EN 10243-1:1999/AC:2005
(Corrigendum)Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings
TC - Table 4, 3rd column, addition of "d"
Gesenkschmiedeteile aus Stahl - Maßtoleranzen - Teil 1: Warm hergestellt in Hämmern und Senkrecht-Pressen
Pièces forgées par estampage en acier - Tolérances dimensionelles - Partie 1: Pièces exécutées à chaud sur marteaux-pilons ou presses verticales
Utopno kovani jekleni izkovki - Mejni odstopki mer - 1. del: Kovani in stiskani jekleni izkovki
General Information
- Status
- Published
- Publication Date
- 01-Mar-2005
- Technical Committee
- ECISS/TC 111 - Steel castings and forgings
- Drafting Committee
- ECISS/TC 28/SC 1 - Drop forgings
- Current Stage
- 6060 - Definitive text made available (DAV) - Publishing
- Start Date
- 02-Mar-2005
- Completion Date
- 02-Mar-2005
Relations
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 10243-1:1999/AC:2005 is a amendment published by the European Committee for Standardization (CEN). Its full title is "Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings". This standard covers: TC - Table 4, 3rd column, addition of "d"
TC - Table 4, 3rd column, addition of "d"
EN 10243-1:1999/AC:2005 is classified under the following ICS (International Classification for Standards) categories: 77.140.85 - Iron and steel forgings. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 10243-1:1999/AC:2005 has the following relationships with other standards: It is inter standard links to EN 10243-1:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 10243-1:1999/AC:2005 is associated with the following European legislation: EU Directives/Regulations: 97/23/EC; Standardization Mandates: M/005, M/071. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 10243-1:1999/AC:2005 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2005
Utopno kovani jekleni izkovki - Mejni odstopki mer - 1. del: Kovani in stiskani
jekleni izkovki
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical press forgings
Gesenkschmiedeteile aus Stahl - Maßtoleranzen - Teil 1: Warm hergestellt in Hämmern
und Senkrecht-Pressen
Pieces forgées par estampage en acier - Tolérances dimensionelles - Partie 1: Pieces
exécutées a chaud sur marteaux-pilons ou presses verticales
Ta slovenski standard je istoveten z: EN 10243-1:1999/AC:2005
ICS:
77.140.85 Železni in jekleni kovani Iron and steel forgings
izdelki
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 10243-1:1999/AC
NORME EUROPÉENNE
March 2005
Mars 2005
EUROPÄISCHE NORM
März 2005
ICS 77.140.85
English version
Version Française
Deutsche Fassung
Steel die forgings - Tolerances on dimensions - Part 1: Drop and vertical
press forgings
Pièces forgées par estampage en acier - Gesenkschmiedeteile aus Stahl -
Tolérances dimensionelles - Partie 1: Maßtoleranzen - Teil 1: Warm hergestellt in
Pièces exécutées à chaud sur marteaux- Hämmern und Senkrecht-Pressen
pilons ou presses verticales
This
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...