EN 274-3:2002

SLOVENSKI STANDARD
01-december-2002
1DGRPHãþD
SIST EN 274:1998
SIST EN 329:1998
SIST EN 411:1998
Fazonski deli za odpadno vodo za sanitarne naprave – 3. del: Kontrola kakovosti
Waste fittings for sanitary appliances - Part 3: Quality control
Ablaufgarnituren für Sanitärausstattungsgegenständen - Teil 3: Güteüberwachung
Dispositifs de vidage des appareils sanitaires - Partie 3: Contrôle de la qualité
Ta slovenski standard je istoveten z: EN 274-3:2002
ICS:
91.140.70 Sanitarne naprave Sanitary installations
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 274-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2002
ICS 91.140.70 Supersedes together with EN 274-1:2002 and EN 274-
2:2002 the EN 274:1992, EN 329:1994 and EN 411:1995
English version
Waste fittings for sanitary appliances - Part 3: Quality control
Dispositifs de vidage des appareils sanitaires - Partie 3: Ablaufgarnituren für Sanitärausstattungsgegenständen -
Contrôle de qualité Teil 3: Güteüberwachung
This European Standard was approved by CEN on 20 January 2000.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 274-3:2002 E
worldwide for CEN national Members.

Contents
page
Foreword.3
1 Scope .3
2 Normative references .3
3 Terms and definitions.3
4 Quality control.4
4.1 General.4
4.2 Type testing.4
4.3 Factory production control.4
Annex A (informative) Control by third party (third party control).6
A.1 General.6
A.2 Procedure for the third party control.6
A.3 Report by the third party.7
A.4 Retesting.7
A.5 Non-conforming products.7
Bibliography .8
Foreword
This European Standard has been prepared by CEN/TC 165, "Wastewater engineering", the secretariat of which is
held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by July 2002, and conflicting national standards shall be withdrawn at the latest by
July 2002.
Together with Parts 1 and 2 of this standard this European Standard supersedes EN 274:1992, EN 239:1994 and
EN 411:1995.
The other parts of the European Standard contain the necessary statements on requirements and testing of waste
fittings.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this document: Austria, Belgium, the Czech Republic, Denmark, Finland, France,
Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
1 Scope
This standard specifies the requirements for quality control for waste outlets, traps and overflows for kitchen sinks,
shower trays, wash basins, bidets and baths which are connected to gravity drainage systems, whatever the
purpose of the building, to ensure conformity of these products with EN 274-1.
2 Normative references
This European Standard incorporates by dated or undated reference, provisions from other publications. These
normative references are cited at the appropriate places in the text, and the publications are listed hereafter. For
dated references, subsequent amendments to or revisions of any of these publications apply to this European
Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the
publication referred to applies (including amendments).
EN 274-1, Waste fittings for sanitary appliances - Part 1: Requirements.
EN 274-2, Waste fittings for sanitary appliances - Part 2: Test methods.
3 Terms and definitions
For the purpose of this standard the terms and definitions given in EN 274-1 apply.
4 Quality control
4.1 General
Products manufactured to EN 274-1 and EN 274-2 shall be subjected to a quality control procedure as follows:
a) type testing;
b) factory production control.
The control by a
...