EN 13089:2011
(Main)Mountaineering equipment - Ice-tools - Safety requirements and test methods
Mountaineering equipment - Ice-tools - Safety requirements and test methods
This European Standard specifies safety requirements and test methods for ice-tools for use in mountaineering including climbing, and as a buried anchor for protection against falls.
Bergsteigerausrüstung - Eisgeräte - Sicherheitstechnische Anforderungen und Prüfverfahren
Diese Europäische Norm legt sicherheitstechnische Anforderungen und Prüfverfahren für Eisgeräte fest, die beim Bergsteigen, einschließlich Klettern, verwendet werden und als vergrabener Ankerpunkt zum Schutz gegen Absturz dienen.
Equipement d'alpinisme et d'escalade - Outils à glace - Exigences de sécurité et méthodes d'essai
La présente Norme européenne spécifie des exigences de sécurité et des méthodes d’essai relatives aux outils à glace utilisés dans la pratique de l’alpinisme et de l’escalade, ainsi que comme point d’ancrage enfoui dans la neige pour la protection contre les chutes.
Gorniška oprema - Orodje za led - Varnostne zahteve in preskusne metode
Ta evropski standard določa varnostne zahteve in preskusne metode za orodje za led, ki se uporablja pri gorništvu, vključno s plezanjem, kot zakopano sidro za varovanje pred padci.
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gorniška oprema - Orodje za led - Varnostne zahteve in preskusne metodeBergsteigerausrüstung - Eisgeräte - Sicherheitstechnische Anforderungen und PrüfverfahrenEquipement d'alpinisme et d'escalade - Outils a glace - Exigences de sécurité et méthodes d'essaiMountaineering equipment - Ice-tools - Safety requirements and test methods97.220.40Oprema za športe na prostem in vodne športeOutdoor and water sports equipmentICS:Ta slovenski standard je istoveten z:EN 13089:2011SIST EN 13089:2011en01-julij-2011SIST EN 13089:2011SLOVENSKI
STANDARDSIST EN 13089:20001DGRPHãþD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13089
March 2011 ICS 97.220.40 Supersedes EN 13089:1999English Version
Mountaineering equipment - Ice-tools -Safety requirements and test methods
Equipement d'alpinisme et d'escalade - Outils à glace - Exigences de sécurité et méthodes d'essai
Bergsteigerausrüstung - Eisgeräte - Sicherheitstechnische Anforderungen und Prüfverfahren This European Standard was approved by CEN on 5 February 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2011 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13089:2011: ESIST EN 13089:2011
Standards on mountaineering equipment . 13Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 89/686/EEC . 15 SIST EN 13089:2011
Key 1 Shaft of the ice-tool 2 Pick of the ice-tool Figure 1 — Main parts of an ice-tool 4 Safety requirements 4.1 Edges All edges of the ice-tool with which the user's hands can come into contact shall be free from burrs. The shaft of the ice tool has to be free of sharp edges. 4.2 Shaft strength When tested in accordance with 5.3.3, on removal of the load from the shaft the permanent deformation at the point of application of the load shall not exceed 3 mm or the calculated fK value. 4.3 Strength in the load direction YY When tested in the load direction YY (see Figure 2) in accordance with 5.3.4, a) the test sample shall not break; b) no component
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.