Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form

This part of EN 754 specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn hexagonal bars having widths across flats in the range from 3 mm up to 80 mm.

Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil 6: Sechskantstangen, Grenzabmaße und Formtoleranzen

Dieser Teil der EN 754 legt die Grenzabmaße und Formtoleranzen für gezogene Sechskantstangen aus Aluminium und Aluminiumlegierungen mit einer Schlüsselweite von 3 mm bis 80 mm fest.

Aluminium et alliages d'aluminium - Barres et tubes étirés - Partie 6: Barres hexagonales, tolérances sur dimensions et forme

La présente partie de la norme EN 754 spécifie les tolérances sur dimensions et forme des barres hexagonales étirées en aluminium et alliages d'aluminium de dimension sur plats de 3 mm à 80 mm.

Aluminij in aluminijeve zlitine - Hladno vlečene palice/drogovi in cevi - 6. del: Palice s šesterokotnim prerezom, odstopki mer in tolerance oblik

General Information

Status
Withdrawn
Publication Date
21-Nov-1995
Withdrawal Date
18-Mar-2008
ICS
77.150.10 - Aluminium products
Technical Committee
CEN/TC 132 - Aluminium and aluminium alloys
Drafting Committee
CEN/TC 132/WG 5 - Extruded and drawn products
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
19-Mar-2008
Completion Date
19-Mar-2008
Ref Project
SIST EN 754-6:1998 - Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form

Relations

Replaced By
EN 754-6:2008 - Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form
Effective Date
22-Dec-2008
Referred By
EN 1999-1-1:2007 - Eurocode 9: Design of aluminium structures - Part 1-1: General structural rules
Effective Date
28-Jan-2026
Referred By
EN ISO 4894-2:1999 - Plastics - Styrene/acrylonitrile (SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 4894-2:1995)
Effective Date
28-Jan-2026
Referred By
EN ISO 4589-2:1999 - Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test (ISO 4589-2:1996)
Effective Date
28-Jan-2026
Referred By
EN ISO 1622-2:1999 - Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 1622-2:1995)
Effective Date
28-Jan-2026

Get Certified

Connect with accredited certification bodies for this standard

Element Materials Technology

Materials testing and product certification.

UKAS United Kingdom Verified
Visit Website

Inštitut za kovinske materiale in tehnologije

Institute of Metals and Technology. Materials testing, metallurgical analysis, NDT.

SA Slovenia Verified
Visit Website

Sponsored listings

Frequently Asked Questions

EN 754-6:1995 is a standard published by the European Committee for Standardization (CEN). Its full title is "Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars, tolerances on dimensions and form". This standard covers: This part of EN 754 specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn hexagonal bars having widths across flats in the range from 3 mm up to 80 mm.

This part of EN 754 specifies the tolerances on dimensions and form for aluminium and aluminium alloy cold drawn hexagonal bars having widths across flats in the range from 3 mm up to 80 mm.

EN 754-6:1995 is classified under the following ICS (International Classification for Standards) categories: 77.150.10 - Aluminium products. The ICS classification helps identify the subject area and facilitates finding related standards.

EN 754-6:1995 has the following relationships with other standards: It is inter standard links to EN 754-6:2008, EN 1999-1-1:2007, EN ISO 4894-2:1999, EN ISO 4589-2:1999, EN ISO 1622-2:1999. Understanding these relationships helps ensure you are using the most current and applicable version of the standard.

EN 754-6:1995 is available in PDF format for immediate download after purchase. The document can be added to your cart and obtained through the secure checkout process. Digital delivery ensures instant access to the complete standard document.

Standards Content (Sample)


SLOVENSKI STANDARD
01-april-1998
$OXPLQLMLQDOXPLQLMHYH]OLWLQH+ODGQRYOHþHQHSDOLFHGURJRYLLQFHYLGHO
3DOLFHVãHVWHURNRWQLPSUHUH]RPRGVWRSNLPHULQWROHUDQFHREOLN
Aluminium and aluminium alloys - Cold drawn rod/bar and tube - Part 6: Hexagonal bars,
tolerances on dimensions and form
Aluminium und Aluminiumlegierungen - Gezogene Stangen und Rohre - Teil 6:
Sechskantstangen, Grenzabmaße und Formtoleranzen
Aluminium et alliages d'aluminium - Barres et tubes étirés - Partie 6: Barres
hexagonales, tolérances sur dimensions et forme
Ta slovenski standard je istoveten z: EN 754-6:1995
ICS:
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega stand
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

Loading comments...