EN 15651-2:2010

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tesnilne mase za nekonstrukcijske stike v stavbah in na sprehajalnih površinah - 2. del: Tesnilne mase za zasteklitevFugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 2: Fugendichtstoffe für VerglasungenMastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 2 : Mastics pour vitrageSealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing91.100.50Veziva. Tesnilni materialiBinders. Sealing materialsICS:Ta slovenski standard je istoveten z:EN 15651-2:2010SIST EN 15651-2:2010en,de01-maj-2010SIST EN 15651-2:2010SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 15651-2
March 2010 ICS 91.100.50 English Version
Sealants for non-structural use in joints in buildings and pedestrian walkways - Part 2: Sealants for glazing
Mastics pour joints dans la construction immobilière - Définitions, exigences et évaluation de la conformité - Partie 2 : Mastics pour vitrage
Fugendichtstoffe für nicht tragende Anwendungen in Gebäuden und Fußgängerwegen - Teil 2: Fugendichtstoffe für Verglasungen This European Standard was approved by CEN on 29 January 2010.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 15651-2:2010: ESIST EN 15651-2:2010

Example on the frequency of tests for factory production control . 12Bibliography . 13 SIST EN 15651-2:2010

(ISO 7389:2002) EN ISO 7390, Building construction — Jointing products — Determination of resistance to flow of sealants (ISO 7390:2003) EN ISO 8339, Building construction — Sealants — Determination of tensile properties (Extension to break) (ISO 8339:2005) EN ISO 8340, Building construction — Sealants — Determination of tensile properties at maintained extension (ISO 8340:2005) EN ISO 9046, Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants at constant temperature (ISO 9046:2002)
(ISO 10563:2005) EN ISO 10590, Building construction — Sealants — Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) EN ISO 10591, Building construction — Sealants — Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005) EN ISO 11358, Plastics — Thermogravimetry (TG) of polymers — General principles (ISO 11358:1997) EN ISO 11431, Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass (ISO 11431:2002) EN ISO 11432, Building construction — Sealants — Determination of resistance to compression
(ISO 11432:2005) EN ISO 11600, Building construction — Jointing products — Classification and requirements for sealants
(ISO 11600:2002) EN ISO 11925-2, Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single-flame source test (ISO 11925-2:2002) ISO 13640, Building construction — Jointing products — Specifications for test substrates 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 26927:1990 and the following apply. 3.1 non-reactive sealants mainly physical drying mechanism, without significant change in the molecular weight of the main polymer 3.2 reactive sealants mainly curing by chemical reaction, with significant increase of the molecular weight of the main polymer 3.3 cure irreversible transformation of a sealant from a liquid or paste like state into a hardened or rubber like solid state 3.4 uncured/wet state of a sealant prior to the above transformation SIST EN 15651-2:2010

non-reactive, and one or multi-component (e.g. neutral cure, reactive silicone and one component, etc.). The primer shall be stated for the substrate concerned if relevant (name, chemical type, etc.) 4.1.2 Thermogravimetric test The test shall be carried out in accordance with EN ISO 11358 on the uncured or wet sealant, between 35 °C to 900 °C, temperature slope 10 °C/min, non-oxidative condition (e.g. nitrogen). A single sample shall be used for this test. A single specimen may be tested and there shall be no significant difference between the reference curve and derivative (profile). In the case of multi-component sealant, each component shall be evaluated (if relevant). 4.1.3 Specific Gravity test The determination of the specific grav
...