EN 28325:1990

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Dentistry - Dental rotary instruments - Test methods (ISO 8325:1985)Zahnheilkunde - Zahnärztliche rotierende Instrumente - Prüfverfahren (ISO 8325:1985)Art dentaire - Instruments rotatifs dentaires - Méthodes d'essai (ISO 8325:1985)Dentistry - Dental rotary instruments - Test methods (ISO 8325:1985)11.060.25Dental instrumentsICS:Ta slovenski standard je istoveten z:EN 28325:1990SIST EN 28325:2000en01-januar-2000SIST EN 28325:2000SLOVENSKI
STANDARD
International Standard INTERNATIONAL ORGANIZATION FOR STANDARDIZATION.MEIKI(nYHAPOAHAR OPrAHM3ALWlR l-IO CTAH,QAPTM3A~MM.ORGANISATlON INTERNATIONALE DE NORMALISATION Dental rotary instruments - Test methods Instruments ro ta tifs den taires - Mb thodes d’essai First edition - 1985-11-15 UDC 616.314-7 : 621.9.02 Ref. No. ISO 8325-1985 (E) Descriptors : dentistry, dental instruments, dental rotary-cutting instruments, tests, dimensional measurements. Price based on 5 pages SIST EN 28325:2000

Foreword ISO (the International Organization for Standardization) is a worldwide federation of national Standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Esch member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organitations, govern- mental and non-governmental, in liaison with ISO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 8325 was prepared by Technical Committee ISO/TC 106, Dentistry. Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless othetwise stated. 0 International Organkation for Standardkation, 1985 Printed in Switzerland SIST EN 28325:2000

INTERNATIONAL STANDARD ISO 8325-1985 (E) Dental rotary instruments - Test methods 1 Scope and field of application This International Standard specifies methods of test for dental rotary instruments such as burs, Cutters, diamond instruments and abrasives but excludes root canal instruments. In the rel- evant product Standards reference is made to the methods specified in this International Standard. b) dial jndicator with flat tungsten carbide blades; c) air gauge; d) dial indicator bore gauge. The measuring device shall be accurate to 0,Ol mm. For the testing of root canal instruments, see ISO 3630. 2 References ISO 1101, Technical drawings - Geometrical tolerancing - Tolerancing of form, orientation, location and run-out - Generalities, definitions, Symbols, indica tions on dra wings. I SO 1797, Dental ro tary instruments - Shanks. ISO 2859, Sampling procedures and tables for inspection by at- trib u tes. ISO 3630, Dental roo t canal instrumen ts. 3 Test methods 3.1 Diameter of working part 3.1.1 Apparatus One of the following devices or other instruments of equivalent accuracy shall be used to determine the diameter of the work- ing patt : a) tungsten carbide ring gauges which arc regularly checked with mating plugs; Mechanical measuring devices shall have a measuring forte of < 1,s N. In case of dispute, the reference method shall be the tungsten carbide ring gauge. 3.1.2 Measurement Point On cylindrical instruments, the measurement Point shall be the middle of the working Part, unless otherwise specified. 3.1.3 Procedure For burs, Cutters and abrasives, make one measurement at the largest diameter of the working part of the instrument. See figures 1 and 2. For diamond instruments, make three measurements at angles of 120° at the relevant diameter as shown in figure 3. Release the forte, lift the test piece and rotate it before each measure- ment. Use the same forte for each measurement. Record the average of the three values. SIST EN 28325:2000

ISO 8325-1985 (El d Figure 1 - Measure a brasives ment of Figure 2 - of burs Measurement and Cutters 3.2 Neck diameter 3.2.1 Apparatus Dia1 indicator, with knife-edged tungsten carbide blades of 0 3 + 0,02 mm thickness, or other devices of equivalent I - accuracy. The measuring device shall be accurate to
...