EN ISO 16000-9:2006/AC:2007 - Indoor air - Part 9: Determination of

Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006/Cor 1:2007)

ISO - Taking over of an ISO Technical Corrigendum

Innenraumluftverunreinigungen - Teil 9: Bestimmung der Emission von flüchtigen organischen Verbindungen aus Bauprodukten und Einrichtungsgegenständen - Emissionsprüfkammer-Verfahren (ISO 16000-9:2006/Cor 1:2007)

Air intérieur - Partie 9: Dosage de l'émission de composés organiques volatils de produits de construction et d'objets d'équipement - Méthode de la chambre d'essai d'émission (ISO 16000-9:2006/Cor 1:2007)

Notranji zrak - 9. del: Določevanje emisije hlapnih organskih spojin iz gradbenih proizvodov in opreme - Metoda s preskusno komoro - Popravek AC (ISO 16000-9:2006/Cor 1:2007)

General Information

Status: Withdrawn
Publication Date: 04-Dec-2007
Withdrawal Date: 13-Apr-2025

ICS: 13.040.20 - Ambient atmospheres

Technical Committee: CEN/TC 264 - Air quality
Drafting Committee: CEN/TC 264/WG 7 - Building materials - Determination of volatile compounds - Emission test chamber methods

Current Stage: 9960 - Withdrawal effective - Withdrawal
Start Date: 27-Mar-2024
Completion Date: 14-Apr-2025

Ref Project: SIST EN ISO 16000-9:2006/AC:2008 - Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006/Cor 1:2007)

Relations

Replaced By: EN ISO 16000-9:2024 - Indoor air - Part 9: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Emission test chamber method (ISO 16000-9:2024)
Effective Date: 16-Oct-2019

Corrects: EN ISO 16000-9:2006 - Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006)
Effective Date: 22-Dec-2008

EN ISO 16000-9:2006/AC:2008 - Page 3 preview

EN ISO 16000-9:2006/AC:2008 - Page 1 preview

EN ISO 16000-9:2006/AC:2008 - Page 2 preview

Corrigendum

EN ISO 16000-9:2006/AC:2008

English language

3 pages

Preview

e-Library read for

AI-Chat

1 day

Create e-Library subscription and get permanent access to the document. Subscriptions are available for: 13 13.040 13.040.20

Frequently Asked Questions

What is EN ISO 16000-9:2006/AC:2007?

EN ISO 16000-9:2006/AC:2007 is a corrigendum published by the European Committee for Standardization (CEN). Its full title is "Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006/Cor 1:2007)". This standard covers: ISO - Taking over of an ISO Technical Corrigendum

What is the scope of EN ISO 16000-9:2006/AC:2007?

ISO - Taking over of an ISO Technical Corrigendum

What ICS categories does EN ISO 16000-9:2006/AC:2007 belong to?

EN ISO 16000-9:2006/AC:2007 is classified under the following ICS (International Classification for Standards) categories: 13.040.20 - Ambient atmospheres. The ICS classification helps identify the subject area and facilitates finding related standards.

What standards are related to EN ISO 16000-9:2006/AC:2007?

EN ISO 16000-9:2006/AC:2007 has the following relationships with other standards: It is inter standard links to EN ISO 16000-9:2024, EN ISO 16000-9:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

How can I access EN ISO 16000-9:2006/AC:2007?

EN ISO 16000-9:2006/AC:2007 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)

EN ISO 16000-9:2006/AC:2008

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO 16000-9:2006/Cor 1:2007)Air intérieur - Partie 9: Dosage de l'émission de composés organiques volatils de produits de construction et d'objets d'équipement - Méthode de la chambre d'essai d'émission (ISO 16000-9:2006/Cor 1:2007)Innenraumluftverunreinigungen - Teil 9: Bestimmung der Emission von flüchtigen organischen Verbindungen aus Bauprodukten und Einrichtungsgegenständen - Emissionsprüfkammer-Verfahren (ISO 16000-9:2006/Cor 1:2007)Ta slovenski standard je istoveten z:EN ISO 16000-9:2006/AC:2007SIST EN ISO 16000-9:2006/AC:2008en,fr13.040.20ICS:SLOVENSKI
STANDARDSIST EN ISO 16000-9:2006/AC:200801-marec-2008

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 16000-9:2006/ACDecember 2007Décembre 2007Dezember 2007ICS 13.040.20English versionVersion FrançaiseDeutsche FassungIndoor air - Part 9: Determination of the emission of volatile organiccompounds from building products and furnishing - Emission test chambermethod (ISO 16000-9:2006/Cor 1:2007)Air intérieur - Partie 9: Dosage del'émission de composés organiques volatilsde produits de construction et d'objetsd'équipement - Méthode de la chambred'essai d'émission (ISO 16000-9:2006/Cor1:2007)Innenraumluftverunreinigungen - Teil 9:Bestimmung der Emission von flüchtigenorganischen Verbindungen ausBauprodukten undEinrichtungsgegenständen -Emissionsprüfkammer-Verfahren (ISO16000-9:2006/Cor 1:2007)This corrigendum becomes effective on 5 December 2007 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 5 décembre 2007 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 5.Dezember 2007 zur Einarbeitung in die drei offiziellen Sprachfassungender EN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATION
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...

CEN

EN 16339:2025(Main)

Ambient air - Method for the determination of the concentration of nitrogen dioxide by diffusive sampling

SIST EN 16339:2025

This document specifies a method for the sampling of NO2 in ambient air using diffusive sampling followed by extraction and analysis by colourimetry or ion chromatography (IC). It can be used for the NO2 measurement in a concentration range of approximately 3 µg/m3 to 130 µg/m3 [12]. A sample is typically collected for a period of 1 to 4 weeks [14], with exposure periods depending on the design of the samplers and the concentration levels of NO2.
Several sorbents can be used for trapping NO2 in ambient air using a diffusive sampler [15]. This document specifies the application of triethanolamine as the reagent.
This document describes the application of a tube-type sampler (with either a cylindrical or a slightly conical tube), a badge-type sampler and a radial-type sampler.
The relative expanded uncertainty of NO2 measurements performed using these tube-type diffusive samplers can potentially be lower than 25 % for individual measurements. When aggregating results to form annual average values, the relative expanded uncertainty can be further reduced to levels below 15 % due to the reduction of random effects on uncertainty [9].
NOTE NO2 passive samplers are also employed to measure NOx with the addition of an oxidant to convert ambient NO into NO2. A second NO2 sampler is also deployed without the oxidant and the concentration of NO is determined from the difference of the two samplers [16].

Standard
54 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 14625:2024(Main)

Ambient air - Standard method for the measurement of the concentration of ozone by ultraviolet photometry

SIST EN 14625:2025

This European Standard specifies a continuous measurement method for the determination of the concentrations of ozone present in ambient air based on the ultraviolet photometric measuring principle. This standard describes the performance characteristics and sets the relevant minimum criteria required to select an appropriate ultraviolet photometric analyser by means of type approval tests. It also includes the evaluation of the suitability of an analyser for use in a specific fixed site so as to meet the data quality requirements as specified in Annex I of Directive 2008/50/EC [1] and requirements during sampling, calibration and quality assurance for use.
The method is applicable to the determination of the concentration of ozone present in ambient air up to 500 μg/m3.
This concentration range represents the certification range for ozone for the type approval test.
NOTE 1 Other ranges may be used for measurement systems applied at rural locations monitoring ecosystems.
NOTE 2 When the standard is used for other purposes than Directive 2008/50/EC, the ranges and uncertainty requirements may not apply.
The method covers the determination of ambient air concentrations of ozone in zones classified as rural areas, urban and urban-background areas.
The results are expressed in μg/m3 (at 20 °C and 101,3 kPa).
NOTE 3 500 μg/m3 of O3 corresponds to 250 nmol/mol of O3 at 20 °C and 101,3 kPa.
This standard contains information for different groups of users.
Clauses 5 to 7 and Annexes B and C contain general information about the principles of ozone measurement by ultraviolet photometric analyser and sampling equipment.
Clause 8 and Annex E are specifically directed towards test houses and laboratories that perform type-approval testing of ozone analysers. These sections contain information about:
− type-approval test conditions, test procedures and test requirements;
− analyser performance requirements;
− evaluation of the type-approval test results;
− evaluation of the uncertainty of the measurement results of the ozone analyser based on the type-approval test results.
Clauses 9 to 11 and Annexes F and G are directed towards monitoring networks performing the practical
measurements of ozone in ambient air. These sections contain information about:
− initial installation of the analyser in the monitoring network and acceptance testing;
− ongoing quality assurance/quality control;
− calculation and reporting of measurement results;
− evaluation of the uncertainty of measurement results under practical monitoring conditions.

Standard
114 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 14626:2024(Main)

Ambient air - Standard method for the measurement of the concentration of carbon monoxide by non-dispersive infrared spectroscopy

SIST EN 14626:2025

This European Standard specifies a continuous measurement method for the determination of the concentration of carbon monoxide present in ambient air based on the non-dispersive infrared spectroscopic measuring principle.
This standard describes the performance characteristics and sets the relevant minimum criteria required to select an appropriate non-dispersive infrared spectroscopic analyser by means of type approval tests. It also includes the evaluation of the suitability of an analyser for use in a specific fixed site so as to meet the data quality requirements as specified in Annex I of Directive 2008/50/EC [1] and requirements during sampling, calibration and quality assurance for use.
The method is applicable to the determination of the mass concentration of carbon monoxide present in ambient air up to 100 mg/m3 carbon monoxide. This concentration range represents the certification range for the type approval test.
NOTE 1 Other ranges may be used depending on the levels present in ambient air.
NOTE 2 When the standard is used for other purposes than for measurements required by Directive 2008/50/EC, the ranges and uncertainty requirements may not apply.
The method covers the determination of ambient air concentrations of carbon monoxide in zones classified as rural areas, urban-background areas and traffic-orientated locations and locations influenced by industrial sources.
The results are expressed in mg/m3 (at 20 °C and 101,3 kPa).
NOTE 3 100 mg/m3 of CO corresponds to 86 μmol/mol of CO.
This standard contains information for different groups of users.
Clauses 5 to 7 and Annexes B, C and D contain general information about the principles of carbon monoxide measurement by non-dispersive infrared spectroscopic analyser and sampling equipment.
Clause 8 and Annex E are specifically directed towards test houses and laboratories that perform type-approval testing of carbon monoxide analysers. These sections contain information about:
− type-approval test conditions, test procedures and test requirements;
− analyser performance requirements;
− evaluation of the type-approval test results;
− evaluation of the uncertainty of the measurement results of the carbon monoxide analyser based on the type approval test results.
Clauses 9 to 11 and Annex F are directed towards monitoring networks performing the practical measurements of carbon monoxide in ambient air. These sections contain information about:
− initial installation of the analyser in the monitoring network and acceptance testing;
− ongoing quality assurance/quality control;
− calculation and reporting of measurement results;
− evaluation of the uncertainty of measurement results under practical monitoring conditions.

Standard
105 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 14212:2024(Main)

Ambient air - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence

SIST EN 14212:2025

This document specifies a continuous measurement method for the determination of the concentration of sulfur dioxide present in ambient air based on the ultraviolet fluorescence measuring principle. This document describes the performance characteristics and sets the relevant minimum criteria required to select an appropriate ultraviolet fluorescence analyser by means of type testing. It also includes the evaluation of the suitability of an analyser for use in a specific fixed site so as to meet the data quality requirements as specified in Annex I of Directive 2008/50/EC [1] and requirements during sampling, calibration and quality assurance for use.
The method is applicable to the determination of the mass concentration of sulphur dioxide present in ambient air up to 1000 µg/m3. This concentration range represents the certification range for sulfur dioxide for type testing.
NOTE 1   It is possible to use other ranges depending on the levels present in ambient air.
NOTE 2   When this document is used for purposes other than for measurements required by Directive 2008/50/EC, the ranges and uncertainty requirements possibly do not apply.
The method covers the determination of ambient air concentrations of sulfur dioxide in locations classified as rural areas, urban-background areas, and for sampling influenced by traffic or industrial sources.
The results are expressed in µg/m3 (at 20 °C and 101,3 kPa).
NOTE 3   1 000 µg/m3 of SO2 corresponds to 376 nmol/mol of SO2.
This document contains information for different groups of users.
Clause 5 to Clause 7 and Annex C and Annex D contain general information about the principles of sulfur dioxide measurement by ultraviolet fluorescence analyser and sampling equipment.
Clause 8 and Annex E are specifically directed towards test houses and laboratories that perform type testing of sulfur dioxide analysers. These sections contain information about:
—   type testing conditions, test procedures and test requirements;
—   analyser performance requirements;
—   evaluation of the type testing results;
—   evaluation of the uncertainty of the measurement results of the sulfur dioxide analyser based on the type testing results.
Clause 9 to Clause 11 and Annex F and Annex G are directed towards monitoring networks performing the practical measurements of sulfur dioxide in ambient air. These sections contain information about:
—   initial installation of the analyser in the monitoring network and acceptance testing;
—   ongoing quality assurance/quality control;
—   calculation and reporting of measurement results;
—   evaluation of the uncertainty of the measurement results under practical monitoring conditions.
This document represents an evolution of earlier editions (EN 14212:2005 and EN 14212:2012). It is advisable that when equipment is procured it complies fully with this document.
NOTE 4   Type testing performed prior to the publication of this document for the purpose of demonstrating equivalence are still valid.
NOTE 5   Analysers type tested prior to the publication of this document remain valid for use for regulated monitoring purposes.

Standard
124 pages
English language
e-Library read for
AI-Chat
1 day

CEN

EN 14211:2024(Main)

Ambient air - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence

SIST EN 14211:2025

This document specifies a continuous measurement method for the determination of the concentrations of nitrogen dioxide and nitrogen monoxide present in ambient air based on the chemiluminescence measuring principle. This document describes the performance characteristics and sets the relevant minimum criteria required to select an appropriate chemiluminescence analyser by means of type testing. It also includes the evaluation of the suitability of an analyser for use in a specific fixed site so as to meet the data quality requirements as specified in Annex I of Directive 2008/50/EC [1] and requirements during sampling, calibration and quality assurance for use.
The method is applicable to the determination of the concentration of nitrogen dioxide present in ambient air up to 500 µg/m3. This concentration range represents the certification range for nitrogen dioxide for type testing.
The method is applicable to the determination of the concentration of nitrogen monoxide present in ambient air up to 1 200 µg/m3. This concentration range represents the certification range for nitrogen monoxide for the type testing.
NOTE 1   It is possible to use other ranges depending on the levels present in ambient air.
NOTE 2   When this document is used for purposes other than for measurements required by Directive2008/50/EC, the ranges and uncertainty requirements possibly do not apply.
The method covers the determination of ambient air concentrations of nitrogen dioxide and nitrogen monoxide in zones classified as rural areas, urban-background areas, traffic-orientated locations and locations influenced by industrial sources.
The results are expressed in µg/m3 (at 20 °C and 101,3 kPa).
NOTE 3   500 µg/m3 of nitrogen dioxide corresponds to 261 nmol/mol of nitrogen dioxide at 20 °C and 101,3 kPa. 1 200 µg/m3 of nitrogen monoxide corresponds to 962 nmol/mol of nitrogen monoxide at 20 °C and 101,3 kPa.
This document contains information for different groups of users.
Clause 5 to Clause 7 and Annex B and Annex C contain general information about the principles of NOx measurement by chemiluminescence analyser and sampling equipment.
Clause 8 and Annex E are specifically directed towards test houses and laboratories that perform type testing of NOx analysers. These sections contain information about:
—   type testing conditions, test procedures and test requirements;
—   analyser performance requirements;
—   evaluation of the type testing results;
—   evaluation of the uncertainty of the measurement results of the NOx analyser based on the type testing results.
Clause 9 to Clause 11 and Annex F and Annex G are directed towards monitoring networks performing the practical measurements of NOx in ambient air. These sections contain information about:
—   initial installation of the analyser in the monitoring network and acceptance testing;
—   ongoing quality assurance/quality control;
—   calculation and reporting of measurement results;
—   evaluation of the uncertainty of measurement results under practical monitoring conditions.
This document represents an evolution of earlier editions (EN 14211:2005 and EN 14211:2012). It is advisable that when equipment is procured it complies fully with this document.
NOTE 4   Type testing performed prior to the publication of this document for the purpose of demonstrating equivalence are still valid.
NOTE 5   Analysers type tested prior to the publication of this document remain valid for use for regulated monitoring purposes.

Standard
120 pages
English language
e-Library read for
AI-Chat
1 day

CEN

CEN/TS 17660-2:2024(Main)

Air quality - Performance evaluation of air quality sensor systems - Part 2: Particulate matter in ambient air

SIST-TS CEN/TS 17660-2:2025

This document specifies the general principles, including testing procedures and requirements, for the classification of performance of low-cost sensor systems for the monitoring of particulate matter in ambient air at fixed sites. The classification of sensor systems includes tests that are performed under prescribed conditions. It does not guarantee performance in locations that are different from the tests, variations in meteorological climate from the test programme or account for stability over time, which can only be assessed under ongoing quality control strategies.
The described procedure is applicable to the determination of the mass concentration of particulate matter. The pollutants that are considered in this document are PM10 and PM2,5 in the range of concentrations expected in ambient air.
This document provides a classification that is consistent with the requirements for indicative measurements and objective estimation defined in Directive 2008/50/EC. In addition, it provides a classification for applications (non-regulatory measurements) that require more relaxed performance criteria.
This document applies to sensor systems used as individual systems. It does not apply to sensor systems as part of a sensor network. However, for some applications (e.g. in cities) sensor systems are deployed as part of a sensor network. Annex A provides information on the use of sensor systems as nodes in a sensor network.

Technical specification
55 pages
English language
e-Library read for
AI-Chat
1 day

CEN

CEN/TS 18073:2024(Main)

Ambient air - Determination of lung deposited surface area (LDSA) concentration using aerosol monitors based on diffusion charging

SIST-TS CEN/TS 18073:2025

This document specifies a process for the electrical diffusion charging of aerosols with subsequent measurement of particle charge. With the aid of this method, it is possible to determine the lung-deposited surface area (LDSA) concentration of particles in ambient air. Depending on the design of the electrical diffusion charger, the LDSA of particles in the size range of approximately 20 nm to approximately 300 nm is measurable.
Furthermore, this document specifies design criteria for LDSA measuring aerosol monitors as well as performance criteria and the associated test procedures. The performance criteria depend on the application and they are more stringent when the instrument is operated in an air quality monitoring station.
In the determination of the LDSA concentration, the share of geometric particle surface area concentration is determined that can be deposited in the alveolar region of the human lung. Typical particle surface area concentrations with alveolar deposition measured in urban areas range from 5 µm2/cm3 to 50 µm2/cm3.
Instruments based on this measurement principle can be designed to be very compact with a low power consumption. This makes them ideally suited for handheld measurements, other forms of mobile application or to measure personal exposure. On the other hand, they can be easily adapted to serve as a stationary instrument in air quality monitoring stations.

Technical specification
32 pages
English language
e-Library read for
AI-Chat
1 day

CEN

CEN/TS 18044:2024(Main)

Ambient air - Determination of the concentration of levoglucosan - Chromatographic method

SIST-TS CEN/TS 18044:2024

This document specifies a chromatographic method for the determination of levoglucosan in aqueous or organic extracts of filter samples collected in accordance with EN 12341:2023 [5]. The method has been tested for concentrations of ca. 10 ng/m3 up to ca. 3 000 ng/m3 with a sampling duration of 24 h. The procedure is also suitable for the determination of galactosan and mannosan.
Depending on the analysis instrumentation used, the carbohydrates inositol, glycerol, threitol/erythritol, xylitol, arabitol, sorbitol, mannitol, threalose, mannose, glucose, galactose and fructose can also be determined. However, no performance characteristics are given for these compounds in this document.

Technical specification
42 pages
English language
e-Library read for
AI-Chat
1 day

02-Jul-2024
13.040.20
CEN/TC 264

CEN

EN 16976:2024(Main)

Ambient air - Determination of the particle number concentration of atmospheric aerosol

SIST EN 16976:2024

This document specifies a standard method for determining the particle number concentration in ambient air in a range up to about 107 cm–3 for averaging times equal to or larger than 1 min. The standard method is based on a Condensation Particle Counter (CPC) operated in the counting mode and an appropriate dilution system for concentrations exceeding the counting mode range. It also defines the performance characteristics and the minimum requirements of the instruments to be used. The lower and upper sizes considered within this document are 10 nm and a few micrometres, respectively. This document gives guidance on sampling, operation, data processing and QA/QC procedures including calibration parameters.

Standard
56 pages
English language
e-Library read for
AI-Chat
1 day

CEN

CEN/TR 18076:2024(Main)

Ambient air - Equivalence of automatic measurements of elemental carbon (EC) and organic carbon (OC) in PM

SIST-TP CEN/TR 18076:2024

This document provides definitions of the quantities measured by various candidate methods, their basic principles, and their advantages and disadvantages.
Currently no traceable primary reference materials are available for EC and OC analyses. This document provides guidance to test the equivalence between candidate methods and EN 16909 for EC and/or OC determination(s), based on EN 16450.

Technical report
17 pages
English language
e-Library read for
AI-Chat
1 day