EN ISO 4759-3:2000
(Main)Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Products grades A and C (ISO 4759-3:2000)
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Products grades A and C (ISO 4759-3:2000)
Toleranzen für Verbindungselemente - Teil 3: Flache Scheiben für Schrauben und Muttern - Produktklassen A und C (ISO 4759-3:2000)
Dieser Teil von ISO 4759 enthält eine Auswahl von Toleranzen zur Anwendung bei der Erstellung von ISO-Produktnormen für gestanzte flache Scheiben, Produktklassen A und C, für die Verwendung mit Schrauben und Muttern mit Gewinde-Nenndurchmessern von 1 mm bis 150 mm. Es wird empfohlen, diese Toleranzen auch für nicht genormte Scheiben anzuwenden. ANMERKUNG 1: Die Produktklasse bezieht sich auf die Qualität der Produkte und auf die Größe der Toleranzen. Der informative Anhang A enthält Toleranzen aus ISO 286-1 und ISO 286-2.
Tolérances pour éléments de fixation - Partie 3: Rondelles Plates pour vis et écrous - Grades A et C (ISO 4759-3:2000)
La présente partie de l'ISO 4759 établit une sélection des tolérances à utiliser dans la préparation des normes de produits ISO concernant les rondelles plates de grades A et C pour les vis et les écrous de diamètre nominal de filetage de 1 mm à 150 mm inclus.Il est recommandé d'employer également ces tolérances pour les rondelles non normalisées.NOTE : Les grades se rapportent à la qualité du produit et à la grandeur des tolérances.L'annexe A (informative) donne les tolérances issues de l'ISO 286-1 et de l'ISO 286-2.
Tolerance za mehanske vezne elemente - 3. del: Ravne podložke za vijake in matice - Razreda izdelave A in C (ISO 4759-3: 2000)
General Information
- Status
- Withdrawn
- Publication Date
- 30-Apr-2000
- Withdrawal Date
- 20-Jan-2026
- Technical Committee
- CEN/TC 185 - Threaded and nonthreaded mechanical fasteners and accessories
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 29-Jun-2016
- Completion Date
- 21-Jan-2026
Relations
- Effective Date
- 26-Mar-2014
Frequently Asked Questions
EN ISO 4759-3:2000 is a standard published by the European Committee for Standardization (CEN). Its full title is "Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Products grades A and C (ISO 4759-3:2000)". This standard covers: La présente partie de l'ISO 4759 établit une sélection des tolérances à utiliser dans la préparation des normes de produits ISO concernant les rondelles plates de grades A et C pour les vis et les écrous de diamètre nominal de filetage de 1 mm à 150 mm inclus.Il est recommandé d'employer également ces tolérances pour les rondelles non normalisées.NOTE : Les grades se rapportent à la qualité du produit et à la grandeur des tolérances.L'annexe A (informative) donne les tolérances issues de l'ISO 286-1 et de l'ISO 286-2.
La présente partie de l'ISO 4759 établit une sélection des tolérances à utiliser dans la préparation des normes de produits ISO concernant les rondelles plates de grades A et C pour les vis et les écrous de diamètre nominal de filetage de 1 mm à 150 mm inclus.Il est recommandé d'employer également ces tolérances pour les rondelles non normalisées.NOTE : Les grades se rapportent à la qualité du produit et à la grandeur des tolérances.L'annexe A (informative) donne les tolérances issues de l'ISO 286-1 et de l'ISO 286-2.
EN ISO 4759-3:2000 is classified under the following ICS (International Classification for Standards) categories: 21.060.30 - Washers, locking elements. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 4759-3:2000 has the following relationships with other standards: It is inter standard links to EN ISO 4759-3:2016. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 4759-3:2000 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tolerance za mehanske vezne elemente - 3. del: Ravne podložke za vijake in matice - Razreda izdelave A in C (ISO 4759-3: 2000)Toleranzen für Verbindungselemente - Teil 3: Flache Scheiben für Schrauben und Muttern - Produktklassen A und C (ISO 4759-3:2000)Tolérances pour éléments de fixation - Partie 3: Rondelles Plates pour vis et écrous - Grades A et C (ISO 4759-3:2000)Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Products grades A and C (ISO 4759-3:2000)21.060.30Podložke, varovalni elementiWashers, locking elementsICS:Ta slovenski standard je istoveten z:EN ISO 4759-3:2000SIST EN ISO 4759-3:2001en01-julij-2001SIST EN ISO 4759-3:2001SLOVENSKI
STANDARDSIST ISO 4759-3:19961DGRPHãþD
ReferencenumberISO4759-3:2000(E)©ISO2000INTERNATIONALSTANDARDISO4759-3Thirdedition2000-05-01Tolerancesforfasteners—Part3:Plainwashersforbolts,screwsandnuts—ProductgradesAandCTolérancespourélémentsdefixation—Partie3:Rondellesplatespourvisetécrous—GradesAetCSIST EN ISO 4759-3:2001
ISO4759-3:2000(E)PDFdisclaimerThisPDFfilemaycontainembeddedtypefaces.InaccordancewithAdobe'slicensingpolicy,thisfilemaybeprintedorviewedbutshallnotbeeditedunlessthetypefaceswhichareembeddedarelicensedtoandinstalledonthecomputerperformingtheediting.Indownloadingthisfile,partiesacceptthereintheresponsibilityofnotinfringingAdobe'slicensingpolicy.TheISOCentralSecretariatacceptsnoliabilityinthisarea.AdobeisatrademarkofAdobeSystemsIncorporated.DetailsofthesoftwareproductsusedtocreatethisPDFfilecanbefoundintheGeneralInforelativetothefile;thePDF-creationparameterswereoptimizedforprinting.EverycarehasbeentakentoensurethatthefileissuitableforusebyISOmemberbodies.Intheunlikelyeventthataproblemrelatingtoitisfound,pleaseinformtheCentralSecretariatattheaddressgivenbelow.©ISO2000Allrightsreserved.Unlessotherwisespecified,nopartofthispublicationmaybereproducedorutilizedinanyformorbyanymeans,electronicormechanical,includingphotocopyingandmicrofilm,withoutpermissioninwritingfromeitherISOattheaddressbeloworISO'smemberbodyinthecountryoftherequester.ISOcopyrightofficeCasepostale56CH-1211Geneva20Tel.+41227490111Fax+41227341079E-mailcopyright@iso.chWebwww.iso.chPrintedinSwitzerlandii©ISO2000–AllrightsreservedSIST EN ISO 4759-3:2001
ISO4759-3:2000(E)©ISO2000–AllrightsreservediiiForewordISO(theInternationalOrganizationforStandardization)isaworldwidefederationofnationalstandardsbodies(ISOmemberbodies).TheworkofpreparingInternationalStandardsisnormallycarriedoutthroughISOtechnicalcommittees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhastherighttoberepresentedonthatcommittee.Internationalorganizations,governmentalandnon-governmental,inliaisonwithISO,alsotakepartinthework.ISOcollaboratescloselywiththeInternationalElectrotechnicalCommission(IEC)onallmattersofelectrotechnicalstandardization.InternationalStandardsaredraftedinaccordancewiththerulesgivenintheISO/IECDirectives,Part3.DraftInternationalStandardsadoptedbythetechnicalcommitteesarecirculatedtothememberbodiesforvoting.PublicationasanInternationalStandardrequiresapprovalbyatleast75%ofthememberbodiescastingavote.AttentionisdrawntothepossibilitythatsomeoftheelementsofthispartofISO4759maybethesubjectofpatentrights.ISOshallnotbeheldresponsibleforidentifyinganyorallsuchpatentrights.InternationalStandardISO4759-3waspreparedbyTechnicalCommitteeISO/TC2,Fasteners.Thisthirdeditioncancelsandreplacesthesecondedition(ISO4759-3:1991),ofwhichhasbeentechnicallyrevised.ISO4759consistsofthefollowingparts,underthegeneraltitle,Tolerancesforfasteners:—Part1:Bolts,screws,studsandnuts—ProductgradesA,BandC—Part2:Bolts,screwsandnutswiththreaddiametersfrom1upto3mmandproductgradeF,forfinemechanics—Part3:Plainwashersforbolts,screwsandnuts—ProductgradesAandCAnnexAofthispartofISO4759isforinformationonly.SIST EN ISO 4759-3:2001
INTERNATIONALSTANDARDISO4759-3:2000(E)©ISO2000–Allrightsreserved1Tolerancesforfasteners—Part3:Plainwashersforbolts,screwsandnuts—ProductgradesAandC1ScopeThispartofISO4759establishesaselectionoftolerancesforuseinthepreparationofISOproductstandardsforpunchedplainwashersofproductgradesAandC,forusewithbolts,screwsandnutsofnominalthreaddiametersoffrom1mmto150mminclusive.Itisrecommendedthatthesetolerancesalsobeusedfornon-stand
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...