EN ISO 8611-1:2012

SLOVENSKI STANDARD
01-februar-2013
1DGRPHãþD
SIST EN ISO 8611-1:2004
Palete za ravnanje z materiali - Ravne palete - 1. del: Preskusne metode (ISO 8611-
1:2011)
Pallets for materials handling - Flat pallets - Part 1: Test methods (ISO 8611-1:2011)
Paletten für den Gütertransport - Flachpaletten - Teil 1: Prüfverfahren (ISO 8611-1:2011)
Palettes pour la manutention - Palettes plates - Partie 1: Méthodes d'essai (ISO 8611-
1:2011)
Ta slovenski standard je istoveten z: EN ISO 8611-1:2012
ICS:
55.180.20 9HþQDPHQVNHSDOHWH General purpose pallets
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 8611-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2012
ICS 55.180.20 Supersedes EN ISO 8611-1:2004
English Version
Pallets for materials handling - Flat pallets - Part 1: Test
methods (ISO 8611-1:2011)
Palettes pour la manutention - Palettes plates - Partie 1: Paletten für den Gütertransport - Flachpaletten - Teil 1:
Méthodes d'essai (ISO 8611-1:2011) Prüfverfahren (ISO 8611-1:2011)
This European Standard was approved by CEN on 13 July 2012.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8611-1:2012: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 8611-1:2011 has been prepared by Technical Committee ISO/TC 51 “Pallets for unit load
methods of materials handling” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 8611-1:2012 by Technical Committee CEN/TC 261 “Packaging” the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by February 2013, and conflicting national standards shall be withdrawn
at the latest by February 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 8611-1:2004.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
Endorsement notice
The text of ISO 8611-1:2011 has been approved by CEN as a EN ISO 8611-1:2012 without any modification.

INTERNATIONAL ISO
STANDARD 8611-1
Second edition
2011-05-15
Pallets for materials handling —
Flat pallets —
Part 1:
Test methods
Palettes pour la manutention — Palettes plates —
Partie 1: Méthodes d'essai
Reference number
ISO 8611-1:2011(E)
©
ISO 2011
ISO 8611-1:2011(E)
©  ISO 2011
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2011 – All rights reserved

ISO 8611-1:2011(E)
Contents Page
Foreword .iv
Introduction.v
1 Scope.1
2 Normative references.1
3 Terms and definitions .2
4 Measurements .3
5 Precision and accuracy of tests and apparatus.4
6 Test load.4
7 List of tests .4
8 Tests .4
8.1 Test 1 — Bending tests.4
8.2 Test 2 — Forklifting tests.7
8.3 Test 3 — Compression tests for blocks or stringers.9
8.4 Test 4 — Stacking test .11
8.5 Test 5 — Bottom deck bending tests .12
8.6 Test 6 — Wing pallet bending tests.14
8.7 Test 7 — Airbag bending tests.16
8.8 Test 8 — Static shear test.18
8.9 Test 9 — Corner drop test .19
8.10 Test 10 — Shear impact tests .20
8.11 Test 11 — Top deck edge impact test .22
8.12 Test 12 — Block impact test.24
8.13 Test 13 — Static coefficient of friction test.26
8.14 Test 14 — Slip angle test .26
9 Test report.27
9.1 General information — All materials .27
9.2 Information for wooden and wood-based composite pallets .28
9.3 Information for plastics pallets .28
9.4 Information for pallets made of other materials.28
Bibliography.29

ISO 8611-1:2011(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 8611-1 was prepared by Technical Committee ISO/TC 51, Pallets for unit load method of materials
handling.
This second edition cancels and replaces the first edition (ISO 8611-1:2004), which has been technically
revised.
ISO 8611 consists of the following parts, under the general title Pallets for materials handling — Flat pallets:
⎯ Part 1: Test methods
⎯ Part 2: Performance requirements and selection of tests
⎯ Part 3: Maximum working loads
iv © ISO 2011 – All rights reserved

ISO 8611-1:2011(E)
Introduction
The forces to which pallets are exposed during use vary significantly. The test procedures described in this
part of ISO 8611 are approximate simulations of pallet use. These tests help the pallet designer to establish
an initial acceptable balance between the cost and the performance of a pallet design. It is intended that all
results of tests performed using this protocol be confirmed and verified using field trials before publication of
performance or the commercial implementation of a new pallet design.
The nominal load, determined according to this test protocol, does not represent a payload and cannot be
verified using field trials. The nominal load is a minimum payload level for use in determining maximum
working load according to the procedures in ISO 8611-3. The maximum working load can be verified for a
specified payload and intended use, using field trials. It is intended that the publication of the maximum
working load include a description of the payload and the intended modes of use of the pallet.
It is essential to exercise care when comparing the results of tests with historic experience using existing
pallet designs. User expectations of pallet performance vary. Some require greater and some accept lower
levels of performance. Users are accepting different levels of risk when using pallets. Because of the varied
performance expectations of pallet users, the results of tests might not always reflect the user's perception of
pallet performance in use.
The nominal load might not reflect users' perception of pallet performance because the nominal load does not
represent a payload. It is intended that maximum working loads be used to compare with the historic
performance of existing pallet designs.
Regarding the use of the ISO 8611 series,
⎯ this part of ISO 8611 describes the test methods,
⎯ ISO 8611-2 describes the performance requirements and selection of tests, and
⎯ ISO 8611-3 describes tests for determining maximum working loads for known payloads.
This part of ISO 8611 and ISO 8611-2 are required for determining nominal load. The nominal load is the
lowest safe load value for the specified support conditions, independent of the type of load (excluding
concentrated loads).
This part of ISO 8611, ISO 8611-2 and ISO 8611-3 are required for determining maximum working loads for
known payloads.
The nominal load for the intended use is established by the selection of tests in this part of ISO 8611 and the
performance requirement is established from criteria in ISO 8611-2.
The following three typ
...