EN ISO 2157:1995
(Main)Dental rotary instruments - Nominal diameters and designation code number (ISO 2157:1992)
Dental rotary instruments - Nominal diameters and designation code number (ISO 2157:1992)
Specifies the relevant characteristics of the working parts of dental rotary instruments, e.g. burs, laboratory burs, grinding instruments, diamond instruments, mandrels, etc. It does not cover the diameters of root canal instruments.
Zahnärztliche rotierende Instrumente - Nenndurchmesser und Bezeichnungsnummer (ISO 2157:1992)
In dieser Internationalen Norm sind die Nenndurchmesser für die Arbeitsteile zahnärztlicher rotierender Instrumente, wie zum Beispiel Bohrer, Laborbohrer, Schleifinstrumente, Diamantinstrumente, Mandrelle usw. und die entsprechenden Bezeichnung aufgeführt. Diese Norm gilt nicht für die Durchmesser von Wurzelkanalinstrumenten.
Instruments rotatifs dentaires - Diamètres nominaux et désignation par numéro de code (ISO 2157:1992)
La présente Norme internationale prescrit les diamètres nominaux des parties actives des instruments rotatifs dentaires, par exemple les fraises, les fraises de laboratoire (fraises techniques), les instruments abrasifs, les instruments diamantés, les mandrins, etc., et les désignations correspondantes. Elle ne couvre pas les diamètres des instruments pour canaux radiculaires.
Dental rotary instruments - Nominal diameters and designation code number (ISO 2157:1992)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2000
Dental rotary instruments - Nominal diameters and designation code number (ISO
2157:1992)
Dental rotary instruments - Nominal diameters and designation code number (ISO
2157:1992)
Zahnärztliche rotierende Instrumente - Nenndurchmesser und Bezeichnungsnummer
(ISO 2157:1992)
Instruments rotatifs dentaires - Diametres nominaux et désignation par numéro de code
(ISO 2157:1992)
Ta slovenski standard je istoveten z: EN ISO 2157:1995
ICS:
11.060.25 =RERWHKQLþQLLQVWUXPHQWL Dental instruments
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
INTERNATIONAL
STANDARD
Third edition
1992-06-15
Dental rotary instruments - Nominal diameters
and designation code number
Instrumenfs rota tifs dentaires - DiamHres
nominaux et dksignation par
num&o de code
--
Reference number
ISO 2157:1992( E)
ISO 2157:1992(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide
federation of national Standards bodies (ISO member bodies). The work
of preparing International Standards is normally carried out through ISO
technical committees. Esch member body interested in a subject for
which a technical committee has been established has the right to be
represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the
work. ISO collaborates closely with the International Electrotechnical
Commission (IEC) on all matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are
circulated to the member bodies for voting. Publication as an Inter-
national Standard requires approval by at least 75 % of the member
bodies casting a vote.
International Standard ISO 2157 was prepared by Technical Committee
ISO/TC 106, Dentistry, Sub-Committee SC 4, Dental instruments.
This third edition cancels and replaces the second edition
(ISO 2157:1984), differentes from which are indicated in the Introduction.
Annex A of this International Standard is for information only.
0 ISO 1992
All rights reserved. No part of this publication may be reproduced or utilized in any form
or by any means, electronie or mechanical, including photocopying and microfilm, without
Permission in writing from the publisher.
international Organizati on for Standardization
Case Postale 56 l CH-I 21 1 Geneve 20 l Switz erland
Printed in Switzeriand
ii
ISO 2157:1992(E)
Introduction
This International Sta
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.