Aerospace series - Connectors, electrical, circular, bayonet coupling, operating temperature 175 °C continuous - Part 004: Receptacle, jam-nut mounting - Product standard

This document specifies the characteristics of the jam-nut mounted receptacles of the family of bayonet coupling circular connectors, intended for use in an operating temperature range of -65 °C to 175 °C or 200 °C continuous.
This document applies to models specified in Table 4.
For contact, filler plugs and rear accessories associated with this receptacle see EN 3646-002. For plugs and protective covers, see EN 3646-008 and EN 3646-009 respectively.

Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung, Betriebstemperatur 175 °C oder 200 °C konstant - Teil 004: Fester Steckverbinder mit Mutternbefestigung - Produktnorm

Série aérospatiale - Connecteurs électriques circulaires à accouplement par baïonenettes, température d'utilisation 175 °C ou 200 °C continu - Partie 004 : Embasse à fixation par écrou - Norme de produit

Le présent document spécifie les caractéristiques des embases à fixation par écrou de la famille des connecteurs circulaires à accouplement par baïonnettes, destinés à une utilisation dans une plage de températures comprises entre −65 °C et 175 °C ou 200 °C continu.
Il s'applique aux modèles spécifiés dans le Tableau 4.
Pour les contacts, les obturateurs et les accessoires arrière associés à cette embase, voir l’EN 3646-002. Pour les fiches et les bouchons de vol, voir respectivement l’EN 3646-008 et l’EN 3646-009.

Aeronavtika - Konektorji, električni, okrogli, z bajonetnim spojem, neprekinjena delovna temperatura 175 °C - 004. del: Vtičnica, vgradnja z matico - Standard izdelka

General Information

Status
Not Published
Publication Date
21-Sep-2025
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
13-Jun-2024
Completion Date
13-Jun-2024

Relations

Buy Standard

Draft
prEN 3646-004:2024
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-junij-2024
Aeronavtika - Konektorji, električni, okrogli, z bajonetnim spojem, neprekinjena
delovna temperatura 175 °C - 004. del: Vtičnica, vgradnja z matico - Standard
izdelka
Aerospace series - Connectors, electrical, circular, bayonet coupling, operating
temperature 175 °C continuous - Part 004: Receptacle, jam-nut mounting - Product
standard
Luft- und Raumfahrt - Elektrische Rundsteckverbinder mit Bajonettkupplung,
Betriebstemperatur 175 °C oder 200 °C konstant - Teil 004: Fester Steckverbinder mit
Mutternbefestigung - Produktnorm
Série aérospatiale - Connecteurs électriques circulaires à accouplement par
baïonenettes, température d'utilisation 175 °C ou 200 °C continu - Partie 004 : Embasse
à fixation par écrou - Norme de produit
Ta slovenski standard je istoveten z: prEN 3646-004
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

DRAFT
EUROPEAN STANDARD
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2024
ICS 49.060 Will supersede EN 3646-004:2015
English Version
Aerospace series - Connectors, electrical, circular, bayonet
coupling, operating temperature 175 °C continuous - Part
004: Receptacle, jam-nut mounting - Product standard
Série aérospatiale - Connecteurs électriques circulaires Luft- und Raumfahrt - Elektrische Rundsteckverbinder
à accouplement par baïonenettes, température mit Bajonettkupplung, Betriebstemperatur 175 °C oder
d'utilisation 175 °C ou 200 °C continu - Partie 004 : 200 °C konstant - Teil 004: Fester Steckverbinder mit
Embasse à fixation par écrou - Norme de produit Mutternbefestigung - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2024 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 3646-004:2024 E
worldwide for CEN national Members.

Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Dimensions and mass . 4
4.2 Tightening torque of attachment nut . 6
4.3 Panel cut-out . 7
4.4 Material and surface treatment . 7
4.5 Main general characteristics . 7
4.6 Possible combinations of plugs and receptacles . 7
5 Designation . 8
6 Marking . 9
6.1 General. 9
6.2 Marking on the product . 9
6.3 Marking on the individual packaging . 9
7 Technical specification . 9
Bibliography . 10

European foreword
This document (prEN 3646-004:2024) has been prepared by ASD-STAN.
After enquiries and votes carried out in accordance with the rules of this Association, this document has
received the approval of the National Associations and the Official Services of the member countries of
ASD-STAN, prior to its presentation to CEN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 3646-004:2015.
This document includes the following significant technical changes with respect to EN 3646-004:2015:
— possibility to have
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.