EN 1762:1997
(Main)Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification
This European Standard specifies the requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in liquid or gaseous phase and natural gas with a maximum working pressure of -30°C to +70°C and, when designated -LT, -50°C to +70°C.
Gummischläuche und -schlauchleitungen für Flüssiggas LPG (flüssig oder gasförmig) und Erdgas bis 25 bar (2,5 MPa) - Spezifikation
Diese Europäische Norm legt Anforderungen für Gummischläuche und -schlauchleitungen fest, die zur Übergabe von Flüssiggas LPG (in der flüssigen oder gasförmigen Phase) sowie Erdgas bei Drücken bis zu maximal 25 bar (2,5 MPa) oder Vakuum innerhalb eines Temperaturbereichs von -30°C bis +70°C oder -50°C bis +70°C (Typ LT) verwendet werden.
Tuyaux et flexibles en caoutchouc pour le gaz de pétrole liquéfié GPL (en phase liquide ou gazeuse) et le gaz naturel jusqu'à 25 bar (2,5 MPa) - Spécification
La présente norme européenne spécifie les prescriptions relatives aux tuyaux et flexibles en caoutchouc destinés au transport du gaz de pétrole liquéfié (G.P.L.) en phase liquide ou gazeuse et du gaz nturel sous une pression maximale de service de 25 bar (2,5 MPa) et sous vide dans la plage de température de -30°C à +70°C et -50°C à +70°C pour le type L.T.
Gumene cevi in cevni priključki za utekočinjeni propan/butan (tekoča ali plinska faza) in zemeljski plin do 25 barov (2,5 MPa) - Specifikacija
General Information
- Status
- Withdrawn
- Publication Date
- 21-Oct-1997
- Withdrawal Date
- 28-Oct-2003
- Technical Committee
- CEN/TC 218 - Rubber and plastics hoses and hose assemblies
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 29-Oct-2003
- Completion Date
- 29-Oct-2003
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 22-Dec-2008
Frequently Asked Questions
EN 1762:1997 is a standard published by the European Committee for Standardization (CEN). Its full title is "Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification". This standard covers: This European Standard specifies the requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in liquid or gaseous phase and natural gas with a maximum working pressure of -30°C to +70°C and, when designated -LT, -50°C to +70°C.
This European Standard specifies the requirements for rubber hoses and rubber hose assemblies used for the transfer of liquefied petroleum gas (LPG) in liquid or gaseous phase and natural gas with a maximum working pressure of -30°C to +70°C and, when designated -LT, -50°C to +70°C.
EN 1762:1997 is classified under the following ICS (International Classification for Standards) categories: 23.040.70 - Hoses and hose assemblies. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1762:1997 has the following relationships with other standards: It is inter standard links to EN 1762:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1762:1997 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1762:1997 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Gummischläuche und -schlauchleitungen für Flüssiggas LPG (flüssig oder gasförmig) und Erdgas bis 25 bar (2,5 MPa) - SpezifikationTuyaux et flexibles en caoutchouc pour le gaz de pétrole liquéfié GPL (en phase liquide ou gazeuse) et le gaz naturel jusqu'a 25 bar (2,5 MPa) - SpécificationRubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Spe
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...