EN 12927-1:2004

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Safety requirements for cableway installations designed to carry persons - Ropes - Part 1: Selection criteria for ropes and their end fixingsPrescriptions de sécurité des installations a câbles transportant des personnes - Câbles - Partie 1 : Criteres de sélection des câbles et de leurs attaches d'extrémitéSicherheitsanforderungen für Seilbahnen für den Personenverkehr - Seile - Teil 1: Auswahlkriterien für Seile und SeilendbefestigungenTa slovenski standard je istoveten z:EN 12927-1:2004SIST EN 12927-1:2005en45.100Cableway equipmentICS:SLOVENSKI
STANDARDSIST EN 12927-1:200501-januar-2005

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 12927-1October 2004ICS 45.100English versionSafety requirements for cableway installations designed to carrypersons - Ropes - Part 1: Selection criteria for ropes and theirend fixingsPrescriptions de sécurité des installations à câblestransportant des personnes - Câbles - Partie 1 : Critères desélection des câbles et de leurs attaches d'extrémitéSicherheitsanforderungen für Seilbahnen undSchleppaufzüge des Personenverkehrs - Seile - Teil 1:Auswahlkriterien für Seile und SeilbefestigungenThis European Standard was approved by CEN on 23 August 2004.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2004 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 12927-1:2004: E

Relationship between this European Standard and the Essential Requirements of EU Directive 2000/9/EC relating to cableway installations designed to carry persons.11 Table ZA — Correspondence between this European Standard and Directive 2000/9/EC relating to cableway installations designed to carry persons.11

– Ropes":  Part 1: Selection criteria for ropes and their end fixings  Part 2: Safety factors  Part 3: Long splicing of 6 strand hauling, carrying-hauling and towing ropes  Part 4: End fixings  Part 5: Storage, transportation, installation and tensioning  Part 6: Discard criteria  Part 7: Inspection, repair and maintenance  Part 8: Magnetic rope testing (MRT) This European Standard forms part of the standards programme adopted by the CEN Technical Board in relation of safety requirements for passenger transportation by rope. This programme includes the following standards : 1) Safety requirements for cableway installations designed to carry persons
- Terminology 2) Safety requirements for cableway installations designed to carry persons
- General requirements
3) Safety requirements for cableway installations designed to carry persons
– Calculations 4) Safety requirements for cableway installations designed to carry persons
- Ropes
5) Safety requirements for cableway installations designed to carry persons
- Tensioning devices
6) Safety requirements for cableway installations designed to carry persons
- Drive systems and other mechanical equipment 7) Safety requirements for cableway installations designed to carry persons
– Carriers
8) Safety requirements for cableway installations designed to carry persons
- Electrical equipment other than for drive systems 9) Safety requirements for cableway installations designed to carry persons
- Civil engineering works
– Pre-commissioning inspection, maintenance and operational inspection and checks 11) Safety requirements for cableway installations designed to carry persons
– Recovery and evacuation
12) Safety requirements for passenger transportation by rope - Operation
13) Safety requirements for cableway installations designed to carry persons
- Quality assurance
Together these form a series of standards regarding design, manufacture, production, maintenance and operation of all installations for passenger transportation by rope. In respect of ski-tows, the drafting of this European Standard has been guided by the works of the International Organisation for Transportation by rope (OITAF). According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
...