Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties

This document, part of EN 603 series of standards, specifies the mechanical properties of wrought forging stock in aluminium and aluminium alloys for general engineering applications.
The chemical composition and temper designations for these alloys are specified in EN 573-3 and EN 515 respectively.

Aluminium und Aluminiumlegierungen - Stranggepresstes oder Schmiedevormaterial - Teil 2: Mechanische Eigenschaften

Dieses Dokument, das Teil der Normenreihe EN 603 ist, legt die mechanischen Eigenschaften von stranggepresstem und gewalztem Schmiedevormaterial für allgemeine technische Anwendungen fest.
Die chemische Zusammensetzung und die Bezeichnungen der Werkstoffzustände für diese Legierungen werden in EN 573 3 bzw. EN 515 beschrieben.

Aluminium et alliages d'aluminium - Produits corroyés destinés à la forge - Partie 2 : Caractéristiques mécaniques

Le présent document, qui fait partie de la série de normes EN 603, spécifie les caractéristiques mécaniques des produits corroyés en aluminium et alliages d'aluminium destinés à la forge pour applications techniques générales.
La composition chimique et la désignation des états métallurgiques de ces alliages sont respectivement spécifiées dans l’EN 573-3 et l’EN 515.

Aluminij in aluminijeve zlitine - Valjani material za kovanje - 2. del: Mehanske lastnosti

General Information

Status
Not Published
Publication Date
07-Aug-2024
Current Stage
5060 - Closure of Vote - Formal Approval
Start Date
13-Jun-2024
Due Date
16-Jul-2025
Completion Date
13-Jun-2024

Relations

Buy Standard

Draft
prEN 603-2:2024
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 603-2:2024
01-januar-2024
Aluminij in aluminijeve zlitine - Valjani material za kovanje - 2. del: Mehanske
lastnosti
Aluminium and aluminium alloys - Wrought forging stock - Part 2: Mechanical properties
Aluminium und Aluminiumlegierungen - Stranggepresstes oder gewalztes
Schmiedevormaterial - Teil 2: Mechanische Eigenschaften
Aluminium et alliages d'aluminium - Produits corroyés destinés à la forge - Partie 2:
Caractéristiques mécaniques
Ta slovenski standard je istoveten z: prEN 603-2
ICS:
77.150.10 Aluminijski izdelki Aluminium products
oSIST prEN 603-2:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 603-2:2024

---------------------- Page: 2 ----------------------
oSIST prEN 603-2:2024


DRAFT
EUROPEAN STANDARD
prEN 603-2
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2023
ICS 77.150.10 Will supersede EN 603-2:1996
English Version

Aluminium and aluminium alloys - Wrought forging stock -
Part 2: Mechanical properties
Aluminium et alliages d'aluminium - Produits corroyés Aluminium und Aluminiumlegierungen -
destinés à la forge - Partie 2: Caractéristiques Stranggepreßtes oder gewalztes Schmiedevormaterial
mécaniques - Teil 2: Mechanische Eigenschaften
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 132.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 603-2:2023 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 603-2:2024
prEN 603-2:2023 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 4
4 Tensile testing . 4
5 Mechanical properties . 4
5.1 Extruded forging stock . 4
5.2 Rolled forging stock . 7
6 Electrical conductivity . 7
Annex A (normative) Rules for rounding . 8
Bibliography . 9

2

-
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.