EN 206:2013+A1:2016/FprA2
(Amendment)Concrete - Specification, performance, production and conformity
Concrete - Specification, performance, production and conformity
Beton - Festlegung, Eigenschaften, Herstellung und Konformität
Béton - Spécification, performances, production et conformité
Beton - Specifikacija, lastnosti, proizvodnja in skladnost
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 206:2013+A1:2016/oprA2:2020
01-maj-2020
Beton - Specifikacija, lastnosti, proizvodnja in skladnost
Concrete - Specification, performance, production and conformity
Beton - Festlegung, Eigenschaften, Herstellung und Konformität
Béton - Spécification, performances, production et conformité
Ta slovenski standard je istoveten z: EN 206:2013+A1:2016/prA2:2020
ICS:
91.100.30 Beton in betonski izdelki Concrete and concrete
products
SIST EN 206:2013+A1:2016/oprA2:2020 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN 206:2013+A1:2016/oprA2:2020
SIST EN 206:2013+A1:2016/oprA2:2020
DRAFT
EUROPEAN STANDARD
EN 206:2013+A1:2016
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA2
March 2020
ICS 91.100.30
English Version
Concrete - Specification, performance, production and
conformity
Béton - Spécification, performances, production et Beton - Festlegung, Eigenschaften, Herstellung und
conformité Konformität
This draft amendment is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee CEN/TC 104.
This draft amendment A2, if approved, will modify the European Standard EN 206:2013+A1:2016. If this draft becomes an
amendment, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
inclusion of this amendment into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved Ref.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.