EN ISO 19014-3:2018

SLOVENSKI STANDARD
01-januar-2019
6WURML]D]HPHOMVNDGHOD)XQNFLMVNDYDUQRVWGHO2NROMVNHLQSUHVNXVQH
]DKWHYH]DHOHNWURQVNHLQHOHNWULþQHNRPSRQHQWHXSRUDEOMHQHYGHOLKNUPLOQHJD
VLVWHPDNLVRSRYH]DQL]YDUQRVWMR,62
Earth-moving machinery - Functional safety - Part 3: Environmental performance and
test requirements of electronic and electrical components used in safety-related parts of
the control system (ISO 19014-3:2018)
Erdbaumaschinen - Sicherheit - Teil 3: Umweltanforderungen und Testanforderungen
von elektronischen und elektrischen Komponenten von sicherheitsrelevanten
Steuerungssystemen (ISO 19014-3:2018)
Engins de terrassement - Sécurité - Partie 3: Exigences environnementales de
performance et de test de composants électroniques et électriques utilisés dans les
parties du système de commande liées à la sécurité (ISO 19014-3:2018)
Ta slovenski standard je istoveten z: EN ISO 19014-3:2018
ICS:
53.100 Stroji za zemeljska dela Earth-moving machinery
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 19014-3
EUROPEAN STANDARD
NORME EUROPÉENNE
October 2018
EUROPÄISCHE NORM
ICS 53.100
English Version
Earth-moving machinery - Functional safety - Part 3:
Environmental performance and test requirements of
electronic and electrical components used in safety-related
parts of the control system (ISO 19014-3:2018)
Engins de terrassement - Sécurité fonctionnelle - Partie Erdbaumaschinen - Sicherheit - Teil 3:
3: Exigences pour la performance environnementale et Umweltanforderungen und Testanforderungen von
l'essai des composants électroniques et électriques elektronischen und elektrischen Komponenten von
utilisés dans les parties relatives à la sécurité du sicherheitsrelevanten Steuerungssystemen (ISO
système de commande (ISO 19014-3:2018) 19014-3:2018)
This European Standard was approved by CEN on 8 September 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19014-3:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 19014-3:2018) has been prepared by Technical Committee ISO/TC 127 "Earth-
moving machinery" in collaboration with Technical Committee CEN/TC 151 “Construction equipment
and building material machines - Safety” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by April 2019, and conflicting national standards shall be
withdrawn at the latest by April 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 19014-3:2018 has been approved by CEN as EN ISO 19014-3:2018 without any
modification.
INTERNATIONAL ISO
STANDARD 19014-3
First edition
2018-09
Earth-moving machinery —
Functional safety —
Part 3:
Environmental performance and
test requirements of electronic and
electrical components used in safety-
related parts of the control system
Engins de terrassement — Sécurité fonctionnelle —
Partie 3: Exigences pour la performance environnementale et l'essai
des composants électroniques et électriques utilisés dans les parties
relatives à la sécurité du système de commande
Reference number
ISO 19014-3:2018(E)
©
ISO 2018
ISO 19014-3:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 19014-3:2018(E)
Contents Page
Foreword .v
Introduction .vi
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 2
4 Functional status classifications . 2
4.1 Class A . 2
4.2 Class B . 2
4.3 Class C . 2
4.4 Class D . 2
5 Tests and requirements . 2
5.1 General . 2
5.2 Dust . 3
5.2.1 Purpose . 3
5.2.2 Test method . 3
5.3 Chemical resistance . 3
5.3.1 Purpose . 3
5.3.2 Test method . 3
5.4 Salt spray . 4
5.4.1 Purpose . 4
5.4.2 Test method . 4
5.5 Pressure wash . 4
5.5.1 Purpose . 4
5.5.2 Test method . 4
5.6 Random vibration . 4
5.6.1 Purpose . 4
5.6.2 Test method . 4
5.7 Operating shock . 5
5.7.1 Purpose . 5
5.7.2 Test method . 5
5.8 Temperature cycles . 6
5.8.1 Purpose . 6
5.8.2 Test method . 6
5.9 Thermal shock . 7
5.9.1 Purpose . 7
5.9.2 Test method . 7
5.10 Humidity cycles . 7
5.10.1 Purpose . 7
5.10.2 Test method .
...