EN ISO 12570:2000/A1:2013
(Amendment)Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature - Amendment 1 (ISO 12570:2000/Amd 1:2013)
Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature - Amendment 1 (ISO 12570:2000/Amd 1:2013)
2012-12-06 GVN: Draft for // vote available at ISO/CS (see notification in dataservice on 2012-12-04)
Wärme- und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten - Bestimmung des Feuchtegehaltes durch Trocknen bei erhöhter Temperatur - Änderung 1 (ISO 12570:2000/Amd 1:2013)
N/A
Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination du taux d'humidité par séchage à chaud - Amendement 1 (ISO 12570:2000/Amd 1:2013)
Higrotermalno obnašanje gradbenih materialov in proizvodov - Ugotavljanje deleža vlage s sušenjem pri povišanih temperaturah - Dopolnilo 1 (ISO 12570:2000/A1:2013)
Ta standard, ki se uporablja za porozne vodoprepustne materiale, določa splošno metodo za ugotavljanje deleža razpoložljive vlage v gradbenih materialih s sušenjem pri visoki temperaturi. Standard ne določa metode vzorčenja.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 12570:2001/oprA1:2012
01-junij-2012
Higrotermalne lastnosti gradbenih materialov in proizvodov - Ugotavljanje deleža
vlage s sušenjem pri povišanih temperaturah - Dopolnilo 1 (ISO 12570:2000/DAM
1:2012)
Hygrothermal performance of building materials and products - Determination of
moisture content by drying at elevated temperature - Amendment 1 (ISO
12570:2000/DAM 1:2012)
Wärme- und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten -
Bestimmung des Feuchtegehaltes durch Trocknen bei erhöhter Temperatur - Änderung
1 (ISO 12570:2000/DAM 1:2012)
Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination
du taux d'humidité par séchage à chaud - Amendement 1 (ISO 12570:2000/DAM
1:2012)
Ta slovenski standard je istoveten z: EN ISO 12570:2000/prA1
ICS:
91.100.01 Gradbeni materiali na Construction materials in
splošno general
SIST EN ISO 12570:2001/oprA1:2012 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
SIST EN ISO 12570:2001/oprA1:2012
SIST EN ISO 12570:2001/oprA1:2012
EUROPEAN STANDARD
DRAFT
EN ISO 12570:2000
NORME EUROPÉENNE
EUROPÄISCHE NORM
prA1
March 2012
ICS 91.100.01
English Version
Hygrothermal performance of building materials and products -
Determination of moisture content by drying at elevated
temperature - Amendment 1 (ISO 12570:2000/DAM 1:2012)
Performance hygrothermique des matériaux et produits Wärme- und feuchtetechnisches Verhalten von Baustoffen
pour le bâtiment - Détermination du taux d'humidité par
und Bauprodukten - Bestimmung des Feuchtegehaltes
séchage à chaud - Amendement 1 (ISO 12570:2000/DAM durch Trocknen bei erhöhter Temperatur - Änderung 1 (ISO
1:2012) 12570:2000/DAM 1:2012)
This draft amendment is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee CEN/TC 89.
This draft amendment A1, if approved, will modify the European Standard EN ISO 12570:2000. If this draft becomes an amendment, CEN
members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this amendment
into the relevant national standard without any alteration.
This draft amendment was established by CEN in three official versions (English, French, German). A version in any other language made
by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has
the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are aware and to
provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2012 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12570:2000/prA1:2012: E
worldwide for CEN national Members.
SIST EN ISO 12570:2001/oprA1:2012
EN ISO 12570:2000/prA1:2012 (E)
Contents Page
Foreword .3
SIST EN ISO 12570:2001/oprA1:2012
EN ISO 12570:2000/prA1:2012 (E)
Foreword
This document (EN ISO 12570:2000/prA1:2012) has been prepared by Technical Committee ISO/TC 163
“Thermal performance and energy use in the built environment” in collaboration with Technical Committee
CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of which is held by
SIS.
This document is currently submitted to the parallel Enquiry.
Endorsement notice
The text of ISO 12570:2000/DAM 1:2012 has been approved by CEN as a EN ISO 12570:2000/prA1:2012
without any modification.
SIST EN ISO 12570:2001/oprA1:2012
SIST EN ISO 12570:2001/oprA1:2012
DRAFT AMENDMENT ISO 12570:2000/DAM 1
ISO/TC 163/SC 1 Secretariat: DIN
Voting begins on Voting terminates on
2012-03-29 2012-08-29
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Hygrothermal performance of building materials and
products — Determination of moisture content by drying at
elevated temperature
AMENDMENT 1
Performance hygrothermique des matériaux et produits pour le bâtiment — Détermination du taux d'hum
...
SLOVENSKI STANDARD
01-september-2013
Higrotermalno obnašanje gradbenih materialov in proizvodov - Ugotavljanje deleža
vlage s sušenjem pri povišanih temperaturah - Dopolnilo 1 (ISO
12570:2000/A1:2013)
Hygrothermal performance of building materials and products - Determination of
moisture content by drying at elevated temperature - Amendment 1 (ISO
12570:2000/A1:2013)
Wärme- und feuchtetechnisches Verhalten von Baustoffen und Bauprodukten -
Bestimmung des Feuchtegehaltes durch Trocknen bei erhöhter Temperatur - Änderung
1 (ISO 12570:2000/A1:2013)
Performance hygrothermique des matériaux et produits pour le bâtiment - Détermination
du taux d'humidité par séchage à chaud - Amendement 1 (ISO 12570:2000/A1:2013)
Ta slovenski standard je istoveten z: EN ISO 12570:2000/A1:2013
ICS:
91.100.01 Gradbeni materiali na Construction materials in
splošno general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 12570:2000/A1
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2013
ICS 91.100.01
English Version
Hygrothermal performance of building materials and products -
Determination of moisture content by drying at elevated
temperature - Amendment 1 (ISO 12570:2000/Amd 1:2013)
Performance hygrothermique des matériaux et produits Wärme- und feuchtetechnisches Verhalten von Baustoffen
pour le bâtiment - Détermination du taux d'humidité par und Bauprodukten - Bestimmung des Feuchtegehaltes
séchage à chaud - Amendement 1 (ISO 12570:2000/Amd durch Trocknen bei erhöhter Temperatur - Änderung 1 (ISO
1:2013) 12570:2000/Amd 1:2013)
This amendment A1 modifies the European Standard EN ISO 12570:2000; it was approved by CEN on 22 May 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2013 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 12570:2000/A1:2013: E
worldwide for CEN national Members.
Contents Page
Foreword .3
Foreword
This document (EN ISO 12570:2000/A1:2013) has been prepared by Technical Committee ISO/TC 163
“Thermal performance and energy use in the built environment” in collaboration with Technical Committee
CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of which is held by
SIS.
This Amendment to the European Standard EN ISO 12570:2000 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2013, and
conflicting national standards shall be withdrawn at the latest by December 2013.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN-CENELEC Internal Regulati
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.