EN 774:1996/A1:1997
(Amendment)Garden equipment - Hand held, integrally powered hedge trimmers - Safety
- BACK
- 18-Feb-1997
- 14-Jul-2009
- 65.060.80
- 89/392/EEC
- 98/37/EC
- M/079
- CEN/TC 144
Garden equipment - Hand held, integrally powered hedge trimmers - Safety
Migrated from Progress Sheet (TC Comment) (2000-07-10): Update of the target dates following mail from Duranton 960305 ++ Will be submitted to a UAP.
Gartengeräte - Tragbare motorbetriebene Heckenscheren - Sicherheit
Matériel de jardinage - Taille-haies portatifs à moteur incorporé - Sécurité
Oprema za nego vrta - Prenosni motorni obrezovalniki žive meje - Varnost
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN 774:1996/A1:2000
01-junij-2000
Oprema za nego vrta - Prenosni motorni obrezovalniki žive meje - Varnost
Garden equipment - Hand held, integrally powered hedge trimmers - Safety
Gartengeräte - Tragbare motorbetriebene Heckenscheren - Sicherheit
Matériel de jardinage - Taille-haies portatifs a moteur incorporé - Sécurité
Ta slovenski standard je istoveten z: EN 774:1996/A1:1997
ICS:
65.060.70 Vrtnarska oprema Horticultural equipment
SIST EN 774:1996/A1:2000 en
2003-01
...
This May Also Interest You
This document specifies basic test and condition requirements for deflection pulleys and sling gear which are attached to ropes and rope end connectors in forestal applications.
It is applicable to forestal hauling operations including rope-assisted felling.
This document is applicable to the following elements, sling gear and fastening elements:
- deflection pulleys used in forestal hauling operation (see 3.22);
- choker ropes;
- choker chains;
- radio-controlled chokers;
- shackles;
- round slings/tree protectors;
- tree towing ropes;
- rope slide hooks/rope sliders/choker hooks.
It is not applicable to the following sling gear:
- the functional safety of radio-controlled chokers;
- non-sheathed tree towing ropes made of synthetic fibres;
- slings and deflection pulleys for the function and structure of mobile yarders as defined in EN 16517:2021 (e.g. for the installation of the haul-back line).
- Standard21 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft20 pagesEnglish languagesale 10% offe-Library read for×1 day
- 14-Feb-2023
- 65.060.80
- CEN/TC 144
This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning for tree service of portable, combustion-engine, hand-held chain-saws having a maximum mass of 4,3 kg (without the guide bar and saw-chain and with tanks empty).
The chain-saws are intended to be used, with the right hand on the rear handle and left hand on the front handle, by a trained operator.
Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex B).
This document is applicable to chain-saws manufactured after its date of publication.
NOTE Figure 1 shows an example of a chain-saw within the scope of this document.
- Standard41 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft38 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Aug-2022
- 29-Nov-2022
- 65.060.80
- 2006/42/EC
- 98/37/EC
- M/079
- M/396
- CEN/TC 144
This document specifies safety requirements and measures for verification for the design, construction, transporting and commissioning of portable, combustion-engine, hand-held chain-saws. The chain-saws are intended to be used for forest work by only one operator, with the right hand on the rear handle and left hand on the front handle.
Dismantling and scrapping of the product is not covered by this document. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events, with the exception of kickback and balance for machines with an engine displacement of more than 80 cm3, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document is applicable to chain-saws manufactured after its date of publication.
- Standard36 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft33 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Aug-2022
- 29-Nov-2022
- 65.060.80
- 2006/42/EC
- 98/37/EC
- M/079
- M/396
- CEN/TC 144
- Amendment24 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft5 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Aug-2022
- 29-Nov-2022
- 65.060.80
- 2006/42/EC
- M/396
- CEN/TC 144
This document defines the dimensions and specifies the performance and safety requirements for traction aid winches used in forestry for assisting supported machines while going uphill and downhill (pulling and braking).
This document is applicable to fixed and detachable winches and their components, connections and communications, which are used with mobile and self-propelled forestry machinery as defined in ISO 6814:2009 and earth moving machinery as defined in ISO 6165:2012. It is also applicable to remote traction aid winch systems which are installed on a position away from the supported machine. In addition, this document defines requirements for the assembly of supported machine and traction aid winch. It is not applicable to winches which are not using a controlled rope force while going downhill and winches used for skidding, hoisting operations on cranes, draglines, high lead logging, rope logging systems or yarding. The kind of prime mover used to drive a traction aid winch does not limit the applicability of this document. This document is intended to be applied to traction aid systems used on machines where, without use of these systems, the machine remains stationary on slopes under its independent control (see Annex E).
Forestry machines, as defined in ISO 6814:2009, that are used as anchor or supported machines are not in the scope of this document. Requirements for the safety of many types of supported machines are within the scope of ISO 11850:2011.
This document is not applicable to traction aid winches manufactured before the date of its publication.
- Standard53 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft33 pagesEnglish languagesale 10% offe-Library read for×1 day
- 29-Jun-2022
- 29-Sep-2022
- 65.060.80
- 2006/42/EC
- M/396
- CEN/TC 144
This document specifies a vibration test code for determining, efficiently and under standardized conditions, the magnitude of vibration at the handles of portable hand-held, internal-combustion-engine-powered forest and garden machinery, including chain-saws, brush-cutters, grass-trimmers, edgers, pole-mounted powered pruners, hedge-trimmers and garden-blowers.
Although the magnitudes measured are obtained in an artificial operation, they nevertheless give an indication of the values to be found in a real work situation.
Vibration test codes, as described in this document, enable the manufacturer to verify the effort regarding low vibration design.
- Standard39 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft37 pagesEnglish languagesale 10% offe-Library read for×1 day
- 30-Mar-2022
- 29-Jun-2022
- 13.160
- 65.060.80
- 2006/42/EC
- M/079
- M/396
- CEN/TC 144
This document gives safety requirements and measures for their verification for the design and construction of portable hand-held, powered brush-cutters and grass-trimmers (hereafter called machines) having an integral combustion engine as their power unit and mechanical power transmission between the power source and the cutting attachment. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations and hazardous events relevant to these machines, as well as when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades.
NOTE See Annex C for a list of significant hazards.
This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication.
- Standard46 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft48 pagesEnglish languagesale 10% offe-Library read for×1 day
- 29-Mar-2022
- 29-Sep-2022
- 65.060.80
- 2006/42/EC
- M/396
- CEN/TC 144
This document specifies safety requirements, and measures for their verification, for the design and construction of portable, hand-held, powered brush-cutters and grass-trimmers with a backpack-mounted combustion engine power source and mechanical power transmission between the power source and the cutting attachment (hereafter referred to as “machine”). Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document, taken together with the relevant clauses of ISO 11806-1:2021 (see 4.1), deals with all significant hazards, hazardous situations and hazardous events, with the exception of whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the time of publication.
NOTE 2 See Annex A, together with ISO 11806-1:2021, Annex A, for a list of significant hazards.
This document is applicable to portable, hand-held, powered brush-cutters and grass-trimmers manufactured after its date of publication.
This document is not applicable to machines equipped with metallic cutting attachments consisting of more than one piece, such as pivoting chains or flail blades.
- Standard21 pagesEnglish languagesale 10% offe-Library read for×1 day
- Standard21 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft18 pagesEnglish languagesale 10% offe-Library read for×1 day
- 15-Mar-2022
- 29-Sep-2022
- 65.060.80
- 2006/42/EC
- M/396
- CEN/TC 144
This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners with a backpack power unit (hereafter referred to as “machine”). These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a combination of saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document, together with the relevant sections of ISO 11680-1:2021, deals with all significant hazards, hazardous situations or hazardous events, with the exception of electric shock from contact with overhead electric lines (apart from warnings and advices for inclusion in the instructions) and whole-body vibration from the backpack power unit, relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer.
NOTE 1 A standardized test procedure for measuring whole-body vibration from the backpack power unit is not available at the date of publication.
NOTE 2 See Annex A for a list of significant hazards.
This document is applicable to portable, hand-held, pole-mounted powered pruners with backpack power unit manufactured after its date of publication.
- Standard16 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft11 pagesEnglish languagesale 10% offe-Library read for×1 day
- 27-Feb-2022
- 30-May-2022
- 65.060.80
- 2006/42/EC
- 98/37/EC
- M/079
- M/396
- CEN/TC 144
This document specifies safety requirements and measures for their verification for the design and construction of portable, hand-held, pole-mounted powered pruners (hereafter named “machine”), including extendable and telescopic machines, having an integral combustion engine as their power source. These machines use a power transmission shaft to transmit power to a cutting attachment consisting of a saw-chain and guide bar, a reciprocating saw blade or a single-piece circular saw blade with a 205 mm maximum outside diameter. Methods for the elimination or reduction of hazards arising from the use of these machines and the type of information on safe working practices to be provided by the manufacturer are specified.
This document deals with all significant hazards, hazardous situations or hazardous events with the exception of electric shock from contact with overhead electric lines (apart from warnings and advice for inclusion in the instructions), relevant to these machines when they are used as intended and under conditions of misuse which are reasonably foreseeable by the manufacturer (see Annex A).
This document is applicable to portable, hand-held, pole-mounted powered pruners manufactured after its date of publication.
Brush cutters with a circular saw blade are not included in the scope of this document.
NOTE Brush cutter requirements are outlined in ISO 11806-1:2021.
- Standard41 pagesEnglish languagesale 10% offe-Library read for×1 day
- Draft34 pagesEnglish languagesale 10% offe-Library read for×1 day
- 23-Nov-2021
- 30-May-2022
- 65.060.80
- 2006/42/EC
- 98/37/EC
- M/079
- M/396
- CEN/TC 144
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.