Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing

This document specifies the characteristics of flexible sheets for underlays which are to be used under roof covering of discontinuous roofs. It specifies the requirements and test methods and provides for the evaluation of conformity of the products with the requirements of this document.

Abdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 1: Unterdeck- und Unterspannbahnen für Dachdeckungen

Diese Europäische Norm legt die Eigenschaften von Abdichtungsbahnen zur Anwendung als Unterdeck  und Unterspannbahnen fest, die unter der Dachdeckung zu verlegen sind. Sie legt die Anforderungen und Prüfverfahren fest und behandelt die Bewertung der Konformität der Produkte nach den hierin angegebenen Anforderungen.

Feuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 1: Ecrans souples de sous toiture pour couverture en petits éléments discontinus

La présente Norme européenne spécifie les caractéristiques des écrans souples de sous-toiture destinés à être utilisés sous les couvertures en petits éléments discontinus. Elle est limitée aux produits dont la caractéristique "réaction au feu" est revendiquée de classe E ou F selon l'EN 13501-1.

Hidroizolacijski trakovi - Definicije in lastnosti podložnih folij - 1. del: Podložne folije za strehe

General Information

Status
Withdrawn
Publication Date
15-Feb-2005
Withdrawal Date
16-Sep-2008
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
17-Sep-2008
Completion Date
17-Sep-2008

Relations

Buy Standard

Standard
EN 13859-1:2005
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Hidroizolacijski trakovi - Definicije in lastnosti podložnih folij - 1. del: Podložne folije za streheAbdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 1: Unterdeck- und Unterspannbahnen für DachdeckungenFeuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples - Partie 1: Ecrans souples de sous toiture pour couverture en petits éléments discontinusFlexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing91.100.50Veziva. Tesnilni materialiBinders. Sealing materials91.060.20StreheRoofs01.040.91Gradbeni materiali in gradnja (Slovarji)Construction materials and building (Vocabularies)ICS:Ta slovenski standard je istoveten z:EN 13859-1:2005SIST EN 13859-1:2005en01-maj-2005SIST EN 13859-1:2005SLOVENSKI
STANDARD
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13859-1
February 2005 ICS 01.040.91; 91.100.50 English version
Flexible sheets for waterproofing - Definitions and characteristics of underlays - Part 1: Underlays for discontinuous roofing
Feuilles souples d'étanchéité - Définitions et caractéristiques des écrans souples de sous toiture -Partie 1: Ecrans souples de sous toiture pour couverture en petits éléments discontinus
Abdichtungsbahnen - Definitionen und Eigenschaften von Unterdeck- und Unterspannbahnen - Teil 1: Unterdeck-und Unterspannbahnen für Dachdeckungen This European Standard was approved by CEN on 22 November 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36
B-1050 Brussels © 2005 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13859-1:2005: ESIST EN 13859-1:2005

Determination of tensile properties.12 Annex B (normative)
Determination of resistance to tearing.15 Annex C (normative)
Artificial ageing by exposure to UV and heat.17 Annex D (normative)
Initial type test and frequencies of testing for factory production control.20 Annex E (informative)
Example of a product data sheet.22 Bibliography.31
2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1107-1, Flexible sheets for waterproofing — Part 1: Bitumen sheets for roof waterproofing - Determination of dimensional stability EN 1107-2, Flexible sheets for waterproofing — Determination of dimensional stability — Part 2: Plastic and rubber sheets for roof waterproofing EN 1109, Flexible sheets for waterproofing — Bitumen sheets for roof waterproofing — Determination of flexibility at low temperature EN 1296, Flexible sheets for waterproofing— Bitumen, plastic and rubber sheets for roofing— Method of artificial ageing by long term exposure to elevated temperature EN 1297, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water EN 1848-1, Flexible sheets for waterproofing — Determination of length, width and straightness — Part 1: Bitumen sheets for roof waterproofing EN 1848-2, Flexible sheets for waterproofing — Determination of length, width, straightness and flatness — Part 2: Plastic and rubber sheets for roof waterproofing EN 1849-1, Flexible sheets for waterproofing — Determination of thickness and mass per unit area — Part 1: Bitumen sheets for roof waterproofing EN 1849-2, Flexible sheets for waterproofing — Determination of thickness and mass per unit area — Part 2: Plastic and rubber sheets for roof waterproofing EN 1928:2001, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Determination of watertightness EN 1931, Flexible sheets for waterproofing — Bitumen, plastic and rubber sheets for roof waterproofing — Determination of water vapour transmission properties EN 12310-1:1999, Flexible sheets for waterproofing — Part 1: Bitumen sheets for waterproofing — Determination of resistance to tearing (nail shank) EN 12311-1, Flexible sheets for waterproofing — Part 1: Bitumen sheets for roof waterproofing — Determination of tensile properties. EN 13111, Flexible sheets for waterproofing — Underlays for discontinuous roofing and walls — Determination of resistance to water penetration. SIST EN 13859-1:2005

EN 13501-1:2002, Fire classification of construction products and building elements — Part 1: Classification using test data from reaction to fire tests. EN 13859-2:2004, Flexible sheets for waterproofing — Definitions and characteristics of underlays — Part 2: Underlays for walls. EN ISO 11925-2, Reaction to fire tests — Ignitability of building products subjected to direct impingement of flame — Part 2: Single-flame source test (ISO 11925-2:2002). EN ISO 12572:2001, Hygrothermal performance of building materials and products — Determination of water vapour transmission properties (ISO 12572:2001). 3 Terms and definitions For the purposes of this document, the terms and definitions given in EN 13416:2001 and the following apply. 3.1 waterproofing action to prevent the passage of water from one plane to another 3.2 underlays for discontinuous roofing factory made flexible sheets of plastics, bitumen, rubber and other suitable materials, which are used as underlay to coverings of sloping roofs (e.g. tiles, slates) 3.3 manufacturer's limiting value (MLV) value stated by the manufacturer to be met during testing. The manufacturer's limiting value can be a minimum or a maximum value according to statements made under product characteristics of this document 3.4 manufacturer's declared value (MDV) value declared by the manufacturer accompanied by a declared tolerance 3.5 sampling procedure used to select or constitute a sample 3.6 sample sheet from which a test piece is taken 3.7 test piece part of the sample from which test specimens are taken 3.8 test specimen piece of precise dimensions taken from the test piece SIST EN 13859-1:2005

4.3 Application related characteristics 4.3.1 Reaction to fire Where required, the reaction to fire shall be determined in accordance with 5.2.2. 4.3.2 Resistance to water penetration 4.3.2.1 Class W1 The product shall be classified as resistant to water penetration Class W1 if it passes the resistance to water penetration test in accordance with 5.2.3. If the product fails the test of resistance to water penetration indicated in 5.2.3, it shall be tested in accordance with 4.3.2.2. 4.3.2.2 Class W2 A product failing to pass the test indicated in 5.2.3 shall be tested in accordance with 5.2.4. If the measured mean volume of water passing through the specimens tested is less than 100 ml, the product shall be classified as resistant to water penetration Class W2. SIST EN 13859-1:2005
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.