EN 10109-3:1994
(Main)Metallic materials - Hardness test - Part 3: Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A,B,C,D,E,F,G,H,K,N,T)
Metallic materials - Hardness test - Part 3: Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A,B,C,D,E,F,G,H,K,N,T)
This Draft European Standard specifies a method for the calibration of standardized blocks to be used in Rockwell hardness testing machines (scales A, B,C,D,E,F,G,K,N,T) for the indirect verification of these machines, as described in EN 10109-2. The normative annex A shows the uniformity requirements of the standardized blocks diagrammatically.
Metallische Werkstoffe - Härteprüfung - Teil 3: Kalibrierung von Härtevergleichsplatten für die Prüfung von Härteprüfgeräten nach Rockwell (Skalen A,B,C,D,E,F,G,H,K,N,T)
In dieser Europäischen Norm ist die Kalibrierung von Härtevergleichsplatten, festgelegt, die bei der indirekten Prüfung von Härteprüfmaschinen nach Rockwell (Skalen A,B,C,D,E,F,G,H,K,N,T)) nach EN 10109-2 benutzt werden. Der Anhang A enthält die Diagramme für die Ermittlung der Gleichmässigkeit von Härtevergleichsplatten.
Matériaux métalliques - Essai de dureté - Partie 3: Etalonnage des blocs de référence à utiliser pour les machines d'essai de dureté Rockwell (échelles A,B,C,D,E,F,G,H,K,N,T)
Le présent projet de norme européenne prescrit une méthode pour l'étalonnage des blocs de référence utilisés pour les machines d'essai de dureté Rockwell (échelles A,B,C,D,E,F,G,H,K,N,T) en vue de la vérification indirecte de ces machines décrites dans L'EN 10109-2. L'annexe normative A donne le diagramme de l'uniformité des blocs de référence.
Kovinski materiali - Preskus trdote - 3. del: Kalibracija standardiziranih primerjalnih ploščic za preverjanje merilnikov trdote po Rockwellu (skale A, B, C, D, E, F, G, H, K, N, T)
General Information
- Status
- Withdrawn
- Publication Date
- 24-Oct-1994
- Withdrawal Date
- 31-Aug-1999
- Technical Committee
- ECISS/TC 101 - Test methods for steel (other than chemical analysis)
- Drafting Committee
- ECISS/TC 1/SC 1 - Mechanical testing
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 01-Sep-1999
- Completion Date
- 01-Sep-1999
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Element Materials Technology
Materials testing and product certification.
Inštitut za kovinske materiale in tehnologije
Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.
Sponsored listings
Frequently Asked Questions
EN 10109-3:1994 is a standard published by the European Committee for Standardization (CEN). Its full title is "Metallic materials - Hardness test - Part 3: Calibration of standardized blocks to be used for Rockwell hardness testing machines (scales A,B,C,D,E,F,G,H,K,N,T)". This standard covers: This Draft European Standard specifies a method for the calibration of standardized blocks to be used in Rockwell hardness testing machines (scales A, B,C,D,E,F,G,K,N,T) for the indirect verification of these machines, as described in EN 10109-2. The normative annex A shows the uniformity requirements of the standardized blocks diagrammatically.
This Draft European Standard specifies a method for the calibration of standardized blocks to be used in Rockwell hardness testing machines (scales A, B,C,D,E,F,G,K,N,T) for the indirect verification of these machines, as described in EN 10109-2. The normative annex A shows the uniformity requirements of the standardized blocks diagrammatically.
EN 10109-3:1994 is classified under the following ICS (International Classification for Standards) categories: 77.040.10 - Mechanical testing of metals. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10109-3:1994 has the following relationships with other standards: It is inter standard links to EN ISO 6508-3:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10109-3:1994 is associated with the following European legislation: Standardization Mandates: M/BC/CEN/89/10. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10109-3:1994 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.GL]LUDQLKMetallische Werkstoffe - Härteprüfung - Teil 3: Kalibrierung von Härtevergleichsplatten für die Prüfung von Härteprüfgeräten nach Rockwell (Skalen A,B,C,D,E,F,G,H,K,N,T)Matériaux métalliques - Essai de dureté - Partie 3: Etalonnage des blocs de référence a utiliser pour les machines d'essai de dureté Rockwell (échelles A,B,C,D,E,F,G,H,K,N,T)Metallic materials - Hardness test - Part 3: Calibration of standardized block
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...