EN 1429:2009
(Main)Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving
Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving
This European Standard specifies methods utilizing sieving for the determination of the quantity of coarse particles of binder present in bitumen emulsions, and for the determination of storage stability.
WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
Bitumen und bitumenhaltige Bindemittel - Bestimmung des Siebrückstandes von Bitumenemulsionen und Bestimmung der Lagerbeständigkeit durch Sieben
Diese Europäische Norm legt Verfahren mittels Sieben zur Bestimmung des Anteils an groben Bestandteilen
in Bindemitteln aus Bitumenemulsionen und zur Bestimmung der Lagerbeständigkeit fest.
WARNUNG — Die Anwendung dieser Norm kann den Umgang mit gefährlichen Substanzen und Ausrüstungsteilen
und die Ausführung gefährlicher Arbeitsgänge einschließen. Diese Norm erhebt nicht
den Anspruch, alle mit ihrer Anwendung verbundenen Sicherheitsprobleme anzusprechen. Es liegt in
der Verantwortung des Anwenders dieser Norm, geeignete Verhaltensregeln zur Sicherheit und Gesundheit
festzulegen und die Anwendbarkeit einschränkender Vorschriften vor der Anwendung zu
bestimmen.
Bitumes et liants bitumineux - Détermination du résidu sur tamis des émulsions de bitume et détermination de la stabilité au stockage par tamisage
La présente norme européenne prescrit, au moyen d’essai de tamisage, des méthodes de détermination de la
quantité de grosses particules de liants présentes dans les émulsions de bitume, ainsi que la détermination de
la stabilité au stockage des émulsions de bitume.
AVERTISSEMENT — L'utilisation de la présente Norme européenne peut impliquer l'intervention de
produits, d'opérations et d'équipements à caractère dangereux. La présente Norme européenne n’est
pas censée aborder tous les problèmes de sécurité associés à son usage. Il est de la responsabilité
de l'utilisateur de consulter et d'établir des règles de sécurité et d'hygiène appropriées et de
déterminer l'applicabilité des restrictions réglementaires avant utilisation.
Bitumen in bitumenska veziva - Določevanje ostanka bitumenskih emulzij na situ in ugotavljanje stabilnosti pri skladiščenju s sejanjem
General Information
- Status
- Withdrawn
- Publication Date
- 10-Mar-2009
- Withdrawal Date
- 11-Jun-2013
- Technical Committee
- CEN/TC 336 - Bituminous binders
- Drafting Committee
- CEN/TC 336/WG 2 - Emulsions and fluxed bitumens
- Current Stage
- 9960 - Withdrawal effective - Withdrawal
- Start Date
- 12-Jun-2013
- Completion Date
- 12-Jun-2013
- Directive
- 89/106/EEC - Construction products
Relations
- Effective Date
- 23-Mar-2009
- Effective Date
- 21-May-2011
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN ISO 16135:2006 - Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006) - Effective Date
- 28-Jan-2026
- Referred By
EN ISO 16137:2006 - Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006) - Effective Date
- 28-Jan-2026
- Effective Date
- 28-Jan-2026
- Referred By
EN ISO 21787:2006 - Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006) - Effective Date
- 28-Jan-2026
- Referred By
EN ISO 16139:2006 - Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006) - Effective Date
- 28-Jan-2026
Get Certified
Connect with accredited certification bodies for this standard
ICC Evaluation Service
Nonprofit organization that performs technical evaluations of building products.
Kiwa BDA Testing
Building and construction product certification.
Aboma Certification B.V.
Specialized in construction, metal, and transport sectors.
Sponsored listings
Frequently Asked Questions
EN 1429:2009 is a standard published by the European Committee for Standardization (CEN). Its full title is "Bitumen and bituminous binders - Determination of residue on sieving of bituminous emulsions, and determination of storage stability by sieving". This standard covers: This European Standard specifies methods utilizing sieving for the determination of the quantity of coarse particles of binder present in bitumen emulsions, and for the determination of storage stability. WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
This European Standard specifies methods utilizing sieving for the determination of the quantity of coarse particles of binder present in bitumen emulsions, and for the determination of storage stability. WARNING — The use of this standard may involve hazardous materials, operations and equipment. This standard does not purport to address all of the safety problems associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
EN 1429:2009 is classified under the following ICS (International Classification for Standards) categories: 75.140 - Waxes, bituminous materials and other petroleum products; 91.100.50 - Binders. Sealing materials. The ICS classification helps identify the subject area and facilitates finding related standards.
EN 1429:2009 has the following relationships with other standards: It is inter standard links to EN 1429:1999, EN 1429:2013, EN 13312-6:2001, EN 58:2012, EN ISO 3696:1995, EN 12503-2:2001, EN 12594:2024, EN ISO 16138:2006, EN ISO 16135:2006, EN ISO 16137:2006, EN ISO 16136:2006, EN ISO 21787:2006, EN ISO 16139:2006. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.
EN 1429:2009 is associated with the following European legislation: EU Directives/Regulations: 305/2011, 89/106/EEC. When a standard is cited in the Official Journal of the European Union, products manufactured in conformity with it benefit from a presumption of conformity with the essential requirements of the corresponding EU directive or regulation.
EN 1429:2009 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Bitumen und bitumenhaltige Bindemittel - Bestimmung des Siebrückstandes von Bitumenemulsionen und Bestimmung der Lagerbeständigkeit durch SiebenBitumes et liants bitumineux - Détermination du résidu sur tamis des émulsions de bitume et détermination de la stabilité au stockage par tamisageBitumen and bituminous binders - Determination of residue on sieving of bitumen emulsions, and determination of storage stability by sieving91.100.50Veziva. Tesnilni materialiBinders. Sealing materials75.140Voski, bitumni in drugi naftni proizvodiWaxes, bituminous materials and other petroleum productsICS:Ta slovenski standard je istoveten z:EN 1429:2009SIST EN 1429:2009en,fr,de01-julij-2009SIST EN 1429:2009SLOVENSKI
STANDARDSIST EN 1429:20001DGRPHãþD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1429March 2009ICS 75.140; 91.100.50Supersedes EN 1429:1999
English VersionBitumen and bituminous binders - Determination of residue onsieving of bituminous emulsions, and determination of storagestability by sievingBitumes et liants bitumineux - Détermination du résidu surtamis des émulsions de bitume et détermination de lastabilité au stockage par tamisageBitumen und bitumenhaltige Bindemittel - Bestimmung desSiebrückstandes von Bitumenemulsionen und Bestimmungder Lagerbeständigkeit durch SiebenThis European Standard was approved by CEN on 17 January 2009.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre:
Avenue Marnix 17,
B-1000 Brussels© 2009 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1429:2009: ESIST EN 1429:2009
Storage stability is determined as the amount of binder retained on the sieve with a mesh size of 0,500 mm after a defined storage period (n days). SIST EN 1429:2009
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.
Loading comments...