recognized safety and performance criteria, supporting market access across European countries through CE marking.
Related Standards
- EN 60335-2-60: Safety requirements for electrical appliances for household and similar purposes – specifically covering whirlpool baths’ electrical safety except for vulnerable user groups.
- Regulation (EU) No 305/2011: Construction Products Regulation (CPR), covering assessment and verification for construction-related products including sanitary appliances.
- Other European standards developed by CEN/TC 163, focusing on sanitary appliances and installation requirements.
Practical Value
Compliance with EN 12764:2015/prA1:2017 ensures that whirlpool baths:
- Are safe for indoor domestic use, reducing risks such as hair entrapment or electrical hazards.
- Are designed for easy cleaning and durable performance.
- Support manufacturers in meeting regulatory requirements and achieving CE marking.
- Provide end-users with confidence in product safety and functionality.
- Facilitate consistent product quality and harmonized market rules across Europe.
By adhering to this standard, stakeholders contribute to enhanced consumer protection, streamlined product certification, and improved safety in sanitary appliances involving whirlpool baths.
Keywords: EN 12764:2015, whirlpool baths standard, European Standard CEN, sanitary appliances, personal hygiene baths, whirlpool bath safety, CE marking, EU Construction Products Regulation, AVCP system, whirlpool bath testing, domestic whirlpool baths.
Frequently Asked Questions
EN 12764:2015/prA1:2017 is a draft published by the European Committee for Standardization (CEN). Its full title is "Sanitary appliances - Specification for whirlpool baths". This standard covers: This European Standard specifies requirements for whirlpool baths, having a rated voltage of not more than 250 V for single phase appliances and 480 V for other appliances, which are intended to be installed in indoor domestic situations and used in accordance with the manufacturer’s instructions for personal hygiene. Such whirlpool baths are tested and supplied as a complete independent unit designed to be drained down after every use. They may be transported in several separate parts, for assembly on site, to facilitate delivery. Safety aspects of Whirlpool baths (except use by young children and slow moving/weak elderly or disabled individuals) are covered by EN 60335 2 60. Exclusions: this standard does not cover additional requirements for whirlpool baths intended for uses where specific medical provisions are required, or whirlpool baths for communal uses where they are not drained down after every use. Portable whirlpool devices are not covered by this standard. For the purposes of this standard the term ‘domestic situations’ includes use in hotels, accommodation for students, hospitals and similar buildings. Warning: Slow moving elderly or disabled persons should take care when using whirlpool baths. Young children should not be allowed to use whirlpool baths without supervision. NOTE 1 It is unrealistic to expect manufacturers to provide a definition of what constitutes a ‘slow moving elderly or disabled person’, or ‘young children’. The former is the responsibility of the individual or a carer. The latter is a parental responsibility. NOTE 2 When EN 60335–2-60 is amended to cover use of whirlpool baths by slow moving elderly or disabled persons and young children the warning given above will be deleted from this standard.
This European Standard specifies requirements for whirlpool baths, having a rated voltage of not more than 250 V for single phase appliances and 480 V for other appliances, which are intended to be installed in indoor domestic situations and used in accordance with the manufacturer’s instructions for personal hygiene. Such whirlpool baths are tested and supplied as a complete independent unit designed to be drained down after every use. They may be transported in several separate parts, for assembly on site, to facilitate delivery. Safety aspects of Whirlpool baths (except use by young children and slow moving/weak elderly or disabled individuals) are covered by EN 60335 2 60. Exclusions: this standard does not cover additional requirements for whirlpool baths intended for uses where specific medical provisions are required, or whirlpool baths for communal uses where they are not drained down after every use. Portable whirlpool devices are not covered by this standard. For the purposes of this standard the term ‘domestic situations’ includes use in hotels, accommodation for students, hospitals and similar buildings. Warning: Slow moving elderly or disabled persons should take care when using whirlpool baths. Young children should not be allowed to use whirlpool baths without supervision. NOTE 1 It is unrealistic to expect manufacturers to provide a definition of what constitutes a ‘slow moving elderly or disabled person’, or ‘young children’. The former is the responsibility of the individual or a carer. The latter is a parental responsibility. NOTE 2 When EN 60335–2-60 is amended to cover use of whirlpool baths by slow moving elderly or disabled persons and young children the warning given above will be deleted from this standard.
EN 12764:2015/prA1:2017 is classified under the following ICS (International Classification for Standards) categories: 91.140.70 - Sanitary installations. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 12764:2015/prA1:2017 has the following relationships with other standards: It is inter standard links to EN 12764:2015+A1:2018, EN 12764:2015. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 12764:2015/prA1:2017 is associated with the following European legislation: EU Directives/Regulations: 305/2011; Standardization Mandates: M/110. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
You can purchase EN 12764:2015/prA1:2017 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Standards Content (Sample)
SLOVENSKI STANDARD
01-november-2017
Sanitarna oprema - Zahteve za masažne kadi - Dopolnilo A1
Sanitary appliances - Specification for whirlpool baths
Sanitärausstattungsgegenstände - Anforderungen an Whirlwannen
Appareils sanitaires - Spécification relative aux baignoires avec système de brassage
d'eau
Ta slovenski standard je istoveten z: EN 12764:2015/prA1:2017
ICS:
91.140.70 Sanitarne naprave Sanitary installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
EN 12764:2015
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
September 2017
ICS 91.140.70
English Version
Sanitary appliances - Specification for whirlpool baths
Appareils sanitaires - Spécification relative aux Sanitärausstattungsgegenstände - Anforderungen an
baignoires avec système de brassage d'eau Whirlwannen
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 163.
This draft amendment A1, if approved, will modify the European Standard EN 12764:2015. If this draft becomes an amendment,
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12764:2015/prA1:2017:2017 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
1 Modifications to sub-clause 7.1, Marking and product designation . 4
2 Modification to sub-clause 8.1, General . 4
3 Modification to sub-clause 8.2.1, General . 4
4 Modifications to sub clause 8.2.2, Samples, testing and compliance criteria . 4
5 Modification to Annex ZA . 4
Annex ZA (informative) Relationship of this European Standard with Regulation
No.305/2011 (When applying this standard as a harmonized standard under
Regulation (EU) No. 305/2011, manufacturers and Member States are obliged by
this regulation to use this Annex) . 5
ZA.1 Scope and relevant characteristics . 5
ZA.2 System of Assessment and Verification of Constancy of Performance (AVCP) . 5
ZA.3 Assignment of AVCP tasks . 5
European foreword
This document (EN 12764:2015/prA1:2017) has been prepared by Technical Committee CEN/TC 163
“Sanitary appliances”, the secretariat of which is held by UNI.
This document is currently submitted to the CEN Enquiry.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of the EU Construction Products
Regulation.
For relationship with EU Construction Products Regulation, see in
...










Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...