iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 411:1995

(Main)

Sanitary tapware - Waste fittings for sinks - General technical specifications

Sanitary tapware - Waste fittings for sinks - General technical specifications

This standard specifies the dimensional characteristics, materials, along with performance and test methods for waste outlets and traps for sinks. Quality control and quality assurance will be handled by the competent bodies.

Sanitärarmaturen - Ablaufgarnituren für Spülen - Allgemeine technische Anforderungen

Diese Norm spezifiziert die Masse, Materialien, Eigenschaften und Prüfverfahren  für Ablaufventile und Geruchverschlüsse für Spülen. Die Qualitätskontrolle und Qualitätssicherung wird von den zuständigen Gremien behandelt.

Robinetterie sanitaire - Dispositifs de vidage des éviers - Spécifications techniques générales

La présente norme a pour objet de spécifier les caractéristiques dimensionnelles, les matériaux, les performances et méthodes d'essai des systèmes de vidages et siphons des éviers. Les contrôles qualité et les assurances qualité seront réglés par les instances compétentes.

Sanitarne armature - Odtočne armature za pomivalna korita - Splošne tehnične zahteve

General Information

Status
Withdrawn
Publication Date
16-May-1995
Withdrawal Date
22-Jan-2002
ICS
91.140.70 - Sanitary installations
Technical Committee
CEN/TC 165 - Waste water engineering
Drafting Committee
CEN/TC 165/WG 11 - Waste fittings
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
23-Jan-2002
Completion Date
23-Jan-2002
Directive
93/38/EEC - Procurement procedures of entities operating in the water, energy, transport and telecommunications sectors
Mandate
M/BC/CEN/88/15 - Standardization request to CEN/CENELEC in the field of Water supply, drainage and sewerage
Ref Project
SIST EN 411:1998 - Sanitary tapware - Waste fittings for sinks - General technical specifications

Relations

Replaced By
EN 274-1:2002 - Waste fittings for sanitary appliances - Part 1: Requirements
Effective Date
22-Dec-2008
Replaced By
EN 274-2:2002 - Waste fittings for sanitary appliances - Part 2: Test methods
Effective Date
22-Dec-2008
Replaced By
EN 274-3:2002 - Waste fittings for sanitary appliances - Part 3: Quality control
Effective Date
22-Dec-2008

Buy Standard

EN 411:1998EN 411:1998
PreviousNext
Standard
EN 411:1998
German language
12 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.]DKWHYHSanitärarmaturen - Ablaufgarnituren für Spülen - Allgemeine technische AnforderungenRobinetterie sanitaire - Dispositifs de vidage des éviers - Spécifications techniques généralesSanitary tapware - Waste fittings for sinks - General technical specifications91.140.70Sanitarne napraveS
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 274-1:2002(Main)
Waste fittings for sanitary appliances - Part 1: Requirements
SIST EN 274-1:2002

This standard specifies the dimensional, performance, materials and marking requirements for waste outlets, traps and overflows for kitchen sinks, shower trays, wash basins, bidets and baths which are connected to gravity drainage systems, whatever the purpose of the building.
This standard does not specify requirements for waste outlets, traps and overflows which are integral with sanitary appliances.
NOTE   All figures in this standard are diagrammatic only.
This standard does not cover the possible effect of aggressive drain cleaning materials on products.

  • Standard
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 274-2:2002(Main)
Waste fittings for sanitary appliances - Part 2: Test methods
SIST EN 274-2:2002

This standard specifies test methods for the requirements of waste outlets, traps and overflows in accordance with EN 274-1:2002.
NOTE   All figures in this standard are diagrammatic only.

  • Standard
    10 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 274-3:2002(Main)
Waste fittings for sanitary appliances - Part 3: Quality control
SIST EN 274-3:2002

This standard specifies the requirements for quality control for waste outlets, traps and overflows for kitchen sinks, shower trays, wash basins, bidets and baths which are connected to gravity drainage systems, whatever the purpose of the building, to ensure conformity of these products with EN 274-1.

  • Standard
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 246:2021(Main)
Sanitary tapware - General specifications for aerators
SIST EN 246:2022

This document specifies:
- the dimensional, mechanical, hydraulic and acoustic characteristics with which sanitary tapware aerators (with and without flow regulation) should comply;
- the procedures for testing these characteristics.
This document is applicable to:
- Sanitary tapware aerators intended to be mounted on tapware used with sanitary appliances in toilets, bathrooms and kitchens (e.g. single taps, combination tap assemblies, mechanical mixing valves, thermostatic mixing valves);
- Sanitary tapware aerators used under the following pressure and temperature conditions (see Table 1).
[Table 1: Conditions for the use of aerators]
NOTE 1   Sanitary tapware aerators can only be connected downstream of the obturator of the sanitary tapware product.
NOTE 2   For the purposes of brevity, sanitary tapware aerators will be detailed only as aerators in the rest of this document.
NOTE 3   The tests described in this document are type tests (laboratory tests) and not quality control tests carried out during manufacture.
NOTE 4   Aerator swivels are to be tested in combination with a specific aerator only and are therefore considered to be sanitary tapware accessories. (Testing of the stand-alone swivels is therefore not covered by the scope of this document. Where swivels are used they are considered to be part of the tapware constructions, e.g. for bidet taps).

  • Standard
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TR 17426:2019(Main)
Sanitary appliances - Drainage systems for the application of sanitary appliances
SIST-TP CEN/TR 17426:2019

This document describes the installation rules that must be followed to ensure proper functioning of the drainage system depending on the specified performance of the sanitary appliances.
These performance characteristics of sanitary appliances (defined in the harmonized standards EN 997, EN 13407, EN 14688, EN 14528 and EN 14527) are explained and brought into line with the application rules of standard series EN 12056.
According to Regulation (EU) 305/2011, legally binding information on building requirements must be provided by the National Product Information Point. Therefore, additional national requirements are mentioned informatively where information is available.

  • Technical report
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 33:2019(Main)
WC pans and WC suites - Connecting dimensions
SIST EN 33:2019

This document specifies the connecting dimensions of WC pans and WC suites regardless of the materials used for their manufacture.
This document does not apply to siphonic action WC pans and WC suites.
NOTE 1   Other connecting dimensions are permitted, e.g. special designs of WC pans, if the manufacturer supplies or recommends the appropriate fittings.
NOTE 2   The shape of the appliance in the figures is for illustration only; it in no way prejudices the final shape of the appliance, which is left to the initiative of the manufacturer.

  • Standard
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17125:2018(Main)
Domestic spas/whirlpool spas/hot tubs - Safety requirements and test methods
SIST EN 17125:2019

This document specifies safety requirements and test methods for domestic spas/whirlpool spas/hot tubs (see 3.2) for indoor and/or outdoor use, covering the following:
-   portable spas including inflatable spas;
-   exercise spas (factory-built or field-engineered);
-   Scandinavian hot tubs;
-   field-engineered spas;
-   any associated equipment.
This document also provides advice and guidance for installers and maintainers of domestic spas/whirlpool spas/hot tubs.
This document is not applicable to:
-   any type of swimming pool (domestic or public);
-   mini-pools according to EN 16927;
-   public spas (public use according to EN 15288);
-   paddling pools according to EN 71-8;
-   spas specifically intended for physical/medical therapy;
-   spas specifically intended for beauty therapy;
-   flotation tanks and flotation pools;
-   bath tubs (including whirlpool baths);
-   natural spas (name used to describe a bathing area, which is filled with untreated geothermally heated water);
-   birthing pools.

  • Standard
    67 pages
    English language
    sale 10% off
    e-Library read for
    1 day
  • Draft
    63 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14516:2015+A1:2018(Main + Amendment)
Baths for domestic purposes
SIST EN 14516:2015+A1:2019

This European Standard specifies "characteristics", test methods and procedures for evaluation of conformity for baths used for domestic purposes and personal hygiene, which ensure that the product, when installed and maintained in accordance with the manufacturer's instructions, will satisfy requirements for cleanability and durability.
This European Standard is applicable to all sizes and shapes of baths.
This European Standard does not cover baths for use with medical provisions.
NOTE 1   For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings.
NOTE 2   Annex A lists characteristics of materials commonly used for manufacturing baths.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 14527:2016+A1:2018(Main + Amendment)
Shower trays for domestic purposes
SIST EN 14527:2016+A1:2019

This European Standard specifies "characteristics", test methods and procedures for evaluation of conformity for shower trays used for domestic purposes which ensure that the product, when installed, used and maintained in accordance with the manufacturer's instructions, will satisfy cleanability and durability when used for personal hygiene.
This standard is applicable to all sizes and shapes of shower trays.
This standard does not cover shower trays for use with medical provisions.
NOTE 1   For the purpose of this standard the term "domestic purposes" includes use in hotels, accommodation for students, hospitals and similar buildings.
NOTE 2   Annex A lists characteristics of materials commonly used for manufacturing shower trays.

  • Standard
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12764:2015+A1:2018(Main + Amendment)
Sanitary appliances - Specification for whirlpool baths
SIST EN 12764:2015+A1:2019

This European Standard specifies "characteristics" for whirlpool baths, having a rated voltage of not more than 250 V for single phase appliances and 480 V for other appliances, which are intended to be installed in indoor domestic situations and used in accordance with the manufacturer’s instructions for personal hygiene. Such whirlpool baths are tested and supplied as a complete independent unit designed to be drained down after every use. They may be transported in several separate parts, for assembly on site, to facilitate delivery.
Safety aspects of Whirlpool baths (except use by young children and slow moving/weak elderly or disabled individuals) are covered by EN 60335 2 60.
Exclusions: this standard does not cover additional requirements for whirlpool baths intended for uses where specific medical provisions are required, or whirlpool baths for communal uses where they are not drained down after every use. Portable whirlpool devices are not covered by this standard.
For the purposes of this standard the term ‘domestic situations’ includes use in hotels, accommodation for students, hospitals and similar buildings.
Warning: Slow moving elderly or disabled persons should take care when using whirlpool baths. Young children should not be allowed to use whirlpool baths without supervision.
NOTE 1   It is unrealistic to expect manufacturers to provide a definition of what constitutes a ‘slow moving elderly or disabled person’, or ‘young children’. The former is the responsibility of the individual or a carer. The latter is a parental responsibility.
NOTE 2   When EN 60335-2-60 is amended to cover use of whirlpool baths by slow moving elderly or disabled persons and young children the warning given above will be deleted from this standard.

  • Standard
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day