EN ISO/IEC 19896-1:2023

SLOVENSKI STANDARD
01-maj-2023
Varnostne tehnike IT - Zahteve za usposobljenost za preskuševalce in ocenjevalce
informacijske varnosti - 1. del: Uvod, pojmi in splošne zahteve (ISO/IEC 19896-
1:2018)
IT security techniques - Competence requirements for information security testers and
evaluators - Part 1: Introduction, concepts and general requirements (ISO/IEC 19896-
1:2018)
IT-Sicherheitstechniken - Kompetenzanforderungen an Tester und Evaluatoren von
Informationssicherheit - Teil 1: Einführung, Konzepte und allgemeine Anforderungen
(ISO/IEC 19896-1:2018)
Techniques de sécurité IT - Exigences de compétence pour l'information testeurs
d'assurance et les évaluateurs - Partie 1: Introduction, concepts et exigences générales
(ISO/IEC 19896-1:2018)
Ta slovenski standard je istoveten z: EN ISO/IEC 19896-1:2023
ICS:
03.100.30 Vodenje ljudi Management of human
resources
35.030 Informacijska varnost IT Security
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN ISO/IEC 19896-1

NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2023
ICS 35.030
English version
IT security techniques - Competence requirements for
information security testers and evaluators - Part 1:
Introduction, concepts and general requirements (ISO/IEC
19896-1:2018)
Techniques de sécurité IT - Exigences de compétence IT-Sicherheitstechniken - Kompetenzanforderungen an
pour l'information testeurs d'assurance et les Tester und Evaluatoren von Informationssicherheit -
évaluateurs - Partie 1: Introduction, concepts et Teil 1: Einführung, Konzepte und allgemeine
exigences générales (ISO/IEC 19896-1:2018) Anforderungen (ISO/IEC 19896-1:2018)
This European Standard was approved by CEN on 9 January 2023.

CEN and CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for
giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
any CEN and CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN and CENELEC member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN and CENELEC members are the national standards bodies and national electrotechnical committees of Austria, Belgium,
Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia,
Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and United Kingdom.

CEN-CENELEC Management Centre:
Rue de la Science 23, B-1040 Brussels
© 2023 CEN/CENELEC All rights of exploitation in any form and by any means
Ref. No. EN ISO/IEC 19896-1:2023 E
reserved worldwide for CEN national Members and for
CENELEC Members.
Contents Page
European foreword . 3

European foreword
The text of ISO/IEC 19896-1:2018 has been prepared by Technical Committee ISO/IEC JTC 1
"Information technology” of the International Organization for Standardization (ISO) and has been
taken over as EN ISO/IEC 19896-1:2023 by Technical Committee CEN-CENELEC/ JTC 13 “Cybersecurity
and Data Protection” the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2023, and conflicting national standards shall be
withdrawn at the latest by July 2023.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN-CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national standards body.
A complete listing of these bodies can be found on the CEN and CENELEC websites.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and the
United Kingdom.
Endorsement notice
The text of ISO/IEC 19896-1:2018 has been approved by CEN-CENELEC as EN ISO/IEC 19896-1:2023
without any modification.
INTERNATIONAL ISO/IEC
STANDARD 19896-1
First edition
2018-02
IT security techniques — Competence
requirements for information security
testers and evaluators —
Part 1:
Introduction, concepts and general
requirements
Techniques de sécurité IT — Exigences de compétence pour
l'information testeurs d'assurance et les évaluateurs —
Partie 1: Introduction, concepts et exigences générales
Reference number
ISO/IEC 19896-1:2018(E)
©
ISO/IEC 2018
ISO/IEC 19896-1:2018(E)
© ISO/IEC 2018
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting
on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address
below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO/IEC 2018 – All rights reserved

ISO/IEC 19896-1:2018(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Concepts . 2
5 Elements of competence . 3
5.1 Competences . 3
5.2 Knowledge . 3
5.3 Skills . 4
5.4 Experience . 4
5.5 Education . 5
5.6 Effectiveness . 5
6 Competency levels . 5
6.1 General . 5
6.2 Level 1 (Associate) . 5
6.3 Level 2 (Professional) . 5
6.4 Level 3 (Manager) . 5
6.5 Level 4 (Principal) . 6
7 Measurement of elements of competence . 6
7.1 Knowledge . 6
7.2 Skills . 6
7.3 Experience . 6
7.4 Education . 6
7.5 Effectiveness . 7
7.6 Recording elements of competence . 7
Annex A (informative) Framework for describing competence requirements .8
Annex B (informative) Example records of experience and competence .10
Bibliography .11
© ISO/IEC 2018 – All rights reserved iii

ISO/IEC 19896-1:2018(E)
Foreword
ISO (the International Organization for Standardization) and IEC (the International Electrotechnical
Commission) form the specialized system for worldwide standardization. National bodies that are
members of ISO or IEC participate in the development of International Standards through technical
committees established by the respective organization to deal with particular fields of technical
activity. ISO and IEC technical committees collaborate in fields of mutual interest. Other international
organizations, governmental and non-governmental, in liaison with ISO and IEC, also take part in the
work. In the field of information technology, ISO and IEC have established a joint technical committee,
ISO/IEC JTC 1.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for
the different types of document should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject
of patent rights. ISO and IEC shall not be held responsible for identifying any or all such patent
rights. Details of any patent rights identified during the development of the document will be in the
Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation
...