iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1937:1999

(Main)

Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures

Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures

This European Standard specifies the procedure for mixing hydraulic setting smoothing and/or levelling compounds with water and/or a liquid component as supplied by the manufacturer.

Prüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - Standardmischverfahren

Diese Europäische Norm legt das Standardverfahren zum Mischen von Boden-Spachtelmassen mit Wasser und/oder einer vom Hersteller bereitgestellten flüssigen Komponente fest.

Méthode d'essai pour les mortiers de lissage et/ou de nivellement à prise hydraulique - Préparation des mélanges

La présente Norme européenne spécifie la méthode pour mélanger les mortiers de lissage et de nivellement à prise hydraulique avec de l'eau et/ou un composant liquide fourni par le fabricant d'adhésif.

Preskusna metoda za talne izravnalne in/ali livelirne mase za hidravlično nanašanje - Standardni postopki mešanja

General Information

Status
Published
Publication Date
21-Sep-1999
Withdrawal Date
30-Mar-2000
ICS
91.100.99 - Other construction materials
Technical Committee
CEN/TC 193 - Adhesives
Drafting Committee
CEN/TC 193/WG 4 - Building adhesives
Current Stage
Ref Project
SIST EN 1937:2000 - Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures

Buy Standard

EN 1937:2000EN 1937:2000
PreviousNext
Standard
EN 1937:2000
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.UDYOLþQRPrüfverfahren für hydraulisch erhärtende Boden-Spachtelmassen - StandardmischverfahrenMéthode d'essai pour les mortiers de lissage et/ou de nivellement a prise hydraulique - Préparation des mélangesTest method for hydraulic setting floor smoothing and/or levelling comp
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 13872:2004(Main)
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of dimensional change
SIST EN 13872:2004

This European Standard specifies the measurement of dimensional change of a hydraulic setting smoothing and/or levelling compound which is referred to in the following as "smoothing and/or levelling compound".

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13409:2002(Main)
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of setting time
SIST EN 13409:2002

This European Standard specifies the measurement of setting time of a hydraulic setting smoothing and/or levelling compound which is referred to as "smoothing and/or levelling compound", after mixing.

  • Standard
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13408:2002(Main)
Methods of test for hydraulic setting floor smoothing and/or levelling compounds - Determination of bond strength
SIST EN 13408:2002

This European Standard specifies a test method for the determination of bond strength between a cured hydraulic setting smoothing and/or levelling com-pound which is referred to as "smoothing and/or levelling compound", and a standard substrate.

  • Standard
    6 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12706:1999(Main)
Adhesives - Test methods for hydraulic setting floor smoothing and/or levelling compounds - Determination of flow characteristics
SIST EN 12706:2000

This European Standard specifies a test method to assess the flow characteristics of a hydraulic setting floor smoothing and/or levelling compounds. Hydraulic setting floor smoothing and/or levelling compounds are referred to as "smoothing and/or levelling compound" when mixed with water and/or mixing liquid according to the manufacturers' instructions.

  • Standard
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1279-2:2018(Main)
Glass in building - Insulating glass units - Part 2: Long term test method and requirements for moisture penetration
SIST EN 1279-2:2018

This document describes the test method for the determination of moisture penetration index and specifies the requirements for limit values for insulating glass units made
a)   in accordance with EN 1279 1:2018 and manufactured to EN 1279 6:2018; or
b)   for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6.

  • Standard
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16566:2014(Main)
Paints and varnishes - Fillers for internal and/or external works - Adaptation of fillers to European standards
SIST EN 16566:2014

This European Standard defines coating materials designed to cover all backgrounds and substrates in traditional materials or compliant with the standards in force, whether new or existing, bare or coated, absorbent or non-absorbent, smooth or rough, in order to prepare them to receive a paint or related system, or a bonded cover, whether specific or not. More generally intended to improve the surface appearance, they can also:
-   not be over-coated;
-   create a textured appearance or not;
-   be treated/coloured or not (pigments, wax, etc.).
Exterior fillers are not intended as top coat.
Interior coating materials with grain size over 1 mm are not covered by this European Standard.
Fillers specifically intended for wooden and metal substrates are not covered by this European Standard.
This European Standard complies with the general system for classification of water-borne coating materials and coating systems for interior walls and ceilings described in EN 13300.
This European Standard complies with the general system for the description of coating materials and coating systems for exterior masonry and concrete described in EN 1062 1.
The essential function of fillers is therefore a decorative function. Therefore, these fillers are considered here as preparatory and/or decorative fillers, of smooth or textured appearance.
NOTE   Nothing prevents preparatory surface filler from being coated with a paint system comprising protective functions.
However, they are not suitable for truing of backgrounds, without specifications regarding the verticality, angularity or flatness under a 2-m straight edge, or thickness. Their application never requires, to ensure they bond correctly, the prior application of a rigid reinforcement such as a lathwork or wire mesh, or a spatter-dash or bagging or scoring of the surface between two coats. They may nevertheless incorporate a flexible reinforcement (strip of natural or synthetic fabric) for example along joints between different or same materials, in order to limit visible cracking.
Under these conditions, this European Standard does not concern products covered by the following standards: EN 998 1, EN 998 2, EN 15824, EN 13279 1, EN 13963, EN 12860, EN 13813, EN ISO 11600.

  • Standard
    14 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 824:2013(Main)
Thermal insulating products for building applications - Determination of squareness
SIST EN 824:2013

This European Standard specifies the equipment and procedure for determining the deviation from squareness for length, width and/or thickness of full-size products. It is applicable to thermal insulating products. The method is normally applicable to products with straight edges. For products of other shape, e.g. profiled edges, the method can be adapted accordingly.

  • Standard
    9 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12089:2013(Main)
Thermal insulating products for building applications - Determination of bending behaviour
SIST EN 12089:2013

This European Standard specifies the equipment and procedures for determining the bending behaviour of full size products (Method A) and test specimens (Method B) under the action of three-point loading. It is applicable to thermal insulating products.
The test is designed to determine the bending strength of products and their deflection at a given load.
The method can be used to determine the resistance of the product to bending stresses during transport and application.

  • Standard
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Standard
    11 pages
    German language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12090:2013(Main)
Thermal insulating products for building applications - Determination of shear behaviour
SIST EN 12090:2013

This European Standard specifies the equipment and procedures for determining shear behaviour. It is applicable to thermal insulating products.
NOTE   The tests described in this standard do not determine pure shear behaviour, but measure the effects of applying two opposite parallel forces to the major faces of the test specimen. The test is however called shear in this text by convention. The application of a force tangentially to the major surface of the test specimen is considered to represent more closely the stresses imposed upon thermal insulation products in many building applications, particularly walls, than other methods of measuring shear performance e.g. bending tests.

  • Standard
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12430:2013(Main)
Thermal insulating products for building applications - Determination of behaviour under point load
SIST EN 12430:2013

This European Standard specifies equipment and procedures for determining the behaviour of products under a force applied to a small area of a test specimen at a given speed. It is applicable to thermal insulating products.
This European Standard can be used to determine whether the products have sufficient strength to withstand forces applied directly to them either during installation or during application, mainly caused by pedestrian traffic.
NOTE   The test methods given in the main body of the standard and in Annex A are reported and interpreted in different ways. The similarities that exist between the methods are not sufficient to permit reasonable comparisons to be made.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day