EN ISO 8062-3:2007/AC:2009
(Corrigendum)Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007/Cor 1:2009)
Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007/Cor 1:2009)
ISO - Taking over of an ISO Technical Corrigendum
Geometrische Produktspezifikationen (GPS) - Maß-, Form- und Lagetoleranzen für Formteile - Teil 3: Allgemeine Maß-, Form- und Lagetoleranzen und Bearbeitungszugaben für Gussstücke (ISO 8062-3:2007/Cor 1:2009)
Spécification géométrique des produits (GPS) - Tolérances dimensionnelles et géométriques des pièces moulées - Partie 3: Tolérances dimensionnelles et géométriques générales et surépaisseurs d'usinage pour les pièces moulées (ISO 8062-3:2007/Cor 1:2009)
Geometrijske specifikacije izdelkov - Dimenzijske in geometrijske tolerance zaformanih delov - 3. del: Splošne dimenzijske in geometrijske tolerance in dodatki za obdelavo ulitkov - Popravek AC
General Information
- Status
- Withdrawn
- Publication Date
- 10-Mar-2009
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 190 - Foundry technology
- Drafting Committee
- CEN/TC 190 - Foundry technology
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Mar-2023
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 19-Jan-2023
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN ISO 8062-3:2007/AC:2009 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007/Cor 1:2009)". This standard covers: ISO - Taking over of an ISO Technical Corrigendum
ISO - Taking over of an ISO Technical Corrigendum
EN ISO 8062-3:2007/AC:2009 is classified under the following ICS (International Classification for Standards) categories: 17.040.10 - Limits and fits. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 8062-3:2007/AC:2009 has the following relationships with other standards: It is inter standard links to EN ISO 8062-3:2023, EN ISO 8062-3:2007. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 8062-3:2007/AC:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Geometrijske specifikacije izdelkov - Dimenzijske in geometrijske tolerance zaformanih delov - 3. del: Splošne dimenzijske in geometrijske tolerance in dodatki za obdelavo ulitkov - Popravek ACGeometrische Produktspezifikationen (GPS) - Maß-, Form- und Lagetoleranzen für Formteile - Teil 3: Allgemeine Maß-, Form- und Lagetoleranzen und Bearbeitungszugaben für GussstückeSpécification géométrique des produits (GPS) - Tolérances dimensionnelles et géométriques des pièces moulées - Partie 3: Tolérances dimensionnelles et géométriques générales et surépaisseurs d'usinage pour les pièces mouléesGeometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings17.040.40Geometrical Product Specification (GPS)17.040.10Tolerance in ujemiLimits and fitsICS:Ta slovenski standard je istoveten z:EN ISO 8062-3:2007/AC:2009SIST EN ISO 8062-3:2007/AC:2009en01-junij-2009SIST EN ISO 8062-3:2007/AC:2009SLOVENSKI
STANDARDSIST ISO 8062:19951DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 8062-3:2007/ACMarch 2009Mars 2009März 2009ICS 17.040.10English versionVersion FrançaiseDeutsche FassungGeometrical Product Specifications (GPS) - Dimensional and geometricaltolerances for moulded parts - Part 3: General dimensional and geometricaltolerances and machining allowances for castings (ISO 8062-3:2007/Cor1:2009)Spécification géométrique des produits(GPS) - Tolérances dimensionnelles etgéométriques des pièces moulées - Partie3: Tolérances dimensionnelles etgéométriques générales et surépaisseursd'usinage pour les pièces moulées (ISO8062-3:2007/Cor 1:2009)Geometrische Produktspezifikationen(GPS) - Maß-, Form- und Lagetoleranzenfür Formteile - Teil 3: Allgemeine Maß-,Form- und Lagetoleranzen undBearbeitungszugaben für Gussstücke (ISO8062-3:2007/Cor 1:2009)This corrigendum becomes effective on 11 March 2009 for incorporation in the three official languageversions of the EN.Ce corrigendum prendra effet le 11 mars 2009 pour incorporation dans les trois versions linguistiquesofficielles de la EN.Die Berichtigung tritt am 11.März 2009 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...