EN 196-8:2003
(Main)Methods of testing cement - Part 8: Heat of hydration - Solution method
Methods of testing cement - Part 8: Heat of hydration - Solution method
This European Standard describes a method of determining the heat of hydration of cements by means of solution calorimetry, also known as the solution method. The heat of hydration is expressed in joules per gram of cement.
This standard is applicable to cements and hydraulic binders whatever their chemical composition.
NOTE 1 Another procedure, called the semi-adiabatic method, is described in prEN 196-9. Either procedure can be used independently.
NOTE 2 It has been demonstrated that the best correlation between the two methods is obtained at 7 days for the solution method compared with 41 h for the semi-adiabatic method (prEN 196-9).
Prüfverfahren für Zement - Teil 8: Hydratationswärme - Lösungsverfahren
Diese Europäische Norm beschreibt ein Verfahren zur Messung der Hydratationswärme von Zementen mit Hilfe eines Lösungskalorimeters, des sogenannten Lösungsverfahrens. Ein anderes Verfahren, das sogenannte teiladiabatische Verfahren, ist in einer anderen Norm, EN 196-9 beschrieben. Beide Verfahren dürfen unabhängig voneinander angewandt werden. Die ermittierte Wärmemenge ist in Joule je Gramm des Zements angegeben. Diese Europäische Norm gilt für alle hydraulische Bindemittel, ungeachtet ihrer chemischen Zusammensetzung.
Méthodes d'essais des ciments - Partie 8: Chaleur d'hydratation - Méthode par dissolution
La présente Norme européenne décrit une méthode de mesure de la chaleur d'hydratation des ciments par calorimétrie de dissolution, appelée méthode par dissolution. La chaleur d'hydratation est exprimée en joules par gramme de ciment.
La présente norme s'applique aux ciments et aux liants hydrauliques quelle que soit leur composition chimique.
NOTE 1 Une autre méthode, dite méthode semi-adiabatique, est décrite dans la norme EN 196-9. Les deux méthodes peuvent être utilisées indépendamment.
NOTE 2 Il a été démontré que la meilleure corrélation entre les deux méthodes est obtenue en comparant les valeurs à 7 j par la méthode par dissolution (EN 196-8) et à 41 h par la méthode semi-adiabatique (EN 196-9).
Metode preskušanja cementa – 8. del: Toplota hidratacije – Metoda raztapljanja
General Information
- Status
- Withdrawn
- Publication Date
- 21-Oct-2003
- Withdrawal Date
- 23-Mar-2010
- Technical Committee
- CEN/TC 51 - Cement and building limes
- Drafting Committee
- CEN/TC 51/WG 12 - Special performance criteria
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 24-Mar-2010
- Completion Date
- 24-Mar-2010
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 27-Mar-2010
- Effective Date
- 28-Jan-2026
- Effective Date
- 22-Dec-2008
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
BBA (British Board of Agrément)
UK construction product certification.
Sponsored listings
Frequently Asked Questions
EN 196-8:2003 is a standard published by the European Committee for Standardization (CEN). Its full title is "Methods of testing cement - Part 8: Heat of hydration - Solution method". This standard covers: This European Standard describes a method of determining the heat of hydration of cements by means of solution calorimetry, also known as the solution method. The heat of hydration is expressed in joules per gram of cement. This standard is applicable to cements and hydraulic binders whatever their chemical composition. NOTE 1 Another procedure, called the semi-adiabatic method, is described in prEN 196-9. Either procedure can be used independently. NOTE 2 It has been demonstrated that the best correlation between the two methods is obtained at 7 days for the solution method compared with 41 h for the semi-adiabatic method (prEN 196-9).
This European Standard describes a method of determining the heat of hydration of cements by means of solution calorimetry, also known as the solution method. The heat of hydration is expressed in joules per gram of cement. This standard is applicable to cements and hydraulic binders whatever their chemical composition. NOTE 1 Another procedure, called the semi-adiabatic method, is described in prEN 196-9. Either procedure can be used independently. NOTE 2 It has been demonstrated that the best correlation between the two methods is obtained at 7 days for the solution method compared with 41 h for the semi-adiabatic method (prEN 196-9).
EN 196-8:2003 is classified under the following ICS (International Classification for Standards) categories: 91.100.10 - Cement. Gypsum. Lime. Mortar. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 196-8:2003 has the following relationships with other standards: It is inter standard links to EN 196-8:2010, EN 12715:2000; is excused to EN 196-9:2003. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 196-8:2003 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC; Standardization Mandates: M/114. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 196-8:2003 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Metode preskušanja cementa – 8. del: Toplota hidratacije – Metoda raztapljanjaPrüfverfahren für Zement - Teil 8: Hydratationswärme - LösungsverfahrenMéthodes d'essais des ciments - Partie 8: Chaleur d'hydratation - Méthode par dissolutionMethods of testing cement - Part 8: Heat of hydration - Solution method91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...