iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 5370:2023

(Main)

Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)

Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)

This document specifies a method for determining the amount of material passing through a sieve with 3,15-mm-diameter round holes. It is intended for use in all applications (e.g. laboratories, production sites, field locations) where the measurement of fines is required.

Biogene Festbrennstoffe - Bestimmung des Feinanteils in Pellets (ISO 5370:2023)

Dieses Dokument legt ein Verfahren zur Bestimmung der Materialmenge fest, die ein Rundlochsieb mit einer Lochweite von 3,15mm Durchmesser passiert. Es ist für alle Einsatzbereiche (z.B. Laboratorien, Produktions
stätten, Feldstandorte) vorgesehen, bei denen die Messung des Feinanteils erforderlich ist.

Biocombustibles solides - Détermination de la teneur en fines des granulés (ISO 5370:2023)

Le présent document spécifie une méthode pour la détermination de la quantité de matériau passant à travers un tamis à trous ronds de 3,15 mm de diamètre. Il est destiné à être utilisé dans toutes les applications (par exemple: laboratoires, sites de production, emplacements sur le terrain) où la mesure des fines est requise.

Trdna biogoriva - Določanje vsebnosti drobnih snovi v peletih (ISO 5370:2023)

Ta mednarodni standard določa metodo za določanje količine materiala, ki gre skozi sito z okroglimi luknjami premera 3,15 mm. Namenjen je uporabi v vseh aplikacijah (npr. v laboratorijih, proizvodnih obratih, na terenu), kjer se zahteva merjenje drobnih delcev.

General Information

Status
Published
Publication Date
14-Feb-2023
ICS
27.190 - Biological sources and alternative sources of energy
75.160.40 - Biofuels
Technical Committee
CEN/TC 335 - Solid biofuels
Drafting Committee
CEN/TC 335 - Solid biofuels
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Feb-2023
Due Date
15-Apr-2023
Completion Date
15-Feb-2023
Ref Project
SIST EN ISO 5370:2023 - Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)

Buy Standard

EN ISO 5370:2023EN ISO 5370:2023
PreviousNext
Standard
EN ISO 5370:2023
English language
26 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 5370:2023
01-april-2023
Trdna biogoriva - Določanje vsebnosti drobnih snovi v peletih (ISO 5370:2023)
Solid biofuels - Determination of fines content in pellets (ISO 5370:2023)
Biogene Festbrennstoffe - Bestimmung des Gehaltes an Feingut in Pellets (ISO
5370:2023)
Biocombustibles solides - Détermination de la teneur en fines des granulés (ISO
5370:2023)
Ta slovenski standard je istoveten z: EN ISO 5370:2023
ICS:
75.160.40 Biogoriva Biofuels
SIST EN ISO 5370:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 5370:2023

---------------------- Page: 2 ----------------------
SIST EN ISO 5370:2023


EN ISO 5370
EUROPEAN STANDARD

NORME EUROPÉENNE

February 2023
EUROPÄISCHE NORM
ICS 27.190; 75.160.40
English Version

Solid biofuels - Determination of fines content in pellets
(ISO 5370:2023)
Biocombustibles solides - Détermination de la teneur Biogene Festbrennstoffe - Bestimmung des Gehaltes an
en fines des granulés (ISO 5370:2023) Feingut in Pellets (ISO 5370:2023)
This European Standard was approved by CEN on 17 December 2022.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.





EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 5370:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
SIST EN ISO 5370:2023
EN ISO 5370:2023 (E)
Contents Page
European foreword . 3

2

---------------------- Page: 4 ----------------------
SIST EN ISO 5370:2023
EN ISO 5370:2023 (E)
European foreword
This document (EN ISO 5370:2023) has been prepared by Technical Committee ISO/TC 238 "Solid
biofuels" in collaboration with Technical Committee CEN/TC 335 “Solid biofuels” the secretariat of
which is held by SIS.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by August 2023, and conflicting national standards shall
be withdrawn at the latest by August 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO 5370:2023 has been approved by CEN as EN ISO 5370:2023 without any modification.


3

---------------------- Page: 5 ----------------------
SIST EN ISO 5370:2023

---------------------- Page: 6 ----------------------
SIST EN ISO 5370:2023
INTERNATIONAL ISO
STANDARD 5370
First edition
2023-01
Solid biofuels — Determination of
fines content in pellets
Biocombustibles solides — Détermination de la teneur en fines des
granulés
Reference number
ISO 5370:2023(E)
© ISO 2023

---------------------- Pa
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 18134-2:2024(Main)
Solid biofuels - Determination of moisture content - Part 2: Simplified method (ISO 18134‑2:2024)
kSIST FprEN ISO 18134-2:2024

This document specifies a method of determining the moisture content of a test sample of solid biofuels by drying in an oven and is used when the highest precision is not needed, e.g. for routine production control on site. The method described in this document is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis).
NOTE            Biomass materials can contain small amounts of volatile organic compounds (VOC) which can evaporate when determining moisture content by oven drying (see References [1] and [2]). The release of such compounds is quite small relative to the overall moisture content as determined by this method and is disregarded in this document.

  • Draft
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18134-3:2023(Main)
Solid biofuels - Determination of moisture content - Part 3: Moisture in general analysis sample (ISO 18134-3:2023)
SIST EN ISO 18134-3:2023

This document describes the method of determining the moisture content in the general analysis sample by drying in an oven. The method described in this document is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis).
Since biofuels in small particle size are very hygroscopic, their moisture content will change with humidity in the atmosphere and, therefore, the moisture of the general analysis sample is determined simultaneously with the determination of other properties being measured (e.g. calorific value, volatile matter, metals, etc.).
NOTE       Biomass materials can contain small amounts of volatile organic compounds (VOC) which can evaporate when determining moisture content by oven drying (see References [1] and [2]). The release of such compounds is quite small relative to the overall moisture content as determined by this method and is disregarded in this document.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17225-8:2023(Main)
Solid biofuels - Fuel specifications and classes - Part 8: Graded thermally treated and densified biomass fuels for commercial and industrial use (ISO 17225-8:2023)
SIST EN ISO 17225-8:2023

This document determines the fuel quality classes and specifications of graded densified solid biofuels produced from thermally treated biomass for commercial applications and industrial use. This document covers pellets and briquettes produced from the following raw materials (see ISO 17225‑1:2021, Table 1):
—    woody biomass;
—    herbaceous biomass;
—    fruit biomass;
—    aquatic biomass;
—    blends and mixtures.
Subcategories of these raw materials are included.
This document does not consider products which are marketed as charcoal or as charcoal products. For these products, see ISO 17225‑1:2021, Table 14.
NOTE      Health, safety and environmental issues for solid biofuels are important and need special attention; however, they are outside the scope of this document.

  • Standard
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18123:2023(Main)
Solid biofuels - Determination of volatile matter (ISO 18123:2023)
SIST EN ISO 18123:2023

This document specifies the requirements and method used to determine the volatile matter of solid biofuels. It is intended for persons and organisations that manufacture, plan, sell, erect or use machinery, equipment, tools and entire plants related to solid biofuels, and for all persons and organisations involved in producing, purchasing, selling and utilizing solid biofuels.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18122:2022(Main)
Solid biofuels - Determination of ash content (ISO 18122:2022)
SIST EN ISO 18122:2023

This document specifies a method for the determination of ash content of all solid biofuels.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18134-1:2022(Main)
Solid biofuels - Determination of moisture content - Part 1: Reference method (ISO 18134-1:2022)
SIST EN ISO 18134-1:2022

This document describes the method of determining the moisture content of a test sample of solid biofuels by drying in an oven and can be used when high precision of the determination of moisture content is necessary. The method described in this document is applicable to all solid biofuels. The moisture content of solid biofuels (as received) is always reported based on the total mass of the test sample (wet basis).
NOTE       Biomass materials can contain small amounts of volatile organic compounds (VOC) which can evaporate when determining moisture content by oven drying (see References [1] and [2]). The release of such compounds is quite small relative to the overall moisture content as determined by this method and is disregarded in this document.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 20048-1:2022(Main)
Solid biofuels - Determination of off-gassing and oxygen depletion characteristics - Part 1: Laboratory method for the determination of off-gassing and oxygen depletion using closed containers (ISO/TS 20048-1:2020)
SIST-TS CEN ISO/TS 20048-1:2022

This document defines a method for determination of off-gassing (permanent gases) and oxygen depletion from woody as well as non-woody biomass, including densified materials such as pellets and briquettes, as well as non-densified materials such as chips. The method is also applicable for thermally treated materials, including torrefied and carbonized materials.
The emission and depletion factor and emission and depletion rate for various gas species emitted from sample within a closed test container is determined by means of gas chromatography.
The emission and depletion factor and emission and depletion rate provide guidance for ventilation requirements to keep gas concentrations below Permissible Exposure Levels (PEL) in spaces where workers can be exposed to the enclosed atmosphere.

  • Technical specification
    28 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN ISO/TS 20049-2:2022(Main)
Solid biofuels - Determination of self-heating of pelletized biofuels - Part 2: Basket heating tests (ISO/TS 20049-2:2020)
SIST-TS CEN ISO/TS 20049-2:2022

This document specifies basket heating tests for the characterization of self-heating properties of solid biofuel pellets.
This document includes:
a)   a compilation of basket heating test methods;
b)   guidance on the applicability and use of basket heating tests for solid biofuel pellets;
c)   information on the application of basket heating test data for calculations of critical conditions in storages.
Data on spontaneous heat generation determined using this document is only associated with the specific quality and age of the sample material.
The information derived using this document is for use in quality control and in hazard and risk assessments related to the procedures given in ISO 20024.
The described methods can be used for other substances than solid biofuel pellets (e.g. wood chips).

  • Technical specification
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 16559:2022(Main)
Solid biofuels - Vocabulary (ISO 16559:2022)
SIST EN ISO 16559:2022

This document establishes a vocabulary for solid biofuels. This document only includes raw and processed material originating from
—    forestry and arboriculture,
—    agriculture and horticulture, and
—    aquaculture.
NOTE 1   Chemically treated material cannot include halogenated organic compounds or heavy metals at levels higher than those in typical virgin material values (see also ISO 17225-1:2021, Annex B) or higher than typical values of the country of origin.
NOTE 2   Raw and processed material includes woody, herbaceous, fruit and aquatic biomass and biodegradable waste originating from above sectors.
Materials originating from different recycling processes of end-of-life-products are outside the scope of this document but relevant terms are included for information. Liquid biofuels (ISO/TC 28/SC 7), natural gas (ISO/TC 193) and solid recovered fuels (ISO/TC 300) are outside the scope of this document.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17225-6:2021(Main)
Solid biofuels - Fuel specifications and classes - Part 6: Graded non-woody pellets (ISO 17225-6:2021)
SIST EN ISO 17225-6:2021

This document determines the fuel quality classes and specifications of graded non-woody pellets. This document covers only non-woody pellets produced from the following raw material (see ISO 17225‑1:2021, Table 1):
—    2 Herbaceous biomass
—    3 Fruit biomass
—    4 Aquatic biomass
—    5 Biomass blends and mixtures
NOTE 1    Herbaceous biomass originates from plants that have a non-woody stem and which die back at the end of the growing season. It includes grains or seeds crops from food production or processing industry and their by-products such as cereals.
NOTE 2    Blends and mixtures include blends and mixtures from the main origin-based solid biofuel groups woody biomass, herbaceous biomass, fruit biomass and aquatic biomass.
Blends are intentionally mixed biofuels, whereas mixtures are unintentionally mixed biofuels. The origin of the blend and mixture is to be described using ISO 17225‑1:2021, Table 1.
If solid biofuel blend or mixture contains chemically treated material it shall be stated.
NOTE 3    Thermally treated biomass pellets (e.g. torrefied pellets) are not included in the scope of this document.

  • Standard
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day