EN ISO 12572:2016/A1:2024
(Amendment)Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/Amd 1:2024)
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/Amd 1:2024)
Wärme- und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten - Bestimmung der Wasserdampfdurchlässigkeit - Verfahren mit einem Prüfgefäß - Änderung 1 (ISO 12572:2016/Amd 1:2024)
Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination des propriétés de transmission de la vapeur d'eau - Méthode de la coupelle - Amendement 1 (ISO 12572:2016/Amd 1:2024)
Higrotermalno obnašanje gradbenih materialov in proizvodov - Ugotavljanje lastnosti za prehod vodne pare - Metoda s čašami - Dopolnilo 1 (ISO 12572:2016/Amd 1:2024)
General Information
Relations
Overview
The EN ISO 12572:2016/A1:2024 amendment updates the established European and International Standard for determining the hygrothermal performance of building materials and products through the water vapour transmission properties using the cup method. Approved by the European Committee for Standardization (CEN) in September 2024, this amendment refines test procedures and calculation formulas essential for accurate assessment of moisture diffusion in construction materials. The standard is vital for architects, engineers, material scientists, and quality inspectors focused on building envelope performance, moisture control, and durability.
Key Topics
- Water vapour transmission measurement: This standard specifies methods to evaluate how building materials transmit water vapour, which is critical for managing moisture and preventing damage in constructions.
- Cup method refinement: The amendment modifies the existing cup method, a widely used laboratory test involving sealed cups filled with desiccant or water to measure vapour flux.
- Water vapour resistance factor (μ): Updated calculation methods using precise formulas, including the Schirmer formula for water vapour permeability of air (δa), are introduced for better accuracy.
- Barometric pressure considerations: The amendment clarifies that μ, the water vapour resistance factor, is generally independent of barometric pressure, providing guidance on calculating δa at actual barometric conditions.
- Thermal and moisture performance: By improving test reliability, the standard supports better understanding of hygrothermal behaviors influencing insulation, condensation risks, and overall material longevity.
Applications
This standard amendment is applicable in diverse sectors related to construction and building materials, including:
- Material testing laboratories: For routine quality control and conformity assessment of building materials like insulation panels, vapour barriers, and cladding systems.
- Building design and construction: Helps architects and engineers select materials with suitable vapour transmission properties to enhance indoor air quality and structural integrity.
- Energy-efficient buildings: Essential for developing airtight yet breathable building envelopes that comply with energy-saving directives and moisture control best practices.
- Waterproofing and moisture protection: Supports evaluation of products designed to resist moisture ingress while allowing controlled vapor diffusion, preventing mold and decay.
- Research and development: Facilitates innovation in sustainable and high-performance building materials with optimal hygrothermal characteristics.
Related Standards
- ISO 12572:2016 – The base international standard for water vapour transmission using the cup method.
- EN ISO 12572:2016 – The harmonized European version of the ISO 12572 standard.
- CEN/TC 89 – Technical committee responsible for thermal performance of buildings and components.
- Other hygrothermal standards – Standards covering thermal insulation, moisture control, and durability assessment of construction products.
- ISO/IEC Directives – Guidelines governing the development and maintenance of ISO standards in the building sector.
By adhering to EN ISO 12572:2016/A1:2024, stakeholders ensure precise, standardized methods for evaluating water vapour transmission properties of construction materials. This leads to enhanced building performance, longevity, and sustainability in alignment with European and international regulatory frameworks.
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2025
Higrotermalno obnašanje gradbenih materialov in proizvodov - Ugotavljanje
lastnosti za prehod vodne pare - Metoda s čašami - Dopolnilo 1 (ISO
12572:2016/Amd 1:2024)
Hygrothermal performance of building materials and products - Determination of water
vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/Amd
1:2024)
Wärme- und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten -
Bestimmung der Wasserdampfdurchlässigkeit - Verfahren mit einem Prüfgefäß -
Änderung 1 (ISO 12572:2016/Amd 1:2024)
Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination
des propriétés de transmission de la vapeur d'eau - Méthode de la coupelle -
Amendement 1 (ISO 12572:2016/Amd 1:2024)
Ta slovenski standard je istoveten z: EN ISO 12572:2016/A1:2024
ICS:
91.100.01 Gradbeni materiali na Construction materials in
splošno general
91.120.30 Zaščita pred vlago Waterproofing
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EN ISO 12572:2016/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2024
EUROPÄISCHE NORM
ICS 91.120.10
English Version
Hygrothermal performance of building materials and
products - Determination of water vapour transmission
properties - Cup method - Amendment 1 (ISO
12572:2016/Amd 1:2024)
Performance hygrothermique des matériaux et Wärme- und feuchtetechnisches Verhalten von
produits pour le bâtiment - Détermination des Baustoffen und Bauprodukten - Bestimmung der
propriétés de transmission de la vapeur d'eau - Wasserdampfdurchlässigkeit - Verfahren mit einem
Méthode de la coupelle - Amendement 1 (ISO Prüfgefäß - Änderung 1 (ISO 12572:2016/Amd
12572:2016/Amd 1:2024) 1:2024)
This amendment A1 modifies the European Standard EN ISO 12572:2016; it was approved by CEN on 1 September 2024.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12572:2016/A1:2024 E
worldwide for CEN national Members.
Contents Page
European foreword . 3
European foreword
This document (EN ISO 12572:2016/A1:2024) has been prepared by Technical Committee ISO/TC 163
"Thermal performance and energy use in the built environment" in collaboration with Technical
Committee CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of
which is held by SIS.
This Amendment to the European Standard EN ISO 12572:2016 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by April 2025, and
conflicting national standards shall be withdrawn at the latest by April 2025.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 12572:2016/Amd 1:2024 has been approved by CEN as EN ISO 12572:2016/A1:2024
without any modif
...
Frequently Asked Questions
EN ISO 12572:2016/A1:2024 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/Amd 1:2024)". This standard covers: Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/Amd 1:2024)
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method - Amendment 1 (ISO 12572:2016/Amd 1:2024)
EN ISO 12572:2016/A1:2024 is classified under the following ICS (International Classification for Standards) categories: 91.120.10 - Thermal insulation of buildings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 12572:2016/A1:2024 has the following relationships with other standards: It is inter standard links to EN ISO 12572:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
You can purchase EN ISO 12572:2016/A1:2024 directly from iTeh Standards. The document is available in PDF format and is delivered instantly after payment. Add the standard to your cart and complete the secure checkout process. iTeh Standards is an authorized distributor of CEN standards.
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...