EN ISO 9713:2022

SLOVENSKI STANDARD
01-junij-2022
Nadomešča:
SIST EN ISO 9713:2009
Nevrokirurški vsadki (implantati) - Samozapiralne sponke za uporabo pri
intrakranialnih anevrizmah (ISO 9713:2022)
Neurosurgical implants - Self-closing intracranial aneurysm clips (ISO 9713:2022)
Neurochirurgische Implantate - Selbstschließende intrakranielle Aneurysmen-Clips (ISO
9713:2022)
Implants neurochirurgicaux - Clips intracrâniens pour anévrisme à autofermeture (ISO
9713:2022)
Ta slovenski standard je istoveten z: EN ISO 9713:2022
ICS:
11.040.40 Implantanti za kirurgijo, Implants for surgery,
protetiko in ortetiko prosthetics and orthotics
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EN ISO 9713
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2022
EUROPÄISCHE NORM
ICS 11.040.40 Supersedes EN ISO 9713:2009
English Version
Neurosurgical implants - Self-closing intracranial
aneurysm clips (ISO 9713:2022)
Implants neurochirurgicaux - Clips intracrâniens pour Neurochirurgische Implantate - Selbstschließende
anévrisme à autofermeture (ISO 9713:2022) intrakranielle Aneurysmen-Clips (ISO 9713:2022)
This European Standard was approved by CEN on 12 December 2021.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references
concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by
translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management
Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9713:2022 E
worldwide for CEN national Members.

Contents Page
European foreword . 3

European foreword
This document (EN ISO 9713:2022) has been prepared by Technical Committee ISO/TC 150 "Implants
for surgery" in collaboration with Technical Committee CEN/TC 285 “Non-active surgical implants” the
secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by July 2022, and conflicting national standards shall be
withdrawn at the latest by July 2022.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN ISO 9713:2009.
Any feedback and questions on this document should be directed to the users’ national standards
body/national committee. A complete listing of these bodies can be found on the CEN website.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,
Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,
Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of
North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the
United Kingdom.
Endorsement notice
The text of ISO 9713:2022 has been approved by CEN as EN ISO 9713:2022 without any modification.

INTERNATIONAL ISO
STANDARD 9713
Third edition
2022-01
Neurosurgical implants — Self-closing
intracranial aneurysm clips
Implants neurochirurgicaux — Clips intracrâniens pour anévrisme à
autofermeture
Reference number
ISO 9713:2022(E)
ISO 9713:2022(E)
© ISO 2022
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii
ISO 9713:2022(E)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
4 Description of aneurysm clips . 2
4.1 Mechanism of action . 2
4.2 Geometry . 2
4.3 Blade closing surface . 2
5 Indication of dimensions . 3
6 Materials . 3
7 MRI safety assessment . 5
8 Design requirements .5
8.1 Closing force. 5
8.1.1 Measurement of actual closing force of clips . 5
8.1.2 Tolerance on nominal closing force . 6
8.1.3 Reduction of closing force . 6
8.2 V erification of blade surface . 6
8.3 A ssessment of maximum blade opening . 6
9 Supplying condition and sterilization . 6
10 Packaging. 6
11 Information supplied by the manufacturer . 7
11.1 General . 7
11.2 Implant processing by user . 7
11.3 Label . 7
11.4 Instructions for use . 7
11.5 Information for the patient . 7
11.5.1 General . 7
11.5.2 Patient record label . 8
11.5.3 Patient card . 8
Bibliography . 9
iii
ISO 9713:2022(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out
through ISO technical committees. Each member body interested in a subject for which a technical
committee has been established has the right to be represented on that committee. International
organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of
electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are
described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the
different types of ISO documents should be noted. This document was drafted in accordance with the
editorial rules of the ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of
any patent rights identified during the development of the document will be in the Introduction and/or
on the ISO list of patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 150, Implants for surgery, in collaboration
with the European Committee for Standardization (CEN) Technical Committee CEN/TC 285, Non-active
surgical implants, in accordance with the Agreement on technical cooperation between ISO and CEN
(Vienna Agreement).
This third edition cancels and replaces the second edition (ISO 9713:2002), which has been technically
revised.
The main changes compared to the previous edition are as follows:
— the terms and definitions in Clause 3 have been revised to more accurately define the information
con
...