EN ISO 5350-2:1998
(Main)Pulp - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp (ISO 5350-2:1998)
Pulp - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp (ISO 5350-2:1998)
This part of En ISO 5350 specifies the method for the estimation by transmitted light of dirt and shives in pulp manufactured in sheets. It does not apply to unbleached kraft pulps or to any other sheeted pulps that are too opaque to allow for the estimation of the minimum size or for minimum contrast specks to be counted in accordance with this European Standard. The maximum grammage for most pulp sheets is in the range 800 g/m2 to 1000 g/m2. Part 1 of this European Standard deals with the estimation of dirt and shives in all kinds of pulp. It is based on inspection of laboratory sheets.
Faserstoffe - Schätzung von Schmutz und Splittern - Teil 2: Prüfung von Handelszellstoff in Bogenform (ISO 5350-2:1998)
Dieser Teil der EN ISO 5350 legt die Vorgehensweise für das Durchlichtverfahren fest, das zur Schätzung von Schmutz und Splittern in in Bogenform hergestellten Faserstoffen dient. Er ist nicht für ungebleichte Kraftzellstoffe oder sonstige Faserstoffe in Bogenform anwendbar, welche zu opak sind, und deshalb eine Erfassung der Mindestgröße oder die Erfassung bei einem Mindestkontrast der Flecken, Schmutzstellen und Splittern in Übereinstimmung mit der vorliegenden Europäischen Norm nicht zulassen.
Pâtes - Estimation des impuretés et bûchettes - Partie 2: Examen des pâtes en feuilles (ISO 5350-2:1998)
La présente partie de l'EN ISO 5350 spécifie la méthode d'essai d'estimation sous lumière transmise des impuretés et bûchettes des pâtes en feuilles. Elle ne s'applique pas aux pâtes kraft non blanchies et à toute autre pâte en feuilles trop opaque pour permettre de comptabiliser des défauts de taille ou de contraste minimaux conformément à la présente norme européenne. Le grammage maximal pour la plupart des pâtes est dans la gamme 800g/m2 à 1000 g/m2. La partie 1 de la présente norme européenne traite de la détermination des impuretés et bûchettes dans toutes les sortes de pâtes.
Vlaknine - Ocenjevanje nečistoč in trsk - 2. del: Kontrola industrijsko izdelanih vlaknin v listih (ISO 5350-2:1998)
General Information
- Status
- Withdrawn
- Publication Date
- 14-Aug-1998
- Withdrawal Date
- 14-Aug-2006
- Technical Committee
- CEN/TC 172 - Pulp, paper and board
- Drafting Committee
- ISO/TC 6 - ISO/TC 6
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 15-Aug-2006
- Completion Date
- 15-Aug-2006
Relations
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
Control Union Certifications
Global certification for agriculture and sustainability.
Gozdarski inštitut Slovenije
Slovenian Forestry Institute. Forest management certification support, timber testing.
Sponsored listings
Frequently Asked Questions
EN ISO 5350-2:1998 is a standard published by the European Committee for Standardization (CEN). Its full title is "Pulp - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp (ISO 5350-2:1998)". This standard covers: This part of En ISO 5350 specifies the method for the estimation by transmitted light of dirt and shives in pulp manufactured in sheets. It does not apply to unbleached kraft pulps or to any other sheeted pulps that are too opaque to allow for the estimation of the minimum size or for minimum contrast specks to be counted in accordance with this European Standard. The maximum grammage for most pulp sheets is in the range 800 g/m2 to 1000 g/m2. Part 1 of this European Standard deals with the estimation of dirt and shives in all kinds of pulp. It is based on inspection of laboratory sheets.
This part of En ISO 5350 specifies the method for the estimation by transmitted light of dirt and shives in pulp manufactured in sheets. It does not apply to unbleached kraft pulps or to any other sheeted pulps that are too opaque to allow for the estimation of the minimum size or for minimum contrast specks to be counted in accordance with this European Standard. The maximum grammage for most pulp sheets is in the range 800 g/m2 to 1000 g/m2. Part 1 of this European Standard deals with the estimation of dirt and shives in all kinds of pulp. It is based on inspection of laboratory sheets.
EN ISO 5350-2:1998 is classified under the following ICS (International Classification for Standards) categories: 85.040 - Pulps. The ICS classification helps identify the subject area and facilitates finding related standards.
EN ISO 5350-2:1998 has the following relationships with other standards: It is inter standard links to EN ISO 5350-2:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN ISO 5350-2:1998 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Faserstoffe - Schätzung von Schmutz und Splittern - Teil 2: Prüfung von Handelszellstoff in Bogenform (ISO 5350-2:1998)Pâtes - Estimation des impuretés et buchettes - Partie 2: Examen des pâtes en feuilles (ISO 5350-2:1998)Pulp - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp (ISO 5350-2:1998)85.040Vlaknin
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...