EN 4165-024:2024
(Main)Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 024: Single module plug - Product standard
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 °C continuous - Part 024: Single module plug - Product standard
This document specifies the single module plug used in the family of rectangular electrical connectors, operating temperature 175 °C continuous. The receptacles and accessories corresponding to this plug are specified in EN 4165-002. The cavity of this connector is uncoded, so it can accept polarized modules N, A, B, C and D as specified in EN 4165-002.
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise - Betriebstemperatur 175 °C konstant - Teil 024: Freier Steckverbinder für Einzelmodul - Produktnorm
Dieses Dokument legt freie Steckverbinder für Einzelmodule fest, die in der Familie der elektrischen Rechtecksteckverbinder verwendet und bei Betriebstemperaturen von 175 °C konstant betrieben werden. Die diesem freien Steckverbinder entsprechenden festen Steckverbinder und Gehäuse sind in EN 4165 002 festgelegt. Die Modulkammer dieses Steckverbinders ist unkodiert, daher kann sie nach EN 4165 002 festgelegte kodierte Module N, A, B, C und D aufnehmen.
Série aérospatiale - Connecteurs électriques rectangulaires modulaires - Température d'utilisation 175 °C continu - Partie 024 : Fiche mono-module - Norme de produit
Le présent document spécifie les fiches mono-modules, utilisées dans la famille des connecteurs électriques rectangulaires modulaires, température d'utilisation 175 °C continu. Les embases et accessoires correspondant à ces fiches sont spécifiés dans l’EN 4165 002. La cavité de ce connecteur n'est pas codée. Ainsi, il peut accepter les modules détrompés N, A, B, C et D comme spécifié dans l'EN 4165 002.
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna temperatura 175 °C - 024. del: Enojni modulni vtič - Standard za proizvod
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN 4165-024:2022
01-februar-2022
Aeronavtika - Konektorji, električni, pravokotni, modularni - Stalna delovna
temperatura 175 °C - 024. del: Enojni modulni vtič - Standard za proizvod
Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature
175 °C continuous - Part 024: Single module plug - Product standard
Luft- und Raumfahrt - Elektrischer Rechtecksteckverbinder in modularer Bauweise -
Betriebstemperatur 175 °C konstant - Teil 024: Freier Steckverbinder für Einzelmodule -
Produktnorm
Série Aérospatiale - Connecteurs électriques rectangulaires, modulaires - Température
d'utilisation 175 °C continu - Partie 024 : Fiche mono-module - Norme de produit
Ta slovenski standard je istoveten z: prEN 4165-024
ICS:
31.220.10 Vtiči in vtičnice, konektorji Plug-and-socket devices.
Connectors
49.060 Letalska in vesoljska Aerospace electric
električna oprema in sistemi equipment and systems
oSIST prEN 4165-024:2022 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN 4165-024:2022
oSIST prEN 4165-024:2022
DRAFT
EUROPEAN STANDARD
prEN 4165-024
NORME EUROPÉENNE
EUROPÄISCHE NORM
December 2021
ICS 49.060 Will supersede EN 4165-024:2017
English Version
Aerospace series - Connectors, electrical, rectangular,
modular - Operating temperature 175 °C continuous - Part
024: Single module plug - Product standard
Série Aérospatiale - Connecteurs électriques Luft- und Raumfahrt - Elektrischer
rectangulaires, modulaires - Température d'utilisation Rechtecksteckverbinder in modularer Bauweise -
175 °C continu - Partie 024 : Fiche mono-module - Betriebstemperatur 175 °C konstant - Teil 024: Freier
Norme de produit Steckverbinder für Einzelmodule - Produktnorm
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee ASD-
STAN.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 4165-024:2021 E
worldwide for CEN national Members.
oSIST prEN 4165-024:2022
prEN 4165-024:2021 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Required characteristics . 4
4.1 Single module plug design . 4
4.2 Class . 13
5 Designation . 13
6 Marking . 14
7 Technical specification . 14
Bibliography .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.