91.100.99 - Other construction materials
Other construction materials
Weitere Baustoffe
Autres materiaux de construction
Drugi gradbeni materiali
General Information
This document describes the test method for the determination of moisture penetration index and specifies the requirements for limit values for insulating glass units made
a) in accordance with EN 1279 1:2018 and manufactured to EN 1279 6:2018; or
b) for the purpose to demonstrate that components (e.g. edge seals or spacers) will allow the insulating glass unit to conform to the requirements given in EN 1279 1:2018, Clause 6.
- Standard16 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies requirements for adhesives intended for use in the creation and general assembly of load-bearing, structural elements used in civil engineering works and the construction of buildings. Other than the exceptions stated, it embraces all combinations of bonded materials, used to create or repair load-bearing elements.
It covers individual adhesives and special purpose kits comprising various combinations of adhesive types and components.
It includes test methods a...view more
- Draft24 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard24 pagesEnglish language
sale 10% off- e-Library read for1 day
EN 16566 defines coating materials designed to cover all backgrounds and substrates in traditional materials or compliant with the standards in force, whether new or existing, bare or coated, absorbent or non-absorbent, smooth or rough, in order to prepare them to receive a paint or related system, or a bonded cover, whether specific or not. More generally intended to improve the surface appearance, they can also: - not be over-coated; - create a textured appearance or not; - be treated/coloured...view more
- Draft13 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard14 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard defines coating materials designed to cover all backgrounds and substrates in traditional materials or compliant with the standards in force, whether new or existing, bare or coated, absorbent or non-absorbent, smooth or rough, in order to prepare them to receive a paint or related system, or a bonded cover, whether specific or not. More generally intended to improve the surface appearance, they can also:
- not be over-coated;
- create a textured appearance or not;
- be...view more
- Draft13 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard14 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the equipment and procedure for determining the deviation from squareness for length, width and/or thickness of full-size products. It is applicable to thermal insulating products. The method is normally applicable to products with straight edges. For products of other shape, e.g. profiled edges, the method can be adapted accordingly.
- Draft9 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard9 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the equipment and procedures for determining shear behaviour. It is applicable to thermal insulating products.
NOTE The tests described in this standard do not determine pure shear behaviour, but measure the effects of applying two opposite parallel forces to the major faces of the test specimen. The test is however called shear in this text by convention. The application of a force tangentially to the major surface of the test specimen is considered to represen...view more
- Standard13 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft12 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the equipment and procedures for determining the thickness of thermal insulating products for impact sound insulation in floating floor applications.
- Standard9 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the equipment and procedures for determining the water vapour transmission rate, water vapour permeance and water vapour permeability of test specimens in the steady state under different sets of specified test conditions. It is applicable to thermal insulating products.
It is intended to be used for homogeneous materials and for products which may contain integral skins or facings of different material(s).
A material is considered to be homogeneous, with regar...view more
- Draft17 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard17 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies equipment and procedures for determining the behaviour of products under a force applied to a small area of a test specimen at a given speed. It is applicable to thermal insulating products.
This European Standard can be used to determine whether the products have sufficient strength to withstand forces applied directly to them either during installation or during application, mainly caused by pedestrian traffic.
NOTE The test methods given in the main body of ...view more
- Draft13 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard12 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the characteristics and choice of measuring equipment and the procedure for determining the linear dimensions of test specimens which are taken from thermal insulating products. The procedures for measuring the dimensions of full size products are specified in EN 822 and EN 823.
- Draft9 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard9 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the equipment and procedures for determining the deviation from flatness for full-size products. It is applicable to thermal insulating products.
- Draft8 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard8 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the equipment and procedures for determining the bending behaviour of full size products (Method A) and test specimens (Method B) under the action of three-point loading. It is applicable to thermal insulating products.
The test is designed to determine the bending strength of products and their deflection at a given load.
The method can be used to determine the resistance of the product to bending stresses during transport and application.
- Standard11 pagesGerman language
sale 10% off- e-Library read for1 day
- Standard11 pagesEnglish language
sale 10% off- e-Library read for1 day
- Draft11 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the equipment and procedures for determining the effect of successive cycling from dry conditions at -20 °C to wet conditions at 20 °C on the mechanical properties and moisture content of the product. It is applicable to thermal insulating products.
It is intended to simulate freeze-thaw effects on thermal insulating products which are frequently exposed to water and low temperature conditions, e.g. inverted roofs and unprotected ground insulation.
This test me...view more
- Draft11 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard10 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the equipment and procedures for determining the thickness of full-size products. It is applicable to thermal insulating products.
- Standard13 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard13 pagesGerman language
sale 10% off- e-Library read for1 day
- Draft12 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the equipment and procedures for determining the length and width of full-size products. It is applicable to thermal insulating products.
- Draft7 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard8 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the equipment and procedures to be used when determining the compression behaviour of test specimens. It is applicable to thermal insulating products and can be used to determine the compressive stress in compressive creep tests and for applications in which insulation products are only exposed to short-term loads.
The method can be used for quality control purposes. It may also be employed to obtain reference values from which design values can be calculated us...view more
- Standard13 pagesEnglish language
sale 10% off- e-Library read for1 day
- Standard14 pagesGerman language
sale 10% off- e-Library read for1 day
- Draft13 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the measurement of dimensional change of a hydraulic setting smoothing and/or levelling compound which is referred to in the following as "smoothing and/or levelling compound".
- Standard14 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies the measurement of dimensional change of a hydraulic setting smoothing and/or levelling compound which is referred to in the following as "smoothing and/or levelling compound".
- Standard14 pagesEnglish language
sale 10% off- e-Library read for1 day
This standard describes procedures of evaluation of sample data by means of a two-parameter WEIBULL distribution function.
- Standard33 pagesEnglish language
sale 10% off- e-Library read for1 day
This European Standard specifies a test method to evaluate the effect of hydrophobic impregnation on the drying rate coefficient of impregnated specimens. The method primarily relates to the protection of concrete structures.
- Standard10 pagesEnglish language
sale 10% off- e-Library read for1 day