EN ISO 12156-1:2018

SLOVENSKI STANDARD
01-februar-2019
1DGRPHãþD
SIST EN ISO 12156-1:2016
'L]HOVNRJRULYR2FHQMHYDQMHPD]DOQHVSRVREQRVWL]YLVRNRIUHNYHQþQLP
PHULOQLNRP+)55GHO3UHVNXVQDPHWRGD,62
Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) -
Part 1: Test method (ISO 12156-1:2018)
Dieselkraftstoff - Bestimmung der Schmierfähigkeit unter Verwendung eines
Schwingungsverschleiß-Prüfgerätes (HFRR) - Teil 1: Prüfverfahren (ISO 12156-1:2018)
Carburant diesel - Évaluation du pouvoir lubrifiant au banc alternatif à haute fréquence
(HFRR) - Partie 1: Méthode d'essai (ISO 12156-1:2018)
Ta slovenski standard je istoveten z: EN ISO 12156-1:2018
ICS:
75.160.20 7HNRþDJRULYD Liquid fuels
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 12156-1
EUROPEAN STANDARD
NORME EUROPÉENNE
November 2018
EUROPÄISCHE NORM
ICS 75.160.20 Supersedes EN ISO 12156-1:2016
English Version
Diesel fuel - Assessment of lubricity using the high-
frequency reciprocating rig (HFRR) - Part 1: Test method
(ISO 12156-1:2018)
Carburant diesel - Évaluation du pouvoir lubrifiant au Dieselkraftstoff - Bestimmung der Schmierfähigkeit
banc alternatif à haute fréquence (HFRR) - Partie 1: unter Verwendung eines Schwingungsverschleiß-
Méthode d'essai (ISO 12156-1:2018) Prüfgerätes (HFRR) - Teil 1: Prüfverfahren (ISO 12156-
1:2018)
This European Standard was approved by CEN on 30 March 2018.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2018 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12156-1:2018 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 12156-1:2018) has been prepared by Technical Committee ISO/TC 22 "Road
vehicles" in collaboration with Technical Committee CEN/TC 19 “Gaseous and liquid fuels, lubricants
and related products of petroleum, synthetic and biological origin.” the secretariat of which is held by
NEN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by May 2019, and conflicting national standards shall be
withdrawn at the latest by May 2019.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 12156-1:2016.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
Endorsement notice
The text of ISO 12156-1:2018 has been approved by CEN as EN ISO 12156-1:2018 without any
modification.
INTERNATIONAL ISO
STANDARD 12156-1
Fourth edition
2018-10
Diesel fuel — Assessment of
lubricity using the high-frequency
reciprocating rig (HFRR) —
Part 1:
Test method
Carburant diesel — Évaluation du pouvoir lubrifiant au banc
alternatif à haute fréquence (HFRR) —
Partie 1: Méthode d'essai
Reference number
ISO 12156-1:2018(E)
©
ISO 2018
ISO 12156-1:2018(E)
© ISO 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2018 – All rights reserved

ISO 12156-1:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Principle . 2
5 Reagents and materials . 2
6 Apparatus . 3
7 Sampling . 5
8 Preparation and calibration . 6
8.1 Preparation of apparatus . 6
8.1.1 Test plates and balls . 6
8.1.2 Hardware . 6
8.2 Calibration and correction . 6
8.2.1 Temperature . 6
8.2.2 Frequency . 6
8.2.3 Stroke length . 6
8.2.4 Test duration . 6
8.2.5 Test rig performance . 6
9 Test procedure . 7
10 Measurement of wear scar . 8
10.1 General . 8
10.2 Method “A” — Digital camera . 8
10.3 Method “B” — Visual observation . 8
11 Test results . 8
12 Precision . 9
12.1 General . 9
12.2 Repeatability, r . 9
12.3 Reproducibility, R . 9
13 Test report . 9
Annex A (informative) Measurement of HFRR wear scars .11
Bibliography .14
ISO 12156-1:2018(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www .iso .org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as
...