EN 14617-12:2005

SLOVENSKI STANDARD
01-julij-2005
Aglomeriran kamen - Preskusne metode - 12. del: Ugotavljanje dimenzijske
stabilnosti
Agglomerated stone - Test methods - Part 12: Determination of dimensional stability
Künstlich hergestellter Stein - Prüfverfahren - Teil 12: Bestimmung der Maßhaltigkeit
Pierre agglomérée - Méthodes d'essai - Partie 12: Détermination de la stabilité
dimensionnelle
Ta slovenski standard je istoveten z: EN 14617-12:2005
ICS:
91.100.15 Mineralni materiali in izdelki Mineral materials and
products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 14617-12
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2005
ICS 91.100.15
English version
Agglomerated stone - Test methods - Part 12: Determination of
dimensional stability
Pierre agglomérée - Méthodes d'essai - Partie 12: Künstlich hergestellter Stein - Prüfverfahren - Teil 12:
Détermination de la stabilité dimensionnelle Bestimmung der Maßhaltigkeit
This European Standard was approved by CEN on 3 February 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 14617-12:2005: E
worldwide for CEN national Members.

Contents
Foreword.3
1 Scope .4
2 Normative references .4
3 Principle.4
4 Apparatus .4
5 Specimens .5
6 Test procedure.5
7 Expression of results .5
8 Test report .6
Annex A (informative) Classification meaning .8
Bibliography .9

Foreword
This document (EN 14617-12:2005) has been prepared by Technical Committee CEN/TC 246 “Natural stones”, the
secretariat of which is held by UNI.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by September 2005, and conflicting national standards shall be withdrawn at the
latest by September 2005.
Test methods for agglomerated stones consist of the following:
EN 14617-1, Agglomerated stone - Test methods – Part 1: Determination of apparent density and water absorption
EN 14617-2, Agglomerated stone – Test methods – Part 2: Determination of flexural strength (bending)
prEN 14617-3, Agglomerated stone - Test methods – Part 3: Determination of slipperiness
EN 14617-4, Agglomerated stone - Test methods – Part 4: Determination of the abrasion resistance
EN 14617-5, Agglomerated stone - Test methods – Part 5: Determination of freeze and thaw resistance
EN 14617-6, Agglomerated stone - Test methods – Part 6: Determination of thermal shock resistance
prEN 14617-7, Agglomerated stone – Test methods – Part 7: Determination of ageing
prEN 14617-8, Agglomerated stone – Test methods – Part 8: Determination of resistance to fixing (dowel hole)
EN 14617-9, Agglomerated stone - Test methods – Part 9: Determination of impact resistance
EN 14617-10, Agglomerated stone – Test methods – Part 10: Determination of chemical resistance
EN 14617-11, Agglomerated stone – Test methods – Part 11: Determination of linear thermal expansion coefficient
EN 14617-12, Agglomerated stone – Test methods – Part 12: Determination of dimensional stability
EN 14617-13, Agglomerated stone – Test methods – Part 13: Determination of electrical resistivity
prEN 14617-14, Agglomerated stone – Test methods – Part 14: Determination of surface hardness
EN 14617-15, Agglomerated stone – Test methods – Part 15: Determination of compressive strength
EN 14617-16, Agglomerated stone – Test methods – Part 16: Determination of dimensions, geometric characteristics
and surface quality of modular tiles
prEN 14617-17, Agglomerated stone – Test methods – Part 17: Determination of biological resistance
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark,
Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta,
Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
-----------
...