Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests (ISO 8611-2:2011/Amd 1:2016)

MINOR AMENDMENT      MINOR AMENDMENT       MINOR AMENDMENT       MINOR AMENDMENT

Paletten für den Gütertransport - Flachpaletten - Teil 2: Leistungsanforderungen und Auswahl von Prüfungen (ISO 8611-2:2011/Amd 1:2016)

Palettes pour la manutention - Palettes plates - Partie 2: Exigences de performance et sélection des essais (ISO 8611-2:2011/Amd 1:2016)

Palete za ravnanje z materiali - Ravne palete - 2. del: Izvedbene zahteve in izbira preskusov - Dopolnilo A1 (ISO 8611-2:2011/Amd 1:2016)

General Information

Status
Withdrawn
Publication Date
05-Apr-2016
Withdrawal Date
11-Jan-2022
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
12-Jan-2022

Relations

Buy Standard

Amendment
EN ISO 8611-2:2013/A1:2017
English language
7 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-2017
Palete za ravnanje z materiali - Ravne palete - 2. del: Izvedbene zahteve in izbira
preskusov - Dopolnilo A1 (ISO 8611-2:2011/Amd 1:2016)
Pallets for materials handling - Flat pallets - Part 2: Performance requirements and
selection of tests (ISO 8611-2:2011/Amd 1:2016)
Paletten für den Gütertransport - Flachpaletten - Teil 2: Leistungsanforderungen und
Auswahl von Prüfungen (ISO 8611-2:2011/Amd 1:2016)
Palettes pour la manutention - Palettes plates - Partie 2: Exigences de performance et
sélection des essais (ISO 8611-2:2011/Amd 1:2016)
Ta slovenski standard je istoveten z: EN ISO 8611-2:2012/A1:2016
ICS:
55.180.20 9HþQDPHQVNHSDOHWH General purpose pallets
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 8611-2:2012/A1
EUROPEAN STANDARD
NORME EUROPÉENNE
April 2016
EUROPÄISCHE NORM
ICS 55.180.20
English Version
Pallets for materials handling - Flat pallets - Part 2:
Performance requirements and selection of tests (ISO
8611-2:2011/Amd 1:2016)
Palettes pour la manutention - Palettes plates - Partie Paletten für den Gütertransport - Flachpaletten - Teil 2:
2: Exigences de performance et sélection des essais Leistungsanforderungen und Auswahl von Prüfungen
(ISO 8611-2:2011/Amd 1:2016) (ISO 8611-2:2011/Amd 1:2016)
This amendment A1 modifies the European Standard EN ISO 8611-2:2012; it was approved by CEN on 11 March 2016.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of
this amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2016 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 8611-2:2012/A1:2016 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 8611-2:2012/A1:2016) has been prepared by Technical Committee ISO/TC 51
“Pallets for unit load method of materials handling" in collaboration with Technical Committee CEN/TC
261 “Packaging", the secretariat of which is held by AFNOR.
This Amendment to the European Standard EN ISO 8611-2:2012 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by October 2016,
and conflicting national standards shall be withdrawn at the latest by October 2016.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent
rights.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia,
Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and t
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.