EN 22875:1992

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Embalaža - Celovita, napolnjena transportna embalaža - Preskus z vodnim curkom (ISO 2875:1985)Verpackung - Versandfertige Packstücke - Sprühwasserprüfung (ISO 2875:1985)Emballages - Emballages d'expédition complets et pleins - Essai de résistance aux projections d'eau (ISO 2875:1985)Packaging - Complete, filled transport packages - Water spray test (ISO 2875:1985)55.180.40Celovita, napolnjena transportna embalažaComplete, filled transport packagesICS:Ta slovenski standard je istoveten z:EN 22875:1992SIST EN 22875:1996en01-avgust-1996SIST EN 22875:1996SLOVENSKI
STANDARDSIST ISO 2875:19961DGRPHãþD

w - 3 m International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEX,lJYHAPOAHAR OPrAHM3ALWlR fl0 CTAH,!JAPTbl3A~MM.ORGANISATlON INTERNATIONALE DE NORMALISATION Packaging - Complete, filled transport packages - Water Spray test Emballages - Embaffages d’expedition complets et pleins - Essai de rt%istance aux projections d’eau Second edition - 1985-11-15 UDC 621.798.1 : 620365.7 Ref. No. ISO 28754985 (E) Descriptors : packing, transport packing, complete- and filled packages, tests, water resistance tests, spraying . 0 v) Price based on 2 pages SIST EN 22875:1996

Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bedies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 2875 was prepared by Technical Committee ISO/TC 122, Packaging. ISO 2875 was first published in 1973. This second edition cancels and replaces the first edition, which has been technically revised as follows: - - a new clause on “Package preparation” has been added; a new sub-clause (8.3) has been added to the “Procedure”. Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its Jatest edition, unless otherwise stated. 0 International Organkation for Standardkation, 1985 Printed in Switzerland SIST EN 22875:1996

INTERNATIONAL STANDARD ISO 28754985 (E) Packaging - Complete, filled transport packages - Water Spray test 1 Scope and field of application This International Standard specifies a method for testing the resistance of a package to water Spray or the protection it gives to its contents from water Spray. lt may also be used to precon- dition a package Prior to other tests, to investigate reduction in strength caused by exposure to liquid water. The test shall be performed on the package as prepared for transport and may form patt of a test sequence. 2 Reference ISO 2233, Packaging - Complete, filled transport packages - Conditioning for testing. 3 Principle Placing of the test package in a test area and spraying with water for a specified period at constant temperature. 4 Apparatus 4.1 Test area, insulated and heated, when necessary, to allow temperature to be controlled, fitted with a floor grating and an outlet of sufficient capacity to drain off the water as it
...