EN 14307:2009/FprA1
(Amendment)Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification
This European Standard specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 180 °C to + 75 °C.
The products are manufactured in the form of faced or unfaced boards, pipe sections, segments and prefabricated ware.
This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.
Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered.
This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender.
Products with a declared thermal conductivity greater than 0,060 W/(m.K) at a mean temperature of 10 °C are not covered by this standard.
This standard does not cover products intended to be used for the insulation of the building structure nor for acoustical insulation.
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus extrudiertem Polystyrolschaum (XPS) - Spezifikation
Produits isolants thermiques pour l'équipement du bâtiment et les installations industrielles - Produits manufacturés en mousse de polystyrène extrudé (XPS) - Spécification
No scope available.
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije - Proizvodi iz ekstrudiranega polistirena (XPS) - Specifikacija
General Information
- Status
- Not Published
- Technical Committee
- CEN/TC 88 - Thermal insulating materials and products
- Drafting Committee
- CEN/TC 88/WG 10 - Building equipment and industrial installations
- Current Stage
- 5060 - Closure of Vote - Formal Approval
- Start Date
- 10-Oct-2012
- Due Date
- 01-Sep-2013
- Completion Date
- 10-Oct-2012
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 18-Jan-2023
- Effective Date
- 21-Dec-2011
Overview
EN 14307:2009/FprA1 is a CEN European standard that specifies requirements for factory-made extruded polystyrene (XPS) thermal insulation products intended for building equipment and industrial installations. It applies to faced or unfaced boards, pipe sections, segments and prefabricated ware used in systems with an operating temperature range of approximately -180 °C to +75 °C. The standard covers product characteristics, testing procedures, evaluation of conformity, and marking and labelling. It does not set application-specific performance levels (these are determined by regulations or tender documents), nor does it cover XPS used for structural building insulation or acoustical insulation.
Key topics and requirements
- Scope and product types: Factory-made XPS products in board, pipe, segment and prefabricated forms; faced or unfaced.
- Temperature range: Suitable for installations operating roughly between -180 °C and +75 °C.
- Thermal performance limit: Excludes products with declared thermal conductivity greater than 0.060 W/(m·K) at a mean temperature of 10 °C.
- Product characteristics and testing: Includes procedures for measuring thermal conductivity, compressive strength (noted for load-bearing applications), release of dangerous or corrosive substances, and other relevant properties. (Specific test methods referenced in the standard.)
- Conformity assessment: Defines testing, evaluation of conformity, marking and labelling requirements and assigns tasks to manufacturers and notified bodies (including initial type testing). The draft amendment explicitly adds water absorption to conformity tasks.
- Regulatory linkage: Aligns with EU requirements; manufacturers must issue a Declaration of Performance in accordance with Construction Products Regulation (EU) No 305/2011 from 1 July 2013.
Practical applications
- Insulation for building services (HVAC ducts, chilled and hot pipework), refrigeration and cryogenic installations, and industrial process pipelines where XPS thermal performance and low-temperature capability are required.
- Use in prefabricated thermal insulating systems and composite panels (note: the standard covers the XPS product performance but not the performance of complete systems).
Who uses this standard
- Manufacturers of factory-made XPS insulation products
- Test laboratories and notified bodies performing initial type testing and conformity assessment
- Specifiers, consultants and engineers specifying thermal insulation for building equipment and industrial installations
- Procurement teams and contracting authorities referencing compliance in tenders and regulatory documentation
Related standards and references
- EN 13172 (evaluation of conformity tasks) - referenced for conformity clauses
- Construction Products Regulation (EU) No 305/2011 - Declaration of Performance requirements
Keywords: EN 14307, XPS, extruded polystyrene foam, thermal insulation, factory made XPS, building equipment insulation, industrial installations, thermal conductivity, conformity assessment, marking and labelling.
Frequently Asked Questions
EN 14307:2009/FprA1 is a draft published by the European Committee for Standardization (CEN). Its full title is "Thermal insulation products for building equipment and industrial installations - Factory made extruded polystyrene foam (XPS) products - Specification". This standard covers: This European Standard specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 180 °C to + 75 °C. The products are manufactured in the form of faced or unfaced boards, pipe sections, segments and prefabricated ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,060 W/(m.K) at a mean temperature of 10 °C are not covered by this standard. This standard does not cover products intended to be used for the insulation of the building structure nor for acoustical insulation.
This European Standard specifies the requirements for factory made extruded polystyrene foam products which are used for the thermal insulation of building equipment and industrial installations with an operating temperature in the range of approximately - 180 °C to + 75 °C. The products are manufactured in the form of faced or unfaced boards, pipe sections, segments and prefabricated ware. This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling. Products covered by this standard are also used in prefabricated thermal insulating systems and composite panels; the performance of systems incorporating these products is not covered. This standard does not specify the required level of a given property that shall be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application can be found in regulations and invitations to tender. Products with a declared thermal conductivity greater than 0,060 W/(m.K) at a mean temperature of 10 °C are not covered by this standard. This standard does not cover products intended to be used for the insulation of the building structure nor for acoustical insulation.
EN 14307:2009/FprA1 is classified under the following ICS (International Classification for Standards) categories: 91.100.60 - Thermal and sound insulating materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 14307:2009/FprA1 has the following relationships with other standards: It is inter standard links to EN 14307:2009+A1:2013, EN 14307:2009. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 14307:2009/FprA1 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/103. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 14307:2009/FprA1 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
SLOVENSKI STANDARD
01-julij-2012
Toplotnoizolacijski proizvodi za opremo stavb in industrijske inštalacije -
Proizvodi iz ekstrudiranega polistirena (XPS) - Specifikacija
Thermal insulation products for building equipment and industrial installations - Factory
made extruded polystyrene foam (XPS) products - Specification
Wärmedämmstoffe für die technische Gebäudeausrüstung und für betriebstechnische
Anlagen in der Industrie - Werkmäßig hergestellte Produkte aus extrudiertem
Polystyrolschaum (XPS) - Spezifikation
Produits isolants thermiques pour l'équipement du bâtiment et les installations
industrielles - Produits manufacturés en mousse de polystyrène extrudé (XPS) -
Spécification
Ta slovenski standard je istoveten z: EN 14307:2009/FprA1
ICS:
91.100.60 0DWHULDOL]DWRSORWQRLQ Thermal and sound insulating
]YRþQRL]RODFLMR materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
FINAL DRAFT
EN 14307:2009
NORME EUROPÉENNE
EUROPÄISCHE NORM
FprA1
May 2012
ICS 91.100.60
English Version
Thermal insulation products for building equipment and industrial
installations - Factory made extruded polystyrene foam (XPS)
products - Specification
Produits isolants thermiques pour l'équipement du bâtiment Wärmedämmstoffe für die technische Gebäudeausrüstung
et les installations industrielles - Produits manufacturés en
und für betriebstechnische Anlagen in der Industrie -
mousse de polystyrène extrudé (XPS) - Spécification Werkmäßig hergestellte Produkte aus extrudiertem
Polystyrolschaum (XPS) - Spezifikation
This draft amendment is submitted to CEN members for unique acceptance procedure. It has been drawn up by the Technical Committee
CEN/TC 88.
This draft amendment A1, if approved, will modify the European Standard EN 14307:2009. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14307:2009/FprA1:2012: E
worldwide for CEN national Members.
Contents Page
Foreword .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...