EN 3005:2003

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Aerospace series - Nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa/730 °C - Technical specification -MUTTERN,SELBSTSICHERND,AUS HOCHWARMFESTEM NICKELBASISLEGIERUNG NI-P101HT - KLASSE 1210 MPA/730 GRADEN C -- TECHNISCHE LIEFERBEDINGUNGENECROUS,AUTO-FREINANT,EN ALLIAGE RESISTANT A CHAUD A BASE DE NICKEL NI-P101HT - CLASSIFICATION 1210 MPA/730 DEGRES CAerospace series - Nuts, self-locking, in heat resisting nickel base alloy NI-P101HT (Waspaloy) - Classification: 1210 MPa/730 °C - Technical specification -49.030.30MaticeNutsICS:Ta slovenski standard je istoveten z:EN 3005:2003SIST EN 3005:2004en01-maj-2004SIST EN 3005:2004SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3005January 2003ICS 49.030.30English versionAerospace series - Nuts, self-locking, in heat resisting nickelbase alloy NI-P101HT (Waspaloy) - Classification: 1210MPa/730°C - Technical specificationThis European Standard was approved by CEN on 24 June 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and UnitedKingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2003 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3005:2003 ESIST EN 3005:2004

1)Published as AECMA Prestandard at the date of publication of this standard2)In preparation at the date of publication of this standard3)Published as AECMA Technical Report at the date of publication of this standardSIST EN 3005:2004

equipment shallbe approved.The equipment for abrasive blastingshall be approved.5.3.3ThreadsThreads shall conform to therequirements of the product standard ordrawing prior to deformation of the selflocking feature.See 5.25.3.3.1Bearing surfacesquarenessThe bearing surface of the nut shall besquare with the thread pitch diameter axiswithin the limits specified on the productstandard or drawing.The squareness requirement shall applyto the complete bearing surface of thepart nuts having a bearing surfaceexceeding 1,5 times the tread majordiameter, the squareness requirementshall, unless otherwise specified by theproduct standard or drawing, apply only tothat portion of the bearing surface of thepart contained within a
...