55.180.20 - General purpose pallets

MINOR AMENDMENT      MINOR AMENDMENT       MINOR AMENDMENT       MINOR AMENDMENT

MINOR AMENDMENT      MINOR AMENDMENT       MINOR AMENDMENT       MINOR AMENDMENT

This International Standard specifies the maximum defects and damage allowed before a flat wooden
pallet shall be repaired, and defines the minimum repair criteria that shall be used.
This International Standard is applicable to wooden flat pallets repaired with wood based components.
NOTE The maximum allowed defects and damage for pallets are described in this International Standard
and the Annexes A to D show examples of defects and damage which make the widely used pallets unacceptable
f...view more

ISO 18613:2014 specifies the maximum defects and damage allowed before a flat wooden pallet shall be repaired, and defines the minimum repair criteria that shall be used.
ISO 18613:2014 is applicable to wooden flat pallets repaired with wood based components.

ISO 18613:2014 specifies the maximum defects and damage allowed before a flat wooden pallet shall be repaired, and defines the minimum repair criteria that shall be used. ISO 18613:2014 is applicable to wooden flat pallets repaired with wood based components.

ISO 18333:2014 gives guidance on minimum recommended timber quality characteristics. It is applicable to new stringers, stringerboards, blocks, and deckboards used for flat wooden pallet assembly. ISO 18333:2014 does not address the phytosanitation and safety problems, if any, associated with the use of these components.

ISO 8611-4:2013 presents a procedure for predicting creep responses in stiffness tests for plastic pallets to shorten the test period. Based on regression analyses, deflections during full load and relaxation periods are predicted. ISO 8611-4:2013 is for use with the static stiffness tests such as tests 1b, 3b, 4b, 5b, and 7b referred to in ISO 8611-1:2011, and is for application at ambient temperature only.

This International Standard defines terms relating to pallets for unit load methods of materials handling. It also includes informative annexes listing terms relating to unit load handling and slipsheets.

ISO 445:2013 defines terms relating to pallets for unit load methods of materials handling.
It also includes informative annexes listing terms relating to unit load handling and slipsheets.

This part of ISO 8611 specifies the determination of maximum working load for new flat pallets with known payloads in different handling environments. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

This part of ISO 8611 specifies the performance requirements to establish nominal loads for new flat pallets. It also specifies the tests required for new flat pallets in various handling environments and the performance requirements for tests with payloads. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

This part of ISO 8611 specifies the test methods available for evaluating new flat pallets for materials handling. The test methods are split into groups for: nominal load testing; maximum working load testing; durability comparison testing. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet. NOTE Specific tests for determining load capacity do...view more

ISO 8611-2:2011 specifies the performance requirements to establish nominal loads for new flat pallets.
It also specifies the tests required for new flat pallets in various handling environments and the performance requirements for tests with payloads. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

ISO 8611-3:2011 specifies the determination of maximum working load for new flat pallets with known payloads in different handling environments.
It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

ISO 8611-1:2011 specifies the test methods available for evaluating new flat pallets for materials handling.
The test methods are split into groups for nominal load testing, maximum working load testing and durability comparison testing.
It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

ISO 13194:2011 specifies the definitions, principal requirements and test methods for box pallets of all materials. It applies to box pallets, including post pallets and cage pallets, but is not intended to apply to tank and silo pallets as defined in ISO 445. It also applies to box pallets which can be stacked and handled by forklift trucks or pallet trucks, but excludes other lifting devices. ISO 13194:2011 addresses the performance of the box pallet only, and not its contents.

ISO 8611-1:2011 specifies the test methods available for evaluating new flat pallets for materials handling. The test methods are split into groups for nominal load testing, maximum working load testing and durability comparison testing. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

ISO 8611-3:2011 specifies the determination of maximum working load for new flat pallets with known payloads in different handling environments. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.

ISO 8611-2:2011 specifies the performance requirements to establish nominal loads for new flat pallets. It also specifies the tests required for new flat pallets in various handling environments and the performance requirements for tests with payloads. It is not intended to apply to pallets with a fixed superstructure or a rigid, self-supporting container that can be mechanically attached to the pallet and which contributes to the strength of the pallet.